source: mainline/arch/ia32/src/smp/apic.c@ 77f28f3

lfn serial ticket/834-toolchain-update topic/msim-upgrade topic/simplify-dev-export
Last change on this file since 77f28f3 was 280a27e, checked in by Josef Cejka <malyzelenyhnus@…>, 19 years ago

Printf ported back from uspace to kernel.
Printf calls changed to match new conventions.
  • Property mode set to 100644
File size: 13.2 KB
Line 
1/*
2 * Copyright (C) 2001-2004 Jakub Jermar
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 *
9 * - Redistributions of source code must retain the above copyright
10 * notice, this list of conditions and the following disclaimer.
11 * - Redistributions in binary form must reproduce the above copyright
12 * notice, this list of conditions and the following disclaimer in the
13 * documentation and/or other materials provided with the distribution.
14 * - The name of the author may not be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29#include <arch/types.h>
30#include <arch/smp/apic.h>
31#include <arch/smp/ap.h>
32#include <arch/smp/mps.h>
33#include <arch/boot/boot.h>
34#include <mm/page.h>
35#include <time/delay.h>
36#include <interrupt.h>
37#include <arch/interrupt.h>
38#include <print.h>
39#include <arch/asm.h>
40#include <arch.h>
41
42#ifdef CONFIG_SMP
43
44/*
45 * Advanced Programmable Interrupt Controller for SMP systems.
46 * Tested on:
47 * Bochs 2.0.2 - Bochs 2.2.6 with 2-8 CPUs
48 * Simics 2.0.28 - Simics 2.2.19 2-15 CPUs
49 * VMware Workstation 5.5 with 2 CPUs
50 * QEMU 0.8.0 with 2-15 CPUs
51 * ASUS P/I-P65UP5 + ASUS C-P55T2D REV. 1.41 with 2x 200Mhz Pentium CPUs
52 * ASUS PCH-DL with 2x 3000Mhz Pentium 4 Xeon (HT) CPUs
53 * MSI K7D Master-L with 2x 2100MHz Athlon MP CPUs
54 */
55
56/*
57 * These variables either stay configured as initilalized, or are changed by
58 * the MP configuration code.
59 *
60 * Pay special attention to the volatile keyword. Without it, gcc -O2 would
61 * optimize the code too much and accesses to l_apic and io_apic, that must
62 * always be 32-bit, would use byte oriented instructions.
63 */
64volatile __u32 *l_apic = (__u32 *) 0xfee00000;
65volatile __u32 *io_apic = (__u32 *) 0xfec00000;
66
67__u32 apic_id_mask = 0;
68
69static int apic_poll_errors(void);
70
71#ifdef LAPIC_VERBOSE
72static char *delmod_str[] = {
73 "Fixed",
74 "Lowest Priority",
75 "SMI",
76 "Reserved",
77 "NMI",
78 "INIT",
79 "STARTUP",
80 "ExtInt"
81};
82
83static char *destmod_str[] = {
84 "Physical",
85 "Logical"
86};
87
88static char *trigmod_str[] = {
89 "Edge",
90 "Level"
91};
92
93static char *mask_str[] = {
94 "Unmasked",
95 "Masked"
96};
97
98static char *delivs_str[] = {
99 "Idle",
100 "Send Pending"
101};
102
103static char *tm_mode_str[] = {
104 "One-shot",
105 "Periodic"
106};
107
108static char *intpol_str[] = {
109 "Polarity High",
110 "Polarity Low"
111};
112#endif /* LAPIC_VERBOSE */
113
114
115static void apic_spurious(int n, istate_t *istate);
116static void l_apic_timer_interrupt(int n, istate_t *istate);
117
118/** Initialize APIC on BSP. */
119void apic_init(void)
120{
121 io_apic_id_t idreg;
122 int i;
123
124 exc_register(VECTOR_APIC_SPUR, "apic_spurious", (iroutine) apic_spurious);
125
126 enable_irqs_function = io_apic_enable_irqs;
127 disable_irqs_function = io_apic_disable_irqs;
128 eoi_function = l_apic_eoi;
129
130 /*
131 * Configure interrupt routing.
132 * IRQ 0 remains masked as the time signal is generated by l_apic's themselves.
133 * Other interrupts will be forwarded to the lowest priority CPU.
134 */
135 io_apic_disable_irqs(0xffff);
136 exc_register(VECTOR_CLK, "l_apic_timer", (iroutine) l_apic_timer_interrupt);
137 for (i = 0; i < IRQ_COUNT; i++) {
138 int pin;
139
140 if ((pin = smp_irq_to_pin(i)) != -1) {
141 io_apic_change_ioredtbl(pin, DEST_ALL, IVT_IRQBASE+i, LOPRI);
142 }
143 }
144
145 /*
146 * Ensure that io_apic has unique ID.
147 */
148 idreg.value = io_apic_read(IOAPICID);
149 if ((1<<idreg.apic_id) & apic_id_mask) { /* see if IO APIC ID is used already */
150 for (i = 0; i < APIC_ID_COUNT; i++) {
151 if (!((1<<i) & apic_id_mask)) {
152 idreg.apic_id = i;
153 io_apic_write(IOAPICID, idreg.value);
154 break;
155 }
156 }
157 }
158
159 /*
160 * Configure the BSP's lapic.
161 */
162 l_apic_init();
163
164 l_apic_debug();
165}
166
167/** APIC spurious interrupt handler.
168 *
169 * @param n Interrupt vector.
170 * @param stack Interrupted stack.
171 */
172void apic_spurious(int n, istate_t *istate)
173{
174 printf("cpu%d: APIC spurious interrupt\n", CPU->id);
175}
176
177/** Poll for APIC errors.
178 *
179 * Examine Error Status Register and report all errors found.
180 *
181 * @return 0 on error, 1 on success.
182 */
183int apic_poll_errors(void)
184{
185 esr_t esr;
186
187 esr.value = l_apic[ESR];
188
189 if (esr.send_checksum_error)
190 printf("Send Checksum Error\n");
191 if (esr.receive_checksum_error)
192 printf("Receive Checksum Error\n");
193 if (esr.send_accept_error)
194 printf("Send Accept Error\n");
195 if (esr.receive_accept_error)
196 printf("Receive Accept Error\n");
197 if (esr.send_illegal_vector)
198 printf("Send Illegal Vector\n");
199 if (esr.received_illegal_vector)
200 printf("Received Illegal Vector\n");
201 if (esr.illegal_register_address)
202 printf("Illegal Register Address\n");
203
204 return !esr.err_bitmap;
205}
206
207/** Send all CPUs excluding CPU IPI vector.
208 *
209 * @param vector Interrupt vector to be sent.
210 *
211 * @return 0 on failure, 1 on success.
212 */
213int l_apic_broadcast_custom_ipi(__u8 vector)
214{
215 icr_t icr;
216
217 icr.lo = l_apic[ICRlo];
218 icr.delmod = DELMOD_FIXED;
219 icr.destmod = DESTMOD_LOGIC;
220 icr.level = LEVEL_ASSERT;
221 icr.shorthand = SHORTHAND_ALL_EXCL;
222 icr.trigger_mode = TRIGMOD_LEVEL;
223 icr.vector = vector;
224
225 l_apic[ICRlo] = icr.lo;
226
227 icr.lo = l_apic[ICRlo];
228 if (icr.delivs == DELIVS_PENDING)
229 printf("IPI is pending.\n");
230
231 return apic_poll_errors();
232}
233
234/** Universal Start-up Algorithm for bringing up the AP processors.
235 *
236 * @param apicid APIC ID of the processor to be brought up.
237 *
238 * @return 0 on failure, 1 on success.
239 */
240int l_apic_send_init_ipi(__u8 apicid)
241{
242 icr_t icr;
243 int i;
244
245 /*
246 * Read the ICR register in and zero all non-reserved fields.
247 */
248 icr.lo = l_apic[ICRlo];
249 icr.hi = l_apic[ICRhi];
250
251 icr.delmod = DELMOD_INIT;
252 icr.destmod = DESTMOD_PHYS;
253 icr.level = LEVEL_ASSERT;
254 icr.trigger_mode = TRIGMOD_LEVEL;
255 icr.shorthand = SHORTHAND_NONE;
256 icr.vector = 0;
257 icr.dest = apicid;
258
259 l_apic[ICRhi] = icr.hi;
260 l_apic[ICRlo] = icr.lo;
261
262 /*
263 * According to MP Specification, 20us should be enough to
264 * deliver the IPI.
265 */
266 delay(20);
267
268 if (!apic_poll_errors()) return 0;
269
270 icr.lo = l_apic[ICRlo];
271 if (icr.delivs == DELIVS_PENDING)
272 printf("IPI is pending.\n");
273
274 icr.delmod = DELMOD_INIT;
275 icr.destmod = DESTMOD_PHYS;
276 icr.level = LEVEL_DEASSERT;
277 icr.shorthand = SHORTHAND_NONE;
278 icr.trigger_mode = TRIGMOD_LEVEL;
279 icr.vector = 0;
280 l_apic[ICRlo] = icr.lo;
281
282 /*
283 * Wait 10ms as MP Specification specifies.
284 */
285 delay(10000);
286
287 if (!is_82489DX_apic(l_apic[LAVR])) {
288 /*
289 * If this is not 82489DX-based l_apic we must send two STARTUP IPI's.
290 */
291 for (i = 0; i<2; i++) {
292 icr.lo = l_apic[ICRlo];
293 icr.vector = ((__address) ap_boot) / 4096; /* calculate the reset vector */
294 icr.delmod = DELMOD_STARTUP;
295 icr.destmod = DESTMOD_PHYS;
296 icr.level = LEVEL_ASSERT;
297 icr.shorthand = SHORTHAND_NONE;
298 icr.trigger_mode = TRIGMOD_LEVEL;
299 l_apic[ICRlo] = icr.lo;
300 delay(200);
301 }
302 }
303
304 return apic_poll_errors();
305}
306
307/** Initialize Local APIC. */
308void l_apic_init(void)
309{
310 lvt_error_t error;
311 lvt_lint_t lint;
312 tpr_t tpr;
313 svr_t svr;
314 icr_t icr;
315 tdcr_t tdcr;
316 lvt_tm_t tm;
317 ldr_t ldr;
318 dfr_t dfr;
319 __u32 t1, t2;
320
321 /* Initialize LVT Error register. */
322 error.value = l_apic[LVT_Err];
323 error.masked = true;
324 l_apic[LVT_Err] = error.value;
325
326 /* Initialize LVT LINT0 register. */
327 lint.value = l_apic[LVT_LINT0];
328 lint.masked = true;
329 l_apic[LVT_LINT0] = lint.value;
330
331 /* Initialize LVT LINT1 register. */
332 lint.value = l_apic[LVT_LINT1];
333 lint.masked = true;
334 l_apic[LVT_LINT1] = lint.value;
335
336 /* Task Priority Register initialization. */
337 tpr.value = l_apic[TPR];
338 tpr.pri_sc = 0;
339 tpr.pri = 0;
340 l_apic[TPR] = tpr.value;
341
342 /* Spurious-Interrupt Vector Register initialization. */
343 svr.value = l_apic[SVR];
344 svr.vector = VECTOR_APIC_SPUR;
345 svr.lapic_enabled = true;
346 svr.focus_checking = true;
347 l_apic[SVR] = svr.value;
348
349 if (CPU->arch.family >= 6)
350 enable_l_apic_in_msr();
351
352 /* Interrupt Command Register initialization. */
353 icr.lo = l_apic[ICRlo];
354 icr.delmod = DELMOD_INIT;
355 icr.destmod = DESTMOD_PHYS;
356 icr.level = LEVEL_DEASSERT;
357 icr.shorthand = SHORTHAND_ALL_INCL;
358 icr.trigger_mode = TRIGMOD_LEVEL;
359 l_apic[ICRlo] = icr.lo;
360
361 /* Timer Divide Configuration Register initialization. */
362 tdcr.value = l_apic[TDCR];
363 tdcr.div_value = DIVIDE_1;
364 l_apic[TDCR] = tdcr.value;
365
366 /* Program local timer. */
367 tm.value = l_apic[LVT_Tm];
368 tm.vector = VECTOR_CLK;
369 tm.mode = TIMER_PERIODIC;
370 tm.masked = false;
371 l_apic[LVT_Tm] = tm.value;
372
373 /* Measure and configure the timer to generate timer interrupt each ms. */
374 t1 = l_apic[CCRT];
375 l_apic[ICRT] = 0xffffffff;
376
377 while (l_apic[CCRT] == t1)
378 ;
379
380 t1 = l_apic[CCRT];
381 delay(1000);
382 t2 = l_apic[CCRT];
383
384 l_apic[ICRT] = t1-t2;
385
386 /* Program Logical Destination Register. */
387 ldr.value = l_apic[LDR];
388 if (CPU->id < sizeof(CPU->id)*8) /* size in bits */
389 ldr.id = (1<<CPU->id);
390 l_apic[LDR] = ldr.value;
391
392 /* Program Destination Format Register for Flat mode. */
393 dfr.value = l_apic[DFR];
394 dfr.model = MODEL_FLAT;
395 l_apic[DFR] = dfr.value;
396}
397
398/** Local APIC End of Interrupt. */
399void l_apic_eoi(void)
400{
401 l_apic[EOI] = 0;
402}
403
404/** Dump content of Local APIC registers. */
405void l_apic_debug(void)
406{
407#ifdef LAPIC_VERBOSE
408 lvt_tm_t tm;
409 lvt_lint_t lint;
410 lvt_error_t error;
411
412 printf("LVT on cpu%d, LAPIC ID: %d\n", CPU->id, l_apic_id());
413
414 tm.value = l_apic[LVT_Tm];
415 printf("LVT Tm: vector=%hhd, %s, %s, %s\n", tm.vector, delivs_str[tm.delivs], mask_str[tm.masked], tm_mode_str[tm.mode]);
416 lint.value = l_apic[LVT_LINT0];
417 printf("LVT LINT0: vector=%hhd, %s, %s, %s, irr=%d, %s, %s\n", tm.vector, delmod_str[lint.delmod], delivs_str[lint.delivs], intpol_str[lint.intpol], lint.irr, trigmod_str[lint.trigger_mode], mask_str[lint.masked]);
418 lint.value = l_apic[LVT_LINT1];
419 printf("LVT LINT1: vector=%hhd, %s, %s, %s, irr=%d, %s, %s\n", tm.vector, delmod_str[lint.delmod], delivs_str[lint.delivs], intpol_str[lint.intpol], lint.irr, trigmod_str[lint.trigger_mode], mask_str[lint.masked]);
420 error.value = l_apic[LVT_Err];
421 printf("LVT Err: vector=%hhd, %s, %s\n", error.vector, delivs_str[error.delivs], mask_str[error.masked]);
422#endif
423}
424
425/** Local APIC Timer Interrupt.
426 *
427 * @param n Interrupt vector number.
428 * @param stack Interrupted stack.
429 */
430void l_apic_timer_interrupt(int n, istate_t *istate)
431{
432 l_apic_eoi();
433 clock();
434}
435
436/** Get Local APIC ID.
437 *
438 * @return Local APIC ID.
439 */
440__u8 l_apic_id(void)
441{
442 l_apic_id_t idreg;
443
444 idreg.value = l_apic[L_APIC_ID];
445 return idreg.apic_id;
446}
447
448/** Read from IO APIC register.
449 *
450 * @param address IO APIC register address.
451 *
452 * @return Content of the addressed IO APIC register.
453 */
454__u32 io_apic_read(__u8 address)
455{
456 io_regsel_t regsel;
457
458 regsel.value = io_apic[IOREGSEL];
459 regsel.reg_addr = address;
460 io_apic[IOREGSEL] = regsel.value;
461 return io_apic[IOWIN];
462}
463
464/** Write to IO APIC register.
465 *
466 * @param address IO APIC register address.
467 * @param Content to be written to the addressed IO APIC register.
468 */
469void io_apic_write(__u8 address, __u32 x)
470{
471 io_regsel_t regsel;
472
473 regsel.value = io_apic[IOREGSEL];
474 regsel.reg_addr = address;
475 io_apic[IOREGSEL] = regsel.value;
476 io_apic[IOWIN] = x;
477}
478
479/** Change some attributes of one item in I/O Redirection Table.
480 *
481 * @param pin IO APIC pin number.
482 * @param dest Interrupt destination address.
483 * @param v Interrupt vector to trigger.
484 * @param flags Flags.
485 */
486void io_apic_change_ioredtbl(int pin, int dest, __u8 v, int flags)
487{
488 io_redirection_reg_t reg;
489 int dlvr = DELMOD_FIXED;
490
491 if (flags & LOPRI)
492 dlvr = DELMOD_LOWPRI;
493
494 reg.lo = io_apic_read(IOREDTBL + pin*2);
495 reg.hi = io_apic_read(IOREDTBL + pin*2 + 1);
496
497 reg.dest = dest;
498 reg.destmod = DESTMOD_LOGIC;
499 reg.trigger_mode = TRIGMOD_EDGE;
500 reg.intpol = POLARITY_HIGH;
501 reg.delmod = dlvr;
502 reg.intvec = v;
503
504 io_apic_write(IOREDTBL + pin*2, reg.lo);
505 io_apic_write(IOREDTBL + pin*2 + 1, reg.hi);
506}
507
508/** Mask IRQs in IO APIC.
509 *
510 * @param irqmask Bitmask of IRQs to be masked (0 = do not mask, 1 = mask).
511 */
512void io_apic_disable_irqs(__u16 irqmask)
513{
514 io_redirection_reg_t reg;
515 int i, pin;
516
517 for (i=0;i<16;i++) {
518 if (irqmask & (1<<i)) {
519 /*
520 * Mask the signal input in IO APIC if there is a
521 * mapping for the respective IRQ number.
522 */
523 pin = smp_irq_to_pin(i);
524 if (pin != -1) {
525 reg.lo = io_apic_read(IOREDTBL + pin*2);
526 reg.masked = true;
527 io_apic_write(IOREDTBL + pin*2, reg.lo);
528 }
529
530 }
531 }
532}
533
534/** Unmask IRQs in IO APIC.
535 *
536 * @param irqmask Bitmask of IRQs to be unmasked (0 = do not unmask, 1 = unmask).
537 */
538void io_apic_enable_irqs(__u16 irqmask)
539{
540 int i, pin;
541 io_redirection_reg_t reg;
542
543 for (i=0;i<16;i++) {
544 if (irqmask & (1<<i)) {
545 /*
546 * Unmask the signal input in IO APIC if there is a
547 * mapping for the respective IRQ number.
548 */
549 pin = smp_irq_to_pin(i);
550 if (pin != -1) {
551 reg.lo = io_apic_read(IOREDTBL + pin*2);
552 reg.masked = false;
553 io_apic_write(IOREDTBL + pin*2, reg.lo);
554 }
555
556 }
557 }
558}
559
560#endif /* CONFIG_SMP */
Note: See TracBrowser for help on using the repository browser.