source: mainline/generic/src/main/main.c@ 7ee0e2f

/*
 * Copyright (C) 2001-2004 Jakub Jermar
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup main
 * @{
 */

/**
 * @file
 * @brief       Main initialization kernel function for all processors.
 *
 * During kernel boot, all processors, after architecture dependent
 * initialization, start executing code found in this file. After
 * bringing up all subsystems, control is passed to scheduler().
 *
 * The bootstrap processor starts executing main_bsp() while
 * the application processors start executing main_ap().
 *
 * @see scheduler()
 * @see main_bsp()
 * @see main_ap()
 */

#include <arch/asm.h>
#include <context.h>
#include <print.h>
#include <panic.h>
#include <debug.h>
#include <config.h>
#include <time/clock.h>
#include <proc/scheduler.h>
#include <proc/thread.h>
#include <proc/task.h>
#include <main/kinit.h>
#include <main/version.h>
#include <console/kconsole.h>
#include <cpu.h>
#include <align.h>
#include <interrupt.h>
#include <arch/mm/memory_init.h>
#include <mm/frame.h>
#include <mm/page.h>
#include <genarch/mm/page_pt.h>
#include <mm/tlb.h>
#include <mm/as.h>
#include <mm/slab.h>
#include <synch/waitq.h>
#include <synch/futex.h>
#include <arch/arch.h>
#include <arch.h>
#include <arch/faddr.h>
#include <typedefs.h>
#include <ipc/ipc.h>
#include <macros.h>
#include <adt/btree.h>
#include <console/klog.h>

#ifdef CONFIG_SMP
#include <arch/smp/apic.h>
#include <arch/smp/mps.h>
#endif /* CONFIG_SMP */
#include <smp/smp.h>

/** Global configuration structure. */
config_t config;

/** Initial user-space tasks */
init_t init = {
        0
};

context_t ctx;

/*
 * These 'hardcoded' variables will be intialized by
 * the linker or the low level assembler code with
 * appropriate sizes and addresses.
 */
__address hardcoded_load_address = 0;   /**< Virtual address of where the kernel is loaded. */
size_t hardcoded_ktext_size = 0;        /**< Size of the kernel code in bytes. */
size_t hardcoded_kdata_size = 0;        /**< Size of the kernel data in bytes. */

void main_bsp(void);
void main_ap(void);

/*
 * These two functions prevent stack from underflowing during the
 * kernel boot phase when SP is set to the very top of the reserved
 * space. The stack could get corrupted by a fooled compiler-generated
 * pop sequence otherwise.
 */
static void main_bsp_separated_stack(void);
#ifdef CONFIG_SMP
static void main_ap_separated_stack(void);
#endif

#define CONFIG_STACK_SIZE       ((1<<STACK_FRAMES)*STACK_SIZE)

/** Main kernel routine for bootstrap CPU.
 *
 * Initializes the kernel by bootstrap CPU.
 * This function passes control directly to
 * main_bsp_separated_stack().
 *
 * Assuming interrupts_disable().
 *
 */
void main_bsp(void)
{
        __address stackaddr;

        config.cpu_count = 1;
        config.cpu_active = 1;
        
        config.base = hardcoded_load_address;
        config.memory_size = get_memory_size();
        
        config.kernel_size = ALIGN_UP(hardcoded_ktext_size + hardcoded_kdata_size, PAGE_SIZE);
        stackaddr = config.base + config.kernel_size;
        
        /* Avoid placing kernel on top of init */
        count_t i;
        bool overlap = false;
        for (i = 0; i < init.cnt; i++)
                if (PA_overlaps(stackaddr, CONFIG_STACK_SIZE, init.tasks[i].addr, init.tasks[i].size)) {
                        stackaddr = ALIGN_UP(init.tasks[i].addr + init.tasks[i].size, CONFIG_STACK_SIZE);
                        init.tasks[i].size = ALIGN_UP(init.tasks[i].size, CONFIG_STACK_SIZE) + CONFIG_STACK_SIZE;
                        overlap = true;
                }
        
        if (!overlap)
                config.kernel_size += CONFIG_STACK_SIZE;
        
        context_save(&ctx);
        context_set(&ctx, FADDR(main_bsp_separated_stack), stackaddr, THREAD_STACK_SIZE);
        context_restore(&ctx);
        /* not reached */
}


/** Main kernel routine for bootstrap CPU using new stack.
 *
 * Second part of main_bsp().
 *
 */
void main_bsp_separated_stack(void) 
{
        task_t *k;
        thread_t *t;
        count_t i;
        
        the_initialize(THE);

        /*
         * kconsole data structures must be initialized very early
         * because other subsystems will register their respective
         * commands.
         */
        kconsole_init();
        
        /*
         * Exception handler initialization, before architecture
         * starts adding its own handlers
         */
        exc_init();

        /*
         * Memory management subsystems initialization.
         */     
        arch_pre_mm_init();
        frame_init();           /* Initialize at least 1 memory segment big enough for slab to work */
        slab_cache_init();
        btree_init();
        as_init();
        page_init();
        tlb_init();
        arch_post_mm_init();

        version_print();
        printf("%.*p: hardcoded_ktext_size=%zdK, hardcoded_kdata_size=%zdK\n", sizeof(__address) * 2, config.base, hardcoded_ktext_size >> 10, hardcoded_kdata_size >> 10);

        arch_pre_smp_init();
        smp_init();
        
        slab_enable_cpucache(); /* Slab must be initialized AFTER we know the number of processors */

        printf("config.memory_size=%zdM\n", config.memory_size >> 20);
        printf("config.cpu_count=%zd\n", config.cpu_count);
        cpu_init();
        
        calibrate_delay_loop();
        clock_counter_init();
        timeout_init();
        scheduler_init();
        task_init();
        thread_init();
        futex_init();
        klog_init();
        
        for (i = 0; i < init.cnt; i++)
                printf("init[%zd].addr=%.*p, init[%zd].size=%zd\n", i, sizeof(__address) * 2, init.tasks[i].addr, i, init.tasks[i].size);
        
        ipc_init();

        /*
         * Create kernel task.
         */
        k = task_create(AS_KERNEL, "KERNEL");
        if (!k)
                panic("can't create kernel task\n");
        
        /*
         * Create the first thread.
         */
        t = thread_create(kinit, NULL, k, 0, "kinit");
        if (!t)
                panic("can't create kinit thread\n");
        thread_ready(t);
        
        /*
         * This call to scheduler() will return to kinit,
         * starting the thread of kernel threads.
         */
        scheduler();
        /* not reached */
}


#ifdef CONFIG_SMP
/** Main kernel routine for application CPUs.
 *
 * Executed by application processors, temporary stack
 * is at ctx.sp which was set during BP boot.
 * This function passes control directly to
 * main_ap_separated_stack().
 *
 * Assuming interrupts_disable()'d.
 *
 */
void main_ap(void)
{
        /*
         * Incrementing the active CPU counter will guarantee that the
         * pm_init() will not attempt to build GDT and IDT tables again.
         * Neither frame_init() will do the complete thing. Neither cpu_init()
         * will do.
         */
        config.cpu_active++;

        /*
         * The THE structure is well defined because ctx.sp is used as stack.
         */
        the_initialize(THE);
        
        arch_pre_mm_init();
        frame_init();
        page_init();
        tlb_init();
        arch_post_mm_init();
        
        cpu_init();
        
        calibrate_delay_loop();

        l_apic_init();
        l_apic_debug();

        the_copy(THE, (the_t *) CPU->stack);

        /*
         * If we woke kmp up before we left the kernel stack, we could
         * collide with another CPU coming up. To prevent this, we
         * switch to this cpu's private stack prior to waking kmp up.
         */
        context_set(&CPU->saved_context, FADDR(main_ap_separated_stack), (__address) CPU->stack, CPU_STACK_SIZE);
        context_restore(&CPU->saved_context);
        /* not reached */
}


/** Main kernel routine for application CPUs using new stack.
 *
 * Second part of main_ap().
 *
 */
void main_ap_separated_stack(void)
{
        /*
         * Configure timeouts for this cpu.
         */
        timeout_init();

        waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);
        scheduler();
        /* not reached */
}
#endif /* CONFIG_SMP */

/** @}
 */