source: mainline/generic/src/main/main.c@ 49a39c2

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 49a39c2 was 49a39c2, checked in by Ondrej Palkovsky <ondrap@…>, 20 years ago

Preliminary work on AMD userspace.

  • Property mode set to 100644
File size: 7.3 KB
Line 
1/*
2 * Copyright (C) 2001-2004 Jakub Jermar
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29#include <arch/asm.h>
30#include <context.h>
31#include <print.h>
32#include <panic.h>
33#include <debug.h>
34#include <config.h>
35#include <time/clock.h>
36#include <proc/scheduler.h>
37#include <proc/thread.h>
38#include <proc/task.h>
39#include <main/kinit.h>
40#include <main/version.h>
41#include <console/kconsole.h>
42#include <cpu.h>
43#include <align.h>
44#include <interrupt.h>
45#include <arch/mm/memory_init.h>
46#include <mm/heap.h>
47#include <mm/frame.h>
48#include <mm/page.h>
49#include <genarch/mm/page_pt.h>
50#include <mm/tlb.h>
51#include <mm/as.h>
52#include <mm/slab.h>
53#include <synch/waitq.h>
54#include <arch/arch.h>
55#include <arch.h>
56#include <arch/faddr.h>
57#include <typedefs.h>
58
59#ifdef CONFIG_SMP
60#include <arch/smp/apic.h>
61#include <arch/smp/mps.h>
62#endif /* CONFIG_SMP */
63#include <smp/smp.h>
64
65config_t config; /**< Global configuration structure. */
66
67context_t ctx;
68
69/**
70 * These 'hardcoded' variables will be intialized by
71 * the linker or the low level assembler code with
72 * appropriate sizes and addresses.
73 */
74__address hardcoded_load_address = 0;
75size_t hardcoded_ktext_size = 0;
76size_t hardcoded_kdata_size = 0;
77
78__address init_addr = 0;
79size_t init_size = 0;
80
81void main_bsp(void);
82void main_ap(void);
83
84/*
85 * These two functions prevent stack from underflowing during the
86 * kernel boot phase when SP is set to the very top of the reserved
87 * space. The stack could get corrupted by a fooled compiler-generated
88 * pop sequence otherwise.
89 */
90static void main_bsp_separated_stack(void);
91#ifdef CONFIG_SMP
92static void main_ap_separated_stack(void);
93#endif
94
95/** Bootstrap CPU main kernel routine
96 *
97 * Initializes the kernel by bootstrap CPU.
98 * This function passes control directly to
99 * main_bsp_separated_stack().
100 *
101 * Assuming interrupts_disable().
102 *
103 */
104void main_bsp(void)
105{
106 config.cpu_count = 1;
107 config.cpu_active = 1;
108
109 config.base = hardcoded_load_address;
110 config.memory_size = get_memory_size();
111 config.init_addr = init_addr;
112 config.init_size = init_size;
113
114 if (init_size > 0)
115 config.heap_addr = init_addr + init_size;
116 else
117 config.heap_addr = hardcoded_load_address + hardcoded_ktext_size + hardcoded_kdata_size;
118
119 config.heap_size = CONFIG_HEAP_SIZE + (config.memory_size / FRAME_SIZE) * sizeof(frame_t);
120
121 config.kernel_size = ALIGN_UP(config.heap_addr - hardcoded_load_address + config.heap_size, PAGE_SIZE);
122 config.heap_delta = config.kernel_size - (config.heap_addr - hardcoded_load_address + config.heap_size);
123 config.kernel_size = config.kernel_size + CONFIG_STACK_SIZE;
124
125 context_save(&ctx);
126 context_set(&ctx, FADDR(main_bsp_separated_stack), config.base + config.kernel_size - CONFIG_STACK_SIZE, CONFIG_STACK_SIZE);
127 context_restore(&ctx);
128 /* not reached */
129}
130
131
132/** Bootstrap CPU main kernel routine stack wrapper
133 *
134 * Second part of main_bsp().
135 *
136 */
137void main_bsp_separated_stack(void)
138{
139 task_t *k;
140 thread_t *t;
141
142 the_initialize(THE);
143
144 /*
145 * kconsole data structures must be initialized very early
146 * because other subsystems will register their respective
147 * commands.
148 */
149 kconsole_init();
150
151 /*
152 * Exception handler initialization, before architecture
153 * starts adding its own handlers
154 */
155 exc_init();
156
157 /*
158 * Memory management subsystems initialization.
159 */
160 arch_pre_mm_init();
161 early_heap_init(config.heap_addr, config.heap_size + config.heap_delta);
162 frame_init();
163 slab_cache_init();
164 as_init();
165 page_init();
166 tlb_init();
167 arch_post_mm_init();
168
169 version_print();
170
171 printf("%P: hardcoded_ktext_size=%dK, hardcoded_kdata_size=%dK\n",
172 config.base, hardcoded_ktext_size/1024, hardcoded_kdata_size/1024);
173
174 arch_pre_smp_init();
175 smp_init();
176 /* Slab must be initialized AFTER we know the number of processors */
177 slab_enable_cpucache();
178
179 printf("config.memory_size=%dM\n", config.memory_size/(1024*1024));
180 printf("config.cpu_count=%d\n", config.cpu_count);
181
182 cpu_init();
183
184 calibrate_delay_loop();
185
186 timeout_init();
187 scheduler_init();
188 task_init();
189 thread_init();
190
191 if (config.init_size > 0)
192 printf("config.init_addr=%P, config.init_size=%d\n", config.init_addr, config.init_size);
193
194 /*
195 * Create kernel task.
196 */
197 k = task_create(AS_KERNEL);
198 if (!k)
199 panic("can't create kernel task\n");
200
201 /*
202 * Create the first thread.
203 */
204 t = thread_create(kinit, NULL, k, 0);
205 if (!t)
206 panic("can't create kinit thread\n");
207 thread_ready(t);
208
209 /*
210 * This call to scheduler() will return to kinit,
211 * starting the thread of kernel threads.
212 */
213 scheduler();
214 /* not reached */
215}
216
217
218#ifdef CONFIG_SMP
219/** Application CPUs main kernel routine
220 *
221 * Executed by application processors, temporary stack
222 * is at ctx.sp which was set during BP boot.
223 * This function passes control directly to
224 * main_ap_separated_stack().
225 *
226 * Assuming interrupts_disable()'d.
227 *
228 */
229void main_ap(void)
230{
231 /*
232 * Incrementing the active CPU counter will guarantee that the
233 * pm_init() will not attempt to build GDT and IDT tables again.
234 * Neither frame_init() will do the complete thing. Neither cpu_init()
235 * will do.
236 */
237 config.cpu_active++;
238
239 /*
240 * The THE structure is well defined because ctx.sp is used as stack.
241 */
242 the_initialize(THE);
243
244 arch_pre_mm_init();
245 frame_init();
246 page_init();
247 tlb_init();
248 arch_post_mm_init();
249
250 cpu_init();
251
252 calibrate_delay_loop();
253
254 l_apic_init();
255 l_apic_debug();
256
257 the_copy(THE, (the_t *) CPU->stack);
258
259 /*
260 * If we woke kmp up before we left the kernel stack, we could
261 * collide with another CPU coming up. To prevent this, we
262 * switch to this cpu's private stack prior to waking kmp up.
263 */
264 context_set(&CPU->saved_context, FADDR(main_ap_separated_stack), (__address) CPU->stack, CPU_STACK_SIZE);
265 context_restore(&CPU->saved_context);
266 /* not reached */
267}
268
269
270/** Application CPUs main kernel routine stack wrapper
271 *
272 * Second part of main_ap().
273 *
274 */
275void main_ap_separated_stack(void)
276{
277 /*
278 * Configure timeouts for this cpu.
279 */
280 timeout_init();
281
282 waitq_wakeup(&ap_completion_wq, WAKEUP_FIRST);
283 scheduler();
284 /* not reached */
285}
286#endif /* CONFIG_SMP */
Note: See TracBrowser for help on using the repository browser.