source: mainline/generic/src/main/main.c@ 5d2ab23

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 5d2ab23 was 5d2ab23, checked in by Ondrej Palkovsky <ondrap@…>, 19 years ago

Commit of the falloc_bad branch to trunk (719:723).

  • Property mode set to 100644
File size: 7.2 KB
Line 
1/*
2 * Copyright (C) 2001-2004 Jakub Jermar
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29#include <arch/asm.h>
30#include <context.h>
31#include <print.h>
32#include <panic.h>
33#include <debug.h>
34#include <config.h>
35#include <time/clock.h>
36#include <proc/scheduler.h>
37#include <proc/thread.h>
38#include <proc/task.h>
39#include <main/kinit.h>
40#include <main/version.h>
41#include <console/kconsole.h>
42#include <cpu.h>
43#include <align.h>
44#include <interrupt.h>
45#include <arch/mm/memory_init.h>
46#include <mm/heap.h>
47#include <mm/frame.h>
48#include <mm/page.h>
49#include <genarch/mm/page_pt.h>
50#include <mm/tlb.h>
51#include <mm/as.h>
52#include <synch/waitq.h>
53#include <arch/arch.h>
54#include <arch.h>
55#include <arch/faddr.h>
56#include <typedefs.h>
57
58#ifdef CONFIG_SMP
59#include <arch/smp/apic.h>
60#include <arch/smp/mps.h>
61#endif /* CONFIG_SMP */
62#include <smp/smp.h>
63
64config_t config; /**< Global configuration structure. */
65
66context_t ctx;
67
68/**
69 * These 'hardcoded' variables will be intialized by
70 * the linker or the low level assembler code with
71 * appropriate sizes and addresses.
72 */
73__address hardcoded_load_address = 0;
74size_t hardcoded_ktext_size = 0;
75size_t hardcoded_kdata_size = 0;
76
77__address init_addr = 0;
78size_t init_size = 0;
79
80void main_bsp(void);
81void main_ap(void);
82
83/*
84 * These two functions prevent stack from underflowing during the
85 * kernel boot phase when SP is set to the very top of the reserved
86 * space. The stack could get corrupted by a fooled compiler-generated
87 * pop sequence otherwise.
88 */
89static void main_bsp_separated_stack(void);
90#ifdef CONFIG_SMP
91static void main_ap_separated_stack(void);
92#endif
93
94/** Bootstrap CPU main kernel routine
95 *
96 * Initializes the kernel by bootstrap CPU.
97 * This function passes control directly to
98 * main_bsp_separated_stack().
99 *
100 * Assuming interrupts_disable().
101 *
102 */
103void main_bsp(void)
104{
105 config.cpu_count = 1;
106 config.cpu_active = 1;
107
108 config.base = hardcoded_load_address;
109 config.memory_size = get_memory_size();
110 config.init_addr = init_addr;
111 config.init_size = init_size;
112
113 if (init_size > 0)
114 config.heap_addr = init_addr + init_size;
115 else
116 config.heap_addr = hardcoded_load_address + hardcoded_ktext_size + hardcoded_kdata_size;
117
118 config.heap_size = CONFIG_HEAP_SIZE + (config.memory_size / FRAME_SIZE) * sizeof(frame_t);
119
120 config.kernel_size = ALIGN_UP(config.heap_addr - hardcoded_load_address + config.heap_size, PAGE_SIZE);
121 config.heap_delta = config.kernel_size - (config.heap_addr - hardcoded_load_address + config.heap_size);
122 config.kernel_size = config.kernel_size + CONFIG_STACK_SIZE;
123
124 context_save(&ctx);
125 context_set(&ctx, FADDR(main_bsp_separated_stack), config.base + config.kernel_size - CONFIG_STACK_SIZE, CONFIG_STACK_SIZE);
126 context_restore(&ctx);
127 /* not reached */
128}
129
130
131/** Bootstrap CPU main kernel routine stack wrapper
132 *
133 * Second part of main_bsp().
134 *
135 */
136void main_bsp_separated_stack(void)
137{
138 as_t *as;
139 task_t *k;
140 thread_t *t;
141
142 the_initialize(THE);
143
144 /*
145 * kconsole data structures must be initialized very early
146 * because other subsystems will register their respective
147 * commands.
148 */
149 kconsole_init();
150
151 /* Exception handler initialization, before architecture
152 * starts adding its own handlers
153 */
154 exc_init();
155
156 arch_pre_mm_init();
157 early_heap_init(config.heap_addr, config.heap_size + config.heap_delta);
158 frame_init();
159 page_init();
160 tlb_init();
161 arch_post_mm_init();
162
163 version_print();
164
165 printf("%P: hardcoded_ktext_size=%dK, hardcoded_kdata_size=%dK\n",
166 config.base, hardcoded_ktext_size/1024, hardcoded_kdata_size/1024);
167
168 arch_pre_smp_init();
169 smp_init();
170 printf("config.memory_size=%dM\n", config.memory_size/(1024*1024));
171 printf("config.cpu_count=%d\n", config.cpu_count);
172
173 cpu_init();
174
175 calibrate_delay_loop();
176
177 timeout_init();
178 scheduler_init();
179 task_init();
180 thread_init();
181
182 if (config.init_size > 0)
183 printf("config.init_addr=%X, config.init_size=%d\n", config.init_addr, config.init_size);
184
185 /*
186 * Create kernel address space.
187 */
188 as = as_create(GET_PTL0_ADDRESS());
189 if (!as)
190 panic("can't create kernel address space\n");
191
192 /*
193 * Create kernel task.
194 */
195 k = task_create(as);
196 if (!k)
197 panic("can't create kernel task\n");
198
199 /*
200 * Create the first thread.
201 */
202 t = thread_create(kinit, NULL, k, 0);
203 if (!t)
204 panic("can't create kinit thread\n");
205 thread_ready(t);
206
207 /*
208 * This call to scheduler() will return to kinit,
209 * starting the thread of kernel threads.
210 */
211 scheduler();
212 /* not reached */
213}
214
215
216#ifdef CONFIG_SMP
217/** Application CPUs main kernel routine
218 *
219 * Executed by application processors, temporary stack
220 * is at ctx.sp which was set during BP boot.
221 * This function passes control directly to
222 * main_ap_separated_stack().
223 *
224 * Assuming interrupts_disable()'d.
225 *
226 */
227void main_ap(void)
228{
229 /*
230 * Incrementing the active CPU counter will guarantee that the
231 * pm_init() will not attempt to build GDT and IDT tables again.
232 * Neither frame_init() will do the complete thing. Neither cpu_init()
233 * will do.
234 */
235 config.cpu_active++;
236
237 /*
238 * The THE structure is well defined because ctx.sp is used as stack.
239 */
240 the_initialize(THE);
241
242 arch_pre_mm_init();
243 frame_init();
244 page_init();
245 tlb_init();
246 arch_post_mm_init();
247
248 cpu_init();
249
250 calibrate_delay_loop();
251
252 l_apic_init();
253 l_apic_debug();
254
255 the_copy(THE, (the_t *) CPU->stack);
256
257 /*
258 * If we woke kmp up before we left the kernel stack, we could
259 * collide with another CPU coming up. To prevent this, we
260 * switch to this cpu's private stack prior to waking kmp up.
261 */
262 context_set(&CPU->saved_context, FADDR(main_ap_separated_stack), (__address) CPU->stack, CPU_STACK_SIZE);
263 context_restore(&CPU->saved_context);
264 /* not reached */
265}
266
267
268/** Application CPUs main kernel routine stack wrapper
269 *
270 * Second part of main_ap().
271 *
272 */
273void main_ap_separated_stack(void)
274{
275 /*
276 * Configure timeouts for this cpu.
277 */
278 timeout_init();
279
280 waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);
281 scheduler();
282 /* not reached */
283}
284#endif /* CONFIG_SMP */
Note: See TracBrowser for help on using the repository browser.