source: mainline/generic/src/main/main.c@ 2677758

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 2677758 was 2677758, checked in by Jakub Jermar <jakub@…>, 20 years ago

Add chardev_t.
This type is meant to abstract any input character device such as keyboard, serial port etc.
Add stdin.
Add dummy kconsole.

  • Property mode set to 100644
File size: 6.9 KB
Line 
1/*
2 * Copyright (C) 2001-2004 Jakub Jermar
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29#include <arch/asm.h>
30#include <context.h>
31#include <print.h>
32#include <panic.h>
33#include <config.h>
34#include <time/clock.h>
35#include <proc/scheduler.h>
36#include <proc/thread.h>
37#include <proc/task.h>
38#include <main/kinit.h>
39#include <cpu.h>
40#include <align.h>
41
42#ifdef CONFIG_SMP
43#include <arch/smp/apic.h>
44#include <arch/smp/mps.h>
45#endif /* CONFIG_SMP */
46
47#include <smp/smp.h>
48
49#include <arch/mm/memory_init.h>
50#include <mm/heap.h>
51#include <mm/frame.h>
52#include <mm/page.h>
53#include <mm/tlb.h>
54#include <mm/vm.h>
55
56#include <synch/waitq.h>
57
58#include <arch/arch.h>
59#include <arch.h>
60#include <arch/faddr.h>
61
62#include <typedefs.h>
63
64char *project = "SPARTAN kernel";
65char *release = RELEASE " (" NAME ")";
66#ifdef TAG
67 char *rr_delimiter = "\n";
68 char *revision = TAG;
69#else
70 char *rr_delimiter = "";
71 char *revision = "";
72#endif
73char *copyright = "Copyright (C) 2001-2005 HelenOS project";
74
75config_t config;
76context_t ctx;
77
78/*
79 * These 'hardcoded' variables will be intialised by
80 * the linker or the low level assembler code with
81 * appropriate sizes and addresses.
82 */
83__address hardcoded_load_address = 0;
84size_t hardcoded_ktext_size = 0;
85size_t hardcoded_kdata_size = 0;
86
87__address init_addr = 0;
88size_t init_size = 0;
89
90/*
91 * Size of memory in bytes taken by kernel and heap.
92 */
93static size_t kernel_size;
94
95/*
96 * Size of heap.
97 */
98static size_t heap_size;
99
100
101/*
102 * Extra space between heap and stack
103 * enforced by alignment requirements.
104 */
105static size_t heap_delta;
106
107void main_bsp(void);
108void main_ap(void);
109
110/*
111 * These two functions prevent stack from underflowing during the
112 * kernel boot phase when SP is set to the very top of the reserved
113 * space. The stack could get corrupted by a fooled compiler-generated
114 * pop sequence otherwise.
115 */
116static void main_bsp_separated_stack(void);
117static void main_ap_separated_stack(void);
118
119/** Bootstrap CPU main kernel routine
120 *
121 * Initializes the kernel by bootstrap CPU.
122 *
123 * Assuming interrupts_disable().
124 *
125 */
126void main_bsp(void)
127{
128 config.cpu_count = 1;
129 config.cpu_active = 1;
130 config.base = hardcoded_load_address;
131 config.memory_size = get_memory_size();
132
133 heap_size = CONFIG_HEAP_SIZE + (config.memory_size/FRAME_SIZE)*sizeof(frame_t);
134 kernel_size = ALIGN(hardcoded_ktext_size + hardcoded_kdata_size + heap_size, PAGE_SIZE);
135 heap_delta = kernel_size - (hardcoded_ktext_size + hardcoded_kdata_size + heap_size);
136
137 config.kernel_size = kernel_size + CONFIG_STACK_SIZE;
138
139 context_save(&ctx);
140 early_mapping(config.base + hardcoded_ktext_size + hardcoded_kdata_size, CONFIG_STACK_SIZE + heap_size + heap_delta);
141 context_set(&ctx, FADDR(main_bsp_separated_stack), config.base + kernel_size, CONFIG_STACK_SIZE);
142 context_restore(&ctx);
143 /* not reached */
144}
145
146
147/** Bootstrap CPU main kernel routine stack wrapper
148 *
149 * Second part of main_bsp().
150 *
151 */
152void main_bsp_separated_stack(void)
153{
154 vm_t *m;
155 task_t *k;
156 thread_t *t;
157
158 the_initialize(THE);
159
160 arch_pre_mm_init();
161 early_heap_init(config.base + hardcoded_ktext_size + hardcoded_kdata_size, heap_size + heap_delta);
162 frame_init();
163 page_init();
164 tlb_init();
165 arch_post_mm_init();
166
167 printf("%s, release %s%s%s\n%s\n", project, release, rr_delimiter, revision, copyright);
168 printf("%P: hardcoded_ktext_size=%dK, hardcoded_kdata_size=%dK\n",
169 config.base, hardcoded_ktext_size/1024, hardcoded_kdata_size/1024);
170
171 arch_pre_smp_init();
172 smp_init();
173 arch_post_smp_init();
174 printf("config.memory_size=%dM\n", config.memory_size/(1024*1024));
175 printf("config.cpu_count=%d\n", config.cpu_count);
176
177 cpu_init();
178
179 calibrate_delay_loop();
180
181 timeout_init();
182 scheduler_init();
183 task_init();
184 thread_init();
185
186 /*
187 * Create kernel vm mapping.
188 */
189 m = vm_create(GET_PTL0_ADDRESS());
190 if (!m)
191 panic("can't create kernel vm address space\n");
192
193 /*
194 * Create kernel task.
195 */
196 k = task_create(m);
197 if (!k)
198 panic("can't create kernel task\n");
199
200 /*
201 * Create the first thread.
202 */
203 t = thread_create(kinit, NULL, k, 0);
204 if (!t)
205 panic("can't create kinit thread\n");
206 thread_ready(t);
207 /*
208 * This call to scheduler() will return to kinit,
209 * starting the thread of kernel threads.
210 */
211 scheduler();
212 /* not reached */
213}
214
215
216#ifdef CONFIG_SMP
217/** Application CPUs main kernel routine
218 *
219 * Executed by application processors, temporary stack
220 * is at ctx.sp which was set during BP boot.
221 *
222 * Assuming interrupts_disable()'d.
223 *
224 */
225void main_ap(void)
226{
227 /*
228 * Incrementing the active CPU counter will guarantee that the
229 * pm_init() will not attempt to build GDT and IDT tables again.
230 * Neither frame_init() will do the complete thing. Neither cpu_init()
231 * will do.
232 */
233 config.cpu_active++;
234
235 /*
236 * The THE structure is well defined because ctx.sp is used as stack.
237 */
238 the_initialize(THE);
239
240 arch_pre_mm_init();
241 frame_init();
242 page_init();
243 tlb_init();
244 arch_post_mm_init();
245
246 cpu_init();
247
248 calibrate_delay_loop();
249
250 l_apic_init();
251 l_apic_debug();
252
253 the_copy(THE, (the_t *) CPU->stack);
254
255 /*
256 * If we woke kmp up before we left the kernel stack, we could
257 * collide with another CPU coming up. To prevent this, we
258 * switch to this cpu's private stack prior to waking kmp up.
259 */
260 context_set(&CPU->saved_context, FADDR(main_ap_separated_stack), (__address) CPU->stack, CPU_STACK_SIZE);
261 context_restore(&CPU->saved_context);
262 /* not reached */
263}
264
265
266/** Application CPUs main kernel routine stack wrapper
267 *
268 * Second part of main_ap().
269 *
270 */
271void main_ap_separated_stack(void)
272{
273 /*
274 * Configure timeouts for this cpu.
275 */
276 timeout_init();
277
278 waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);
279 scheduler();
280 /* not reached */
281}
282#endif /* CONFIG_SMP */
Note: See TracBrowser for help on using the repository browser.