source: mainline/generic/src/ddi/ddi.c@ 6212095

/*
 * Copyright (C) 2006 Jakub Jermar
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
 
/**
 * @file        ddi.c
 * @brief       Device Driver Interface functions.
 *
 * This file contains functions that comprise the Device Driver Interface.
 * These are the functions for mapping physical memory and enabling I/O
 * space to tasks.
 */

#include <ddi/ddi.h>
#include <ddi/ddi_arg.h>
#include <proc/task.h>
#include <security/cap.h>
#include <mm/frame.h>
#include <mm/as.h>
#include <synch/spinlock.h>
#include <syscall/copy.h>
#include <arch.h>
#include <align.h>
#include <errno.h>

/** Map piece of physical memory into virtual address space of specified task.
 *
 * @param id Task ID of the destination task.
 * @param pf Physical frame address of the starting frame.
 * @param vp Virtual page address of the starting page.
 * @param pages Number of pages to map.
 * @param flags Address space area flags for the mapping.
 *
 * @return 0 on success, EPERM if the caller lacks capabilities to use this syscall,
 *         ENOENT if there is no task matching the specified ID and ENOMEM if
 *         there was a problem in creating address space area.
 */
static int ddi_physmem_map(task_id_t id, __address pf, __address vp, count_t pages, int flags)
{
        ipl_t ipl;
        cap_t caps;
        task_t *t;
        mem_backend_data_t backend_data;

        backend_data.base = pf;
        backend_data.frames = pages;
        
        /*
         * Make sure the caller is authorised to make this syscall.
         */
        caps = cap_get(TASK);
        if (!(caps & CAP_MEM_MANAGER))
                return EPERM;
        
        ipl = interrupts_disable();
        spinlock_lock(&tasks_lock);
        
        t = task_find_by_id(id);
        
        if (!t) {
                /*
                 * There is no task with the specified ID.
                 */
                spinlock_unlock(&tasks_lock);
                interrupts_restore(ipl);
                return ENOENT;
        }

        /*
         * TODO: We are currently lacking support for task destroying.
         * Once it is added to the kernel, we must take care to
         * synchronize in a way that prevents race conditions here.
         */
        
        /* Lock the task and release the lock protecting tasks_btree. */
        spinlock_lock(&t->lock);
        spinlock_unlock(&tasks_lock);
        
        if (!as_area_create(t->as, flags, pages * PAGE_SIZE, vp, AS_AREA_ATTR_NONE,
                &phys_backend, &backend_data)) {
                /*
                 * The address space area could not have been created.
                 * We report it using ENOMEM.
                 */
                spinlock_unlock(&t->lock);
                interrupts_restore(ipl);
                return ENOMEM;
        }
        
        /*
         * Mapping is created on-demand during page fault.
         */
        
        spinlock_unlock(&t->lock);
        interrupts_restore(ipl);
        return 0;
}

/** Enable range of I/O space for task.
 *
 * @param id Task ID of the destination task.
 * @param ioaddr Starting I/O address.
 * @param size Size of the enabled I/O space..
 *
 * @return 0 on success, EPERM if the caller lacks capabilities to use this syscall,
 *         ENOENT if there is no task matching the specified ID.
 */
static int ddi_iospace_enable(task_id_t id, __address ioaddr, size_t size)
{
        ipl_t ipl;
        cap_t caps;
        task_t *t;
        int rc;
        
        /*
         * Make sure the caller is authorised to make this syscall.
         */
        caps = cap_get(TASK);
        if (!(caps & CAP_IO_MANAGER))
                return EPERM;
        
        ipl = interrupts_disable();
        spinlock_lock(&tasks_lock);
        
        t = task_find_by_id(id);
        
        if (!t) {
                /*
                 * There is no task with the specified ID.
                 */
                spinlock_unlock(&tasks_lock);
                interrupts_restore(ipl);
                return ENOENT;
        }

        /*
         * TODO: We are currently lacking support for task destroying.
         * Once it is added to the kernel, we must take care to
         * synchronize in a way that prevents race conditions here.
         */
        
        /* Lock the task and release the lock protecting tasks_btree. */
        spinlock_lock(&t->lock);
        spinlock_unlock(&tasks_lock);

        rc = ddi_iospace_enable_arch(t, ioaddr, size);
        
        spinlock_unlock(&t->lock);
        interrupts_restore(ipl);
        return rc;
}

/** Wrapper for SYS_MAP_PHYSMEM syscall.
 *
 * @param User space address of memory DDI argument structure.
 *
 * @return 0 on success, otherwise it returns error code found in errno.h
 */ 
__native sys_physmem_map(ddi_memarg_t *uspace_mem_arg)
{
        ddi_memarg_t arg;
        int rc;
        
        rc = copy_from_uspace(&arg, uspace_mem_arg, sizeof(ddi_memarg_t));
        if (rc != 0)
                return (__native) rc;
                
        return (__native) ddi_physmem_map((task_id_t) arg.task_id, ALIGN_DOWN((__address) arg.phys_base, FRAME_SIZE),
                                          ALIGN_DOWN((__address) arg.virt_base, PAGE_SIZE), (count_t) arg.pages,
                                          (int) arg.flags);
}

/** Wrapper for SYS_ENABLE_IOSPACE syscall.
 *
 * @param User space address of DDI argument structure.
 *
 * @return 0 on success, otherwise it returns error code found in errno.h
 */ 
__native sys_iospace_enable(ddi_ioarg_t *uspace_io_arg)
{
        ddi_ioarg_t arg;
        int rc;
        
        rc = copy_from_uspace(&arg, uspace_io_arg, sizeof(ddi_ioarg_t));
        if (rc != 0)
                return (__native) rc;
                
        return (__native) ddi_iospace_enable((task_id_t) arg.task_id, (__address) arg.ioaddr, (size_t) arg.size);
}

/** Disable or enable preemption.
 *
 * @param enable If non-zero, the preemption counter will be decremented, leading to potential
 *               enabling of preemption. Otherwise the preemption counter will be incremented,
 *               preventing preemption from occurring.
 *
 * @return Zero on success or EPERM if callers capabilities are not sufficient.
 */ 
__native sys_preempt_control(int enable)
{
        if (! cap_get(TASK) & CAP_PREEMPT_CONTROL)
                return EPERM;
        if (enable)
                preemption_enable();
        else
                preemption_disable();
        return 0;
}