/*
 * Copyright (c) 2006 Ondrej Palkovsky
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * - Redistributions of source code must retain the above copyright
 *   notice, this list of conditions and the following disclaimer.
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 * - The name of the author may not be used to endorse or promote products
 *   derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

/** @addtogroup genericipc
 * @{
 */
/** @file
 */

/* IPC resources management
 *
 * The goal of this source code is to properly manage IPC resources and allow
 * straight and clean clean-up procedure upon task termination.
 *
 * The pattern of usage of the resources is:
 * - allocate empty phone slot, connect | deallocate slot
 * - disconnect connected phone (some messages might be on the fly)
 * - find phone in slot and send a message using phone
 * - answer message to phone
 * - hangup phone (the caller has hung up)
 * - hangup phone (the answerbox is exiting)
 *
 * Locking strategy
 *
 * - To use a phone, disconnect a phone etc., the phone must be first locked and
 *   then checked that it is connected
 * - To connect an allocated phone it need not be locked (assigning pointer is
 *   atomic on all platforms)
 *
 * - To find an empty phone slot, the TASK must be locked
 * - To answer a message, the answerbox must be locked
 * - The locking of phone and answerbox is done at the ipc_ level.
 *   It is perfectly correct to pass unconnected phone to these functions and
 *   proper reply will be generated.
 *
 * Locking order
 *
 * - first phone, then answerbox
 *   + Easy locking on calls
 *   - Very hard traversing list of phones when disconnecting because the phones
 *     may disconnect during traversal of list of connected phones. The only
 *     possibility is try_lock with restart of list traversal.
 *
 * Destroying is less frequent, this approach is taken.
 *
 * Phone call
 *
 * *** Connect_me_to ***
 * The caller sends IPC_M_CONNECT_ME_TO to an answerbox. The server receives
 * 'phoneid' of the connecting phone as an ARG5. If it answers with RETVAL=0,
 * the phonecall is accepted, otherwise it is refused.
 *
 * *** Connect_to_me ***
 * The caller sends IPC_M_CONNECT_TO_ME. 
 * The server receives an automatically opened phoneid. If it accepts
 * (RETVAL=0), it can use the phoneid immediately. 
 * Possible race condition can arise, when the client receives messages from new
 * connection before getting response for connect_to_me message. Userspace
 * should implement handshake protocol that would control it.
 *
 * Phone hangup
 *
 * *** The caller hangs up (sys_ipc_hangup) ***
 * - The phone is disconnected (no more messages can be sent over this phone),
 *   all in-progress messages are correctly handled. The answerbox receives
 *   IPC_M_PHONE_HUNGUP call from the phone that hung up. When all async
 *   calls are answered, the phone is deallocated.
 *
 * *** The answerbox hangs up (ipc_answer(EHANGUP))
 * - The phone is disconnected. EHANGUP response code is sent
 *   to the calling task. All new calls through this phone
 *   get a EHUNGUP error code, the task is expected to
 *   send an sys_ipc_hangup after cleaning up its internal structures.
 *
 * Call forwarding
 *
 * The call can be forwarded, so that the answer to call is passed directly
 * to the original sender. However, this poses special problems regarding 
 * routing of hangup messages.
 *
 * sys_ipc_hangup -> IPC_M_PHONE_HUNGUP
 * - this message CANNOT be forwarded
 *
 * EHANGUP during forward
 * - The *forwarding* phone will be closed, EFORWARD is sent to receiver.
 *
 * EHANGUP, ENOENT during forward
 * - EFORWARD is sent to the receiver, ipc_forward returns error code EFORWARD
 *
 * Cleanup strategy
 *
 * 1) Disconnect all our phones ('ipc_phone_hangup').
 *
 * 2) Disconnect all phones connected to answerbox.
 *
 * 3) Answer all messages in 'calls' and 'dispatched_calls' queues with
 *    appropriate error code (EHANGUP, EFORWARD).
 *
 * 4) Wait for all async answers to arrive and dispose of them.
 *
 */

#include <synch/spinlock.h>
#include <ipc/ipc.h>
#include <arch.h>
#include <proc/task.h>
#include <ipc/ipcrsc.h>
#include <debug.h>

/** Find call_t * in call table according to callid.
 *
 * @todo Some speedup (hash table?)
 *
 * @param callid Userspace hash of the call. Currently it is the call
 *               structure kernel address.
 *
 * @return NULL on not found, otherwise pointer to the call
 *         structure.
 *
 */
call_t *get_call(sysarg_t callid)
{
	call_t *result = NULL;
	
	irq_spinlock_lock(&TASK->answerbox.lock, true);
	
	list_foreach(TASK->answerbox.dispatched_calls, lst) {
		call_t *call = list_get_instance(lst, call_t, link);
		if ((sysarg_t) call == callid) {
			result = call;
			break;
		}
	}
	
	irq_spinlock_unlock(&TASK->answerbox.lock, true);
	return result;
}

/** Allocate new phone slot in the specified task.
 *
 * @param task Task for which to allocate a new phone.
 *
 * @return New phone handle or -1 if the phone handle limit is
 *         exceeded.
 *
 */
int phone_alloc(task_t *task)
{
	irq_spinlock_lock(&task->lock, true);
	
	size_t i;
	for (i = 0; i < IPC_MAX_PHONES; i++) {
		if ((task->phones[i].state == IPC_PHONE_HUNGUP) &&
		    (atomic_get(&task->phones[i].active_calls) == 0))
			task->phones[i].state = IPC_PHONE_FREE;
		
		if (task->phones[i].state == IPC_PHONE_FREE) {
			task->phones[i].state = IPC_PHONE_CONNECTING;
			break;
		}
	}
	
	irq_spinlock_unlock(&task->lock, true);
	
	if (i == IPC_MAX_PHONES)
		return -1;
	
	return i;
}

/** Mark a phone structure free.
 *
 * @param phone Phone structure to be marked free.
 *
 */
static void phone_deallocp(phone_t *phone)
{
	ASSERT(phone->state == IPC_PHONE_CONNECTING);
	
	/* Atomic operation */
	phone->state = IPC_PHONE_FREE;
}

/** Free slot from a disconnected phone.
 *
 * All already sent messages will be correctly processed.
 *
 * @param phoneid Phone handle of the phone to be freed.
 *
 */
void phone_dealloc(int phoneid)
{
	phone_deallocp(&TASK->phones[phoneid]);
}

/** Connect phone to a given answerbox.
 *
 * @param phoneid Phone handle to be connected.
 * @param box     Answerbox to which to connect the phone handle.
 *
 * The procedure _enforces_ that the user first marks the phone
 * busy (e.g. via phone_alloc) and then connects the phone, otherwise
 * race condition may appear.
 *
 */
void phone_connect(int phoneid, answerbox_t *box)
{
	phone_t *phone = &TASK->phones[phoneid];
	
	ASSERT(phone->state == IPC_PHONE_CONNECTING);
	ipc_phone_connect(phone, box);
}

/** @}
 */