source: mainline/boot/arch/arm32/src/mm.c@ c5429fe

/*
 * Copyright (c) 2007 Pavel Jancik, Michal Kebrt
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup boot_arm32
 * @{
 */
/** @file
 * @brief Memory management used while booting the kernel.
 */

#include <stdint.h>
#include <arch/asm.h>
#include <arch/mm.h>
#include <arch/cp15.h>
#include <arch/types.h>

#ifdef PROCESSOR_ARCH_armv7_a
static unsigned log2(unsigned val)
{
        unsigned log = 0;
        while (val >> log++)
                ;
        return log - 2;
}

static void dcache_invalidate_level(unsigned level)
{
        CSSELR_write(level << 1);
        const uint32_t ccsidr = CCSIDR_read();
        const unsigned sets = CCSIDR_SETS(ccsidr);
        const unsigned ways = CCSIDR_WAYS(ccsidr);
        const unsigned line_log = CCSIDR_LINESIZE_LOG(ccsidr);
        const unsigned set_shift = line_log;
        const unsigned way_shift = 32 - log2(ways);

        for (unsigned k = 0; k < ways; ++k)
                for (unsigned j = 0; j < sets; ++j) {
                        const uint32_t val = (level << 1) |
                            (j << set_shift) | (k << way_shift);
                        DCISW_write(val);
                }
}

/** invalidate all dcaches -- armv7 */
static void cache_invalidate(void)
{
        const uint32_t cinfo = CLIDR_read();
        for (unsigned i = 0; i < 7; ++i) {
                switch (CLIDR_CACHE(i, cinfo)) {
                case CLIDR_DCACHE_ONLY:
                case CLIDR_SEP_CACHE:
                case CLIDR_UNI_CACHE:
                        dcache_invalidate_level(i);
                }
        }
        asm volatile ("dsb\n");
        ICIALLU_write(0);
        asm volatile ("isb\n");
}
#endif

/** Disable the MMU */
static void disable_paging(void)
{
        asm volatile (
            "mrc p15, 0, r0, c1, c0, 0\n"
            "bic r0, r0, #1\n"
            "mcr p15, 0, r0, c1, c0, 0\n"
            ::: "r0"
        );
}

/** Check if caching can be enabled for a given memory section.
 *
 * Memory areas used for I/O are excluded from caching.
 * At the moment caching is enabled only on GTA02.
 *
 * @param section       The section number.
 *
 * @return      1 if the given section can be mapped as cacheable, 0 otherwise.
 */
static inline int section_cacheable(pfn_t section)
{
        const unsigned long address = section << PTE_SECTION_SHIFT;
#ifdef MACHINE_gta02
        if (address < GTA02_IOMEM_START || address >= GTA02_IOMEM_END)
                return 1;
#elif defined MACHINE_beagleboardxm
        if (address >= BBXM_RAM_START && address < BBXM_RAM_END)
                return 1;
#elif defined MACHINE_beaglebone
        if (address >= AM335x_RAM_START && address < AM335x_RAM_END)
                return 1;
#elif defined MACHINE_raspberrypi
        if (address < BCM2835_RAM_END)
                return 1;
#endif
        return address * 0;
}

/** Initialize "section" page table entry.
 *
 * Will be readable/writable by kernel with no access from user mode.
 * Will belong to domain 0. No cache or buffering is enabled.
 *
 * @param pte   Section entry to initialize.
 * @param frame First frame in the section (frame number).
 *
 * @note If frame is not 1 MB aligned, first lower 1 MB aligned frame will be
 *       used.
 *
 */
static void init_ptl0_section(pte_level0_section_t *pte,
    pfn_t frame)
{
        pte->descriptor_type = PTE_DESCRIPTOR_SECTION;
        pte->xn = 0;
        pte->domain = 0;
        pte->should_be_zero_1 = 0;
        pte->access_permission_0 = PTE_AP_USER_NO_KERNEL_RW;
#if defined(PROCESSOR_ARCH_armv6) || defined(PROCESSOR_ARCH_armv7_a)
        /*
         * Keeps this setting in sync with memory type attributes in:
         * init_boot_pt (boot/arch/arm32/src/mm.c)
         * set_pt_level1_flags (kernel/arch/arm32/include/arch/mm/page_armv6.h)
         * set_ptl0_addr (kernel/arch/arm32/include/arch/mm/page.h)
         */
        pte->tex = section_cacheable(frame) ? 5 : 0;
        pte->cacheable = section_cacheable(frame) ? 0 : 0;
        pte->bufferable = section_cacheable(frame) ? 1 : 1;
#else
        pte->bufferable = section_cacheable(frame);
        pte->cacheable = section_cacheable(frame);
        pte->tex = 0;
#endif
        pte->access_permission_1 = 0;
        pte->shareable = 0;
        pte->non_global = 0;
        pte->should_be_zero_2 = 0;
        pte->non_secure = 0;
        pte->section_base_addr = frame;
}

/** Initialize page table used while booting the kernel. */
static void init_boot_pt(void)
{
        /*
         * Create 1:1 virtual-physical mapping.
         * Physical memory on BBxM a BBone starts at 2GB
         * boundary, icp has a memory mirror at 2GB.
         * (ARM Integrator Core Module User guide ch. 6.3,  p. 6-7)
         * gta02 somehow works (probably due to limited address size),
         * s3c2442b manual ch. 5, p.5-1:
         * "Address space: 128Mbytes per bank (total 1GB/8 banks)"
         */
        for (pfn_t page = 0; page < PTL0_ENTRIES; ++page)
                init_ptl0_section(&boot_pt[page], page);

        /*
         * Tell MMU page might be cached. Keeps this setting in sync
         * with memory type attributes in:
         * init_ptl0_section (boot/arch/arm32/src/mm.c)
         * set_pt_level1_flags (kernel/arch/arm32/include/arch/mm/page_armv6.h)
         * set_ptl0_addr (kernel/arch/arm32/include/arch/mm/page.h)
         */
        uint32_t val = (uint32_t)boot_pt & TTBR_ADDR_MASK;
#if defined(PROCESSOR_ARCH_armv6) || defined(PROCESSOR_ARCH_armv7_a)
        // FIXME: TTBR_RGN_WBWA_CACHE is unpredictable on ARMv6
        val |= TTBR_RGN_WBWA_CACHE | TTBR_C_FLAG;
#endif
        TTBR0_write(val);
}

static void enable_paging(void)
{
        /*
         * c3   - each two bits controls access to the one of domains (16)
         * 0b01 - behave as a client (user) of a domain
         */
        asm volatile (
            /* Behave as a client of domains */
            "ldr r0, =0x55555555\n"
            "mcr p15, 0, r0, c3, c0, 0\n"

            /* Current settings */
            "mrc p15, 0, r0, c1, c0, 0\n"

            /*
             * Enable ICache, DCache, BPredictors and MMU,
             * we disable caches before jumping to kernel
             * so this is safe for all archs.
             * Enable VMSAv6 the bit (23) is only writable on ARMv6.
             * (and QEMU)
             */
#ifdef PROCESSOR_ARCH_armv6
            "ldr r1, =0x00801805\n"
#else
            "ldr r1, =0x00001805\n"
#endif

            "orr r0, r0, r1\n"

            /*
             * Invalidate the TLB content before turning on the MMU.
             * ARMv7-A Reference manual, B3.10.3
             */
            "mcr p15, 0, r0, c8, c7, 0\n"

            /* Store settings, enable the MMU */
            "mcr p15, 0, r0, c1, c0, 0\n"
            ::: "r0", "r1"
        );
}

/** Start the MMU - initialize page table and enable paging. */
void mmu_start(void)
{
        disable_paging();
#ifdef PROCESSOR_ARCH_armv7_a
        /*
         * Make sure we run in memory code when caches are enabled,
         * make sure we read memory data too. This part is ARMv7 specific as
         * ARMv7 no longer invalidates caches on restart.
         * See chapter B2.2.2 of ARM Architecture Reference Manual p. B2-1263
         */
        cache_invalidate();
#endif
        init_boot_pt();
        enable_paging();
}

/** @}
 */