Index: kernel/contrib/arch/ia64/vmaxlma.c =================================================================== --- kernel/contrib/arch/ia64/vmaxlma.c (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,75 +1,0 @@ -/* - * Swap VMA and LMA in ELF header. - * - * by Jakub Jermar - * - * GPL'ed, copyleft - */ - -/* - * HP's IA-64 simulator Ski seems to confuse VMA and LMA in the ELF header. - * Instead of using LMA, Ski loads sections at their VMA addresses. - * This short program provides a workaround for this bug by simply - * swapping VMA and LMA in the ELF header of the executable. - * - * Note that after applying this workaround, you will be able to load - * ELF objects with different VMA and LMA in Ski, but the executable - * will become wronged for other potential uses. - */ - -#include -#include -#include -#include -#include -#include -#include - -void syntax(char *prg) -{ - printf("%s ELF-file\n", prg); - exit(1); -} - -void error(char *msg) -{ - printf("Error: %s\n", msg); - exit(2); -} - -#define ELF_VMA (0x50/sizeof(unsigned long long)) -#define ELF_LMA (0x58/sizeof(unsigned long long)) -#define ELF_ENTRY (0x18/sizeof(unsigned long long)) - -#define LENGTH 0x98 - -int main(int argc, char *argv[]) -{ - int fd; - unsigned long long vma, lma,entry; - unsigned long long *elf; - - if (argc != 2) - syntax(argv[0]); - - fd = open(argv[1], O_RDWR); - if (fd == -1) - error("open failed"); - - elf = mmap(NULL, LENGTH, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); - if ((void *) elf == (void *) -1) - error("map failed"); - - lma = elf[ELF_LMA]; - elf[ELF_VMA] = lma; - entry = lma; - elf[ELF_ENTRY] = entry; - - if (munmap(elf, LENGTH) == -1) - error("munmap failed"); - - if (close(fd) == -1) - error("close failed"); - - return 0; -} Index: kernel/contrib/conf/HelenOS.amd64.simics =================================================================== --- kernel/contrib/conf/HelenOS.amd64.simics (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,57 +1,0 @@ -# -# Simics 3.0 AMD64 configuration -# - -$num_cpus = 2 -$cpu_class = "x86-hammer" -$freq_mhz = 50 - -add-directory "%simics%/targets/x86-440bx/images" - -import-isa-components -import-pci-components -import-std-components -import-x86-components - -$system = (create-x86-apic-system memory_megs = 256 - rtc_time = "2006-03-12 10:00:00 UTC" - break_on_reboot = 1 - bios = "rombios-2.65.2.3") - -$count = 0 -$create_command = ("create-" + $cpu_class + "-cpu") -while $count < $num_cpus { - $cpu[$count] = ($create_command cpu_frequency = $freq_mhz) - $system.connect ("cpu" + $count) $cpu[$count] - $count += 1 -} - -$nb = (create-north-bridge-443bx-agp) -$vga = (create-agp-voodoo3) -$nb.connect agp-slot0 $vga - -$sb = (create-south-bridge-piix4) -$sio = (create-std-super-io) -$cdrom = (create-std-ide-cdrom) - -$console = (create-std-graphics-console) -$console.connect mouse $sio mse-console -$console.connect keyboard $sio kbd-console -$console.connect $vga - -$system.connect chipset $nb -$system.connect interrupt $sb -$system.connect reset $sio - -$nb.connect pci-slot7 $sb - -$sb.connect $sio -$sb.connect ide0-slave $cdrom - -instantiate-components - -run-python-file "%simics%/home/scripts/cdrom_bootloader.py" -@install_cdrom_bootloader((conf.cpu0,)) - -new-file-cdrom "image.iso" image -cd0.insert image Index: kernel/contrib/conf/HelenOS.ppc32.simics =================================================================== --- kernel/contrib/conf/HelenOS.ppc32.simics (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,32 +1,0 @@ -# -# Simics 3.0 PPC32 simple configuration -# - -$cpu_class = "ppc750" -$freq_mhz = 50 -$image = "image.boot" -$image_offset = -0x7a000000 - -add-directory "%simics%/targets/ppc64-simple/images" - -import-std-components -import-ppc-simple-components - -$system = (create-ppc-simple cpu_class = $cpu_class - cpu_frequency = $freq_mhz - memory_megs = 256) - -$cpu = ($system.get-component-object "cpu") - -$system.connect uart0 (create-std-text-console) - -instantiate-components - -$start = (load-binary $image $image_offset) -$cpu->msr = ($cpu->msr | (1 << 13) | (1 << 5) | (1 << 4)) -$cpu.set-pc $start - $image_offset - -@itlb = conf.cpu0.itlb -@itlb[0] = [[0, 0, 0, 0, 0], [0, 0, 0, 0, 0]] -@conf.cpu0.itlb = itlb - Index: kernel/contrib/conf/SPMIPS.simics =================================================================== --- kernel/contrib/conf/SPMIPS.simics (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,14 +1,0 @@ -run-python-file ../scripts/extrapath.py - -add-directory ../../import/mips -read-configuration spmips.conf - -set-pc (cpu0.load-binary ../../../SPARTAN/kernel.bin) - -# Setup uart to use 8 bits -@conf.tty0.lcr = 0xf; - -# Set date -rtc0.set-date-time 2001 01 01 01 01 01 -@century = 20 -@ignore=SIM_set_attribute_idx(conf.rtc0, "nvram", 0x32, century) Index: kernel/contrib/conf/bootindy =================================================================== --- kernel/contrib/conf/bootindy (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,2 +1,0 @@ -Without this the indy will not boot -echo 1 > /proc/sys/net/ipv4/ip_no_pmtu_disc Index: kernel/contrib/conf/dot.bochsrc =================================================================== --- kernel/contrib/conf/dot.bochsrc (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,719 +1,0 @@ -# You may now use double quotes around pathnames, in case -# your pathname includes spaces. - -#======================================================================= -# CONFIG_INTERFACE -# -# The configuration interface is a series of menus or dialog boxes that -# allows you to change all the settings that control Bochs's behavior. -# There are two choices of configuration interface: a text mode version -# called "textconfig" and a graphical version called "wx". The text -# mode version uses stdin/stdout and is always compiled in. The graphical -# version is only available when you use "--with-wx" on the configure -# command. If you do not write a config_interface line, Bochs will -# choose a default for you. -# -# NOTE: if you use the "wx" configuration interface, you must also use -# the "wx" display library. -#======================================================================= -config_interface: textconfig -#config_interface: wx - -#======================================================================= -# DISPLAY_LIBRARY -# -# The display library is the code that displays the Bochs VGA screen. Bochs -# has a selection of about 10 different display library implementations for -# different platforms. If you run configure with multiple --with-* options, -# the display_library command lets you choose which one you want to run with. -# If you do not write a display_library line, Bochs will choose a default for -# you. -# -# The choices are: -# x use X windows interface, cross platform -# win32 use native win32 libraries -# carbon use Carbon library (for MacOS X) -# beos use native BeOS libraries -# macintosh use MacOS pre-10 -# amigaos use native AmigaOS libraries -# sdl use SDL library, cross platform -# svga use SVGALIB library for Linux, allows graphics without X11 -# term text only, uses curses/ncurses library, cross platform -# rfb provides an interface to AT&T's VNC viewer, cross platform -# wx use wxWindows library, cross platform -# nogui no display at all -# -# NOTE: if you use the "wx" configuration interface, you must also use -# the "wx" display library. -#======================================================================= -#display_library: amigaos -#display_library: beos -#display_library: carbon -#display_library: macintosh -#display_library: nogui -#display_library: rfb -#display_library: sdl -#display_library: term -#display_library: win32 -#display_library: wx -display_library: x - -cpu: count=8, ips=10000000 - -#======================================================================= -# ROMIMAGE: -# You now need to load a ROM BIOS into F0000-FFFFF. Normally, you can -# use a precompiled BIOS in the bios/ directory of the source tree, -# named BIOS-bochs-latest. -# You can also use the environment variable $BXSHARE to specify the -# location of the BIOS. -#======================================================================= -romimage: file=$BXSHARE/BIOS-bochs-latest, address=0xf0000 -#romimage: file=$BXSHARE/BIOS-bochs-8-processors, address=0xf0000 -#romimage: file=bios/P4SMT, address=0xf0000 - -#======================================================================= -# MEGS -# set this to the default number of Megabytes of memory you want -# to emulate. You may also pass the '-megs xyz' option to bochs -# -# The default is 32MB, most OS's won't need more than that. -#======================================================================= -#megs: 256 -#megs: 128 -#megs: 64 -megs: 32 -#megs: 16 -#megs: 8 - -#======================================================================= -# OPTROMIMAGE[1-4]: -# You may now load up to 4 optional ROM images. Be sure to use a -# read-only area, typically between C8000 and EFFFF. These optional -# ROM images should not overwrite the rombios (located at -# F0000-FFFFF) and the videobios (located at C0000-C7FFF). -# Those ROM images will be initialized by the bios if they contain -# the right signature (0x55AA). -# It can also be a convenient way to upload some arbitary code/data -# in the simulation, that can be retrieved by the boot loader -#======================================================================= -#optromimage1: file=optionalrom.bin, address=0xd0000 -#optromimage2: file=optionalrom.bin, address=0xd1000 -#optromimage3: file=optionalrom.bin, address=0xd2000 -#optromimage4: file=optionalrom.bin, address=0xd3000 - -#======================================================================= -# VGAROMIMAGE -# You now need to load a VGA ROM BIOS into C0000. -#======================================================================= -vgaromimage: $BXSHARE/VGABIOS-lgpl-latest -#vgaromimage: bios/VGABIOS-elpin-2.40 -#vgaromimage: $BXSHARE/VGABIOS-elpin-2.40 - -#======================================================================= -# FLOPPYA: -# Point this to pathname of floppy image file or device -# This should be of a bootable floppy(image/device) if you're -# booting from 'a'. -# -# You can set the initial status of the media to 'ejected' or 'inserted'. -# floppya: 2_88=path, status=ejected (2.88M 3.5" floppy) -# floppya: 1_44=path, status=inserted (1.44M 3.5" floppy) -# floppya: 1_2=path, status=ejected (1.2M 5.25" floppy) -# floppya: 720k=path, status=inserted (720K 3.5" floppy) -# floppya: 360k=path, status=inserted (360K 5.25" floppy) -# floppya: 320k=path, status=inserted (320K 5.25" floppy) -# floppya: 180k=path, status=inserted (180K 5.25" floppy) -# floppya: 160k=path, status=inserted (160K 5.25" floppy) -# -# The path should be the name of a disk image file. On unix, you can use -# a raw device name such as /dev/fd0 on Linux. On WinNT and Win2k, use -# drive letters such as a: or b: as the path. Raw floppy access is not -# supported on Windows 95 and 98. -#======================================================================= -#floppya: 1_44=image.boot, status=inserted -#floppya: 1_44=/dev/fd0, status=inserted - -#======================================================================= -# FLOPPYB: -# See FLOPPYA above for syntax -#======================================================================= -#floppyb: 1_44=b:, status=inserted -#floppyb: 1_44=b.img, status=inserted - -#======================================================================= -# ATA0, ATA1, ATA2, ATA3 -# ATA controller for hard disks and cdroms -# -# ata[0-3]: enabled=[0|1], ioaddr1=addr, ioaddr2=addr, irq=number -# -# These options enables up to 4 ata channels. For each channel -# the two base io addresses and the irq must be specified. -# -# ata0 is enabled by default, with ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14 -# -# Examples: -# ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14 -# ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15 -# ata2: enabled=1, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11 -# ata3: enabled=1, ioaddr1=0x168, ioaddr2=0x360, irq=9 -#======================================================================= -ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14 -ata1: enabled=0, ioaddr1=0x170, ioaddr2=0x370, irq=15 -ata2: enabled=0, ioaddr1=0x1e8, ioaddr2=0x3e0, irq=11 -ata3: enabled=0, ioaddr1=0x168, ioaddr2=0x360, irq=9 - -#======================================================================= -# ATA[0-3]-MASTER, ATA[0-3]-SLAVE -# -# This defines the type and characteristics of all attached ata devices: -# type= type of attached device [disk|cdrom] -# mode= only valid for disks [flat|concat|external|dll|sparse|vmware3] -# mode= only valid for disks [undoable|growing|volatile] -# path= path of the image -# cylinders= only valid for disks -# heads= only valid for disks -# spt= only valid for disks -# status= only valid for cdroms [inserted|ejected] -# biosdetect= type of biosdetection [none|auto], only for disks on ata0 [cmos] -# translation=type of transation of the bios, only for disks [none|lba|large|rechs|auto] -# model= string returned by identify device command -# journal= optional filename of the redolog for undoable and volatile disks -# -# Point this at a hard disk image file, cdrom iso file, or physical cdrom -# device. To create a hard disk image, try running bximage. It will help you -# choose the size and then suggest a line that works with it. -# -# In UNIX it may be possible to use a raw device as a Bochs hard disk, -# but WE DON'T RECOMMEND IT. In Windows there is no easy way. -# -# In windows, the drive letter + colon notation should be used for cdroms. -# Depending on versions of windows and drivers, you may only be able to -# access the "first" cdrom in the system. On MacOSX, use path="drive" -# to access the physical drive. -# -# The path, cylinders, heads, and spt are mandatory for type=disk -# The path is mandatory for type=cdrom -# -# Default values are: -# mode=flat, biosdetect=auto, translation=auto, model="Generic 1234" -# -# The biosdetect option has currently no effect on the bios -# -# Examples: -# ata0-master: type=disk, mode=flat, path=10M.sample, cylinders=306, heads=4, spt=17 -# ata0-slave: type=disk, mode=flat, path=20M.sample, cylinders=615, heads=4, spt=17 -# ata1-master: type=disk, mode=flat, path=30M.sample, cylinders=615, heads=6, spt=17 -# ata1-slave: type=disk, mode=flat, path=46M.sample, cylinders=940, heads=6, spt=17 -# ata2-master: type=disk, mode=flat, path=62M.sample, cylinders=940, heads=8, spt=17 -# ata2-slave: type=disk, mode=flat, path=112M.sample, cylinders=900, heads=15, spt=17 -# ata3-master: type=disk, mode=flat, path=483M.sample, cylinders=1024, heads=15, spt=63 -# ata3-slave: type=cdrom, path=iso.sample, status=inserted -#======================================================================= -ata0-master: type=cdrom, path="image.iso", status=inserted -#ata0-master: type=disk, mode=flat, path="30M.sample", cylinders=615, heads=6, spt=17 -#ata0-slave: type=cdrom, path=D:, status=inserted -#ata0-slave: type=cdrom, path=/dev/cdrom, status=inserted -#ata0-slave: type=cdrom, path="drive", status=inserted -#ata0-slave: type=cdrom, path=/dev/rcd0d, status=inserted - -#======================================================================= -# BOOT: -# This defines your boot drive. -# You can either boot from 'floppy', 'disk' or 'cdrom' -# legacy 'a' and 'c' are also supported -# Examples: -# boot: floppy -# boot: disk -# boot: cdrom -# boot: c -# boot: a -#======================================================================= -boot: cdrom -#boot: disk - -#======================================================================= -# IPS: -# Emulated Instructions Per Second. This is the number of IPS that bochs -# is capable of running on your machine. Read the note in config.h -# on how to find this. Make sure to recompile after. -# -# IPS is used to calibrate many time-dependent events within the bochs -# simulation. For example, changing IPS affects the frequency of VGA -# updates, the duration of time before a key starts to autorepeat, and -# the measurement of BogoMips and other benchmarks. -# -# Examples: -# Machine Mips -# ________________________________________________________________ -# 650Mhz Athlon K-7 with Linux 2.4.4/egcs-2.91.66 2 to 2.5 Mips -# 400Mhz Pentium II with Linux 2.0.36/egcs-1.0.3 1 to 1.8 Mips -# 166Mhz 64bit Sparc with Solaris 2.x approx 0.75 Mips -# 200Mhz Pentium with Linux 2.x approx 0.5 Mips -# -#======================================================================= -ips: 2500000 - -#======================================================================= -# CLOCK: -# This defines the parameters of the clock inside Bochs: -# -# SYNC: -# TO BE COMPLETED (see Greg explaination in bug #536329) -# -# TIME0: -# Specifies the start (boot) time of the virtual machine. Use a time -# value as returned by the time(2) system call. If no time0 value is -# set or if time0 equal to 1 (special case) or if time0 equal 'local', -# the simulation will be started at the current local host time. -# If time0 equal to 2 (special case) or if time0 equal 'utc', -# the simulation will be started at the current utc time. -# -# Syntax: -# clock: sync=[none|slowdown|realtime], time0=[timeValue|local|utc] -# -# Example: -# clock: sync=none, time0=local # Now (localtime) -# clock: sync=slowdown, time0=315529200 # Tue Jan 1 00:00:00 1980 -# clock: sync=none, time0=631148400 # Mon Jan 1 00:00:00 1990 -# clock: sync=realtime, time0=938581955 # Wed Sep 29 07:12:35 1999 -# clock: sync=realtime, time0=946681200 # Sat Jan 1 00:00:00 2000 -# clock: sync=none, time0=1 # Now (localtime) -# clock: sync=none, time0=utc # Now (utc/gmt) -# -# Default value are sync=none, time0=local -#======================================================================= -clock: sync=none, time0=local - - -#======================================================================= -# FLOPPY_BOOTSIG_CHECK: disabled=[0|1] -# Enables or disables the 0xaa55 signature check on boot floppies -# Defaults to disabled=0 -# Examples: -# floppy_bootsig_check: disabled=0 -# floppy_bootsig_check: disabled=1 -#======================================================================= -#floppy_bootsig_check: disabled=1 -floppy_bootsig_check: disabled=1 - -#======================================================================= -# LOG: -# Give the path of the log file you'd like Bochs debug and misc. verbage -# to be written to. If you really don't want it, make it /dev/null. :^( -# -# Examples: -# log: ./bochs.out -# log: /dev/tty -#======================================================================= -#log: /dev/null -log: bochsout.txt - -#======================================================================= -# LOGPREFIX: -# This handles the format of the string prepended to each log line. -# You may use those special tokens : -# %t : 11 decimal digits timer tick -# %i : 8 hexadecimal digits of cpu0 current eip -# %e : 1 character event type ('i'nfo, 'd'ebug, 'p'anic, 'e'rror) -# %d : 5 characters string of the device, between brackets -# -# Default : %t%e%d -# Examples: -# logprefix: %t-%e-@%i-%d -# logprefix: %i%e%d -#======================================================================= -#logprefix: %t%e%d - -#======================================================================= -# LOG CONTROLS -# -# Bochs now has four severity levels for event logging. -# panic: cannot proceed. If you choose to continue after a panic, -# don't be surprised if you get strange behavior or crashes. -# error: something went wrong, but it is probably safe to continue the -# simulation. -# info: interesting or useful messages. -# debug: messages useful only when debugging the code. This may -# spit out thousands per second. -# -# For events of each level, you can choose to crash, report, or ignore. -# TODO: allow choice based on the facility: e.g. crash on panics from -# everything except the cdrom, and only report those. -# -# If you are experiencing many panics, it can be helpful to change -# the panic action to report instead of fatal. However, be aware -# that anything executed after a panic is uncharted territory and can -# cause bochs to become unstable. The panic is a "graceful exit," so -# if you disable it you may get a spectacular disaster instead. -#======================================================================= -panic: action=report -error: action=report -info: action=report -debug: action=ignore -#pass: action=fatal - -#======================================================================= -# DEBUGGER_LOG: -# Give the path of the log file you'd like Bochs to log debugger output. -# If you really don't want it, make it /dev/null or '-'. :^( -# -# Examples: -# debugger_log: ./debugger.out -#======================================================================= -#debugger_log: /dev/null -#debugger_log: debugger.out -debugger_log: - - -#======================================================================= -# COM1: -# This defines a serial port (UART type 16550A). You can specify a device -# to use as com1. This can be a real serial line, or a pty. To use a pty -# (under X/Unix), create two windows (xterms, usually). One of them will -# run bochs, and the other will act as com1. Find out the tty the com1 -# window using the `tty' command, and use that as the `dev' parameter. -# Then do `sleep 1000000' in the com1 window to keep the shell from -# messing with things, and run bochs in the other window. Serial I/O to -# com1 (port 0x3f8) will all go to the other window. -#======================================================================= -#com1: enabled=1, dev=/dev/ttyp9 - - -#======================================================================= -# PARPORT1: -# This defines a parallel (printer) port. When turned on and an output file is -# defined the emulated printer port sends characters printed by the guest OS -# into the output file. On some platforms a device filename can be used to -# send the data to the real parallel port (e.g. "/dev/lp0" on Linux, "lpt1" on -# win32 platforms). -# -# Examples: -# parport1: enabled=1, file="parport.out" -# parport1: enabled=1, file="/dev/lp0" -# parport1: enabled=0 -#======================================================================= -parport1: enabled=1, file="parport.out" - -#======================================================================= -# SB16: -# This defines the SB16 sound emulation. It can have several of the -# following properties. -# All properties are in the format sb16: property=value -# midi: The filename is where the midi data is sent. This can be a -# device or just a file if you want to record the midi data. -# midimode: -# 0=no data -# 1=output to device (system dependent. midi denotes the device driver) -# 2=SMF file output, including headers -# 3=output the midi data stream to the file (no midi headers and no -# delta times, just command and data bytes) -# wave: This is the device/file where wave output is stored -# wavemode: -# 0=no data -# 1=output to device (system dependent. wave denotes the device driver) -# 2=VOC file output, incl. headers -# 3=output the raw wave stream to the file -# log: The file to write the sb16 emulator messages to. -# loglevel: -# 0=no log -# 1=only midi program and bank changes -# 2=severe errors -# 3=all errors -# 4=all errors plus all port accesses -# 5=all errors and port accesses plus a lot of extra info -# dmatimer: -# microseconds per second for a DMA cycle. Make it smaller to fix -# non-continous sound. 750000 is usually a good value. This needs a -# reasonably correct setting for IPS. -# -# For an example look at the next line: -#======================================================================= - -#sb16: midimode=1, midi=/dev/midi00, wavemode=1, wave=/dev/dsp, loglevel=2, log=sb16.log, dmatimer=600000 - -#======================================================================= -# VGA_UPDATE_INTERVAL: -# Video memory is scanned for updates and screen updated every so many -# virtual seconds. The default is 300000, about 3Hz. This is generally -# plenty. Keep in mind that you must tweak the 'ips:' directive -# to be as close to the number of emulated instructions-per-second -# your workstation can do, for this to be accurate. -# -# Examples: -# vga_update_interval: 250000 -#======================================================================= -vga_update_interval: 300000 - -# using for Winstone '98 tests -#vga_update_interval: 100000 - -#======================================================================= -# KEYBOARD_SERIAL_DELAY: -# Approximate time in microseconds that it takes one character to -# be transfered from the keyboard to controller over the serial path. -# Examples: -# keyboard_serial_delay: 200 -#======================================================================= -keyboard_serial_delay: 250 - -#======================================================================= -# KEYBOARD_PASTE_DELAY: -# Approximate time in microseconds between attempts to paste -# characters to the keyboard controller. This leaves time for the -# guest os to deal with the flow of characters. The ideal setting -# depends on how your operating system processes characters. The -# default of 100000 usec (.1 seconds) was chosen because it works -# consistently in Windows. -# -# If your OS is losing characters during a paste, increase the paste -# delay until it stops losing characters. -# -# Examples: -# keyboard_paste_delay: 100000 -#======================================================================= -keyboard_paste_delay: 100000 - -#======================================================================= -# FLOPPY_COMMAND_DELAY: -# Time in microseconds to wait before completing some floppy commands -# such as read/write/seek/etc, which normally have a delay associated. -# I had this hardwired to 50,000 before. -# -# Examples: -# floppy_command_delay: 50000 -#======================================================================= -floppy_command_delay: 500 - -#======================================================================= -# MOUSE: -# This option prevents Bochs from creating mouse "events" unless a mouse -# is enabled. The hardware emulation itself is not disabled by this. -# You can turn the mouse on by setting enabled to 1, or turn it off by -# setting enabled to 0. Unless you have a particular reason for enabling -# the mouse by default, it is recommended that you leave it off. -# You can also toggle the mouse usage at runtime (middle mouse button on -# X11 and SDL, F12 on Win32). -# -# Examples: -# mouse: enabled=1 -# mouse: enabled=0 -#======================================================================= -mouse: enabled=0 - -#======================================================================= -# private_colormap: Request that the GUI create and use it's own -# non-shared colormap. This colormap will be used -# when in the bochs window. If not enabled, a -# shared colormap scheme may be used. Not implemented -# on all GUI's. -# -# Examples: -# private_colormap: enabled=1 -# private_colormap: enabled=0 -#======================================================================= -private_colormap: enabled=0 - -#======================================================================= -# fullscreen: ONLY IMPLEMENTED ON AMIGA -# Request that Bochs occupy the entire screen instead of a -# window. -# -# Examples: -# fullscreen: enabled=0 -# fullscreen: enabled=1 -#======================================================================= -#fullscreen: enabled=0 -#screenmode: name="sample" - -#======================================================================= -# ne2k: NE2000 compatible ethernet adapter -# -# Examples: -# ne2k: ioaddr=IOADDR, irq=IRQ, mac=MACADDR, ethmod=MODULE, ethdev=DEVICE, script=SCRIPT -# -# ioaddr, irq: You probably won't need to change ioaddr and irq, unless there -# are IRQ conflicts. -# -# mac: The MAC address MUST NOT match the address of any machine on the net. -# Also, the first byte must be an even number (bit 0 set means a multicast -# address), and you cannot use ff:ff:ff:ff:ff:ff because that's the broadcast -# address. For the ethertap module, you must use fe:fd:00:00:00:01. There may -# be other restrictions too. To be safe, just use the b0:c4... address. -# -# ethdev: The ethdev value is the name of the network interface on your host -# platform. On UNIX machines, you can get the name by running ifconfig. On -# Windows machines, you must run niclist to get the name of the ethdev. -# Niclist source code is in misc/niclist.c and it is included in Windows -# binary releases. -# -# script: The script value is optionnal, and is the name of a script that -# is executed after bochs initialize the network interface. You can use -# this script to configure this network interface, or enable masquerading. -# This is mainly useful for the tun/tap devices that only exist during -# Bochs execution. The network interface name is supplied to the script -# as first parameter -#======================================================================= -# ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=fbsd, ethdev=en0 #macosx -# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:00, ethmod=fbsd, ethdev=xl0 -# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:00, ethmod=linux, ethdev=eth0 -# ne2k: ioaddr=0x240, irq=9, mac=b0:c4:20:00:00:01, ethmod=win32, ethdev=MYCARD -# ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=tap, ethdev=tap0 -# ne2k: ioaddr=0x240, irq=9, mac=fe:fd:00:00:00:01, ethmod=tuntap, ethdev=tun0, script=./tunconfig - -#======================================================================= -# KEYBOARD_MAPPING: -# This enables a remap of a physical localized keyboard to a -# virtualized us keyboard, as the PC architecture expects. -# If enabled, the keymap file must be specified. -# -# Examples: -# keyboard_mapping: enabled=1, map=gui/keymaps/x11-pc-de.map -#======================================================================= -keyboard_mapping: enabled=0, map= - -#======================================================================= -# KEYBOARD_TYPE: -# Type of keyboard return by a "identify keyboard" command to the -# keyboard controler. It must be one of "xt", "at" or "mf". -# Defaults to "mf". It should be ok for almost everybody. A known -# exception is french macs, that do have a "at"-like keyboard. -# -# Examples: -# keyboard_type: mf -#======================================================================= -#keyboard_type: mf - -#======================================================================= -# USER_SHORTCUT: -# This defines the keyboard shortcut to be sent when you press the "user" -# button in the headerbar. The shortcut string can be a combination of -# these key names: "alt", "bksp", "ctrl", "del", "esc", "f1", "f4", "tab" -# and "win". Up to 3 keys can be pressed at a time. -# -# Example: -# user_shortcut: keys=ctrlaltdel -#======================================================================= -#user_shortcut: keys=ctrlaltdel - -#======================================================================= -# other stuff -#======================================================================= -#magic_break: enabled=1 -#cmosimage: cmos.img -#load32bitOSImage: os=nullkernel, path=../kernel.img, iolog=../vga_io.log -#load32bitOSImage: os=linux, path=../linux.img, iolog=../vga_io.log, initrd=../initrd.img -#i440fxsupport: enabled=1 -usb1: enabled=1, ioaddr=0xFF80, irq=10 -#text_snapshot_check: enable - -#======================================================================= -# for Macintosh, use the style of pathnames in the following -# examples. -# -# vgaromimage: :bios:VGABIOS-elpin-2.40 -# romimage: file=:bios:BIOS-bochs-latest, address=0xf0000 -# floppya: 1_44=[fd:], status=inserted -#======================================================================= - - -#======================================================================= -# -# The following directives are DEPRECATED -# Please convert them to the new syntax or remove them -# -#======================================================================= - -#======================================================================= -# -# The DISKC option is deprecated. Use ATA* options instead. -# -# DISKC: file=, cyl=, heads=, spt= -# Point this at a hard disk image file. To create -# a hard disk image, try running bximage. It will help you choose the -# size and then suggest a diskc line that works with it. -# -# In UNIX it may be possible to use a raw device as a Bochs hard disk, -# but WE DON'T RECOMMEND IT. In Windows there is no easy way. -# -# Examples: -# diskc: file=10M.sample, cyl=306, heads=4, spt=17 -# diskc: file=20M.sample, cyl=615, heads=4, spt=17 -# diskc: file=30M.sample, cyl=615, heads=6, spt=17 -# diskc: file=46M.sample, cyl=940, heads=6, spt=17 -# diskc: file=62M.sample, cyl=940, heads=8, spt=17 -# diskc: file=112M.sample, cyl=900, heads=15, spt=17 -# diskc: file=483M.sample, cyl=1024, heads=15, spt=63 -#======================================================================= -#diskc: file="30M.sample", cyl=615, heads=6, spt=17 - -#======================================================================= -# -# The DISKD option is deprecated. Use ATA* options instead. -# -# DISKD: -# See DISKC above for syntax -# -# NOTE: diskd and cdromd must not be used together! -#======================================================================= -#diskd: file="diskd.img", cyl=615, heads=6, spt=17 - -#======================================================================= -# -# The CDROMD option is deprecated. Use ATA* options instead. -# -# CDROMD: -# -# cdromd: dev=/dev/cdrom, status=inserted -# cdromd: dev=/dev/cdrom, status=ejected -# cdromd: dev=e:, status=ejected -# -# In windows, the drive letter + colon notation should be used for cdroms. -# Depending on versions of windows and drivers, you may only be able to -# access the "first" cdrom in the system. On MacOSX, use path="drive" -# to access the physical drive. -# -# NOTE: diskd and cdromd must not be used together! -#======================================================================= -#cdromd: dev=D:, status=inserted -#cdromd: dev=/dev/cdrom, status=inserted -#cdromd: dev="drive", status=inserted - -#======================================================================= -# -# The TIME0 directive is DEPRECATED. Use the CLOCK directive instead -# -# TIME0: -# Specifies the start (boot) time of the virtual machine. Use a time -# value as returned by the time(2) system call. If no time0 value is -# set or if time0 equal to 1 (special case), the simulation will be -# started at the current time of the host. -# -# Examples: -# time0: 1 # Now -# time0: 315529200 # Tue Jan 1 00:00:00 1980 -# time0: 631148400 # Mon Jan 1 00:00:00 1990 -# time0: 938581955 # Wed Sep 29 07:12:35 1999 -# time0: 946681200 # Sat Jan 1 00:00:00 2000 -#======================================================================= -#time0: 938581955 - -#======================================================================= -# -# The PIT directive is DEPRECATED. Use the CLOCK directive instead -# -# PIT: -# The PIT is the programmable interval timer. It has an option that tries to -# keep the PIT in sync with real time. This feature is still experimental, -# but it may be useful if you want to prevent Bochs from running too fast, for -# example a DOS video game. Be aware that with the realtime pit option, your -# simulation will not be repeatable; this can a problem if you are debugging. -#======================================================================= -#pit: realtime=1 - -#======================================================================= -# NEWHARDDRIVESUPPORT: enabled=[0|1] -# The old harddrive code is not maintened any more. -# Default value is enabled=1 -#======================================================================= -#newharddrivesupport: enabled=1 - Index: kernel/contrib/conf/gxemul.sh =================================================================== --- kernel/contrib/conf/gxemul.sh (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,3 +1,0 @@ -#!/bin/sh - -gxemul $@ -E testmips -X image.boot Index: kernel/contrib/conf/msim.conf =================================================================== --- kernel/contrib/conf/msim.conf (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,11 +1,0 @@ -# -# MSIM configuration script -# - -add dcpu mips1 - -add rwm mainmem 0x0 8M load "/dev/zero" -add rom startmem 0x1fc00000 1024k load "image.boot" - -add dprinter printer 0x10000000 -add dkeyboard keyboard 0x10000000 2 Index: kernel/contrib/conf/pearpc.conf =================================================================== --- kernel/contrib/conf/pearpc.conf (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,7 +1,0 @@ -ppc_start_resolution = "800x600x32" -pci_ide0_master_installed = 0 - -prom_bootmethod = "force" -prom_loadfile = "image.boot" - -key_toggle_mouse_grab = "F11" Index: kernel/contrib/conf/simics.conf =================================================================== --- kernel/contrib/conf/simics.conf (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,25 +1,0 @@ -# Test machine features -# - Standard PC system -# - 256 Mb memory -# - 40 MHz processor(s) -# - AM79C960 NIC (ISA Lance) -# - Voodoo3 PCI graphics device - -@num_processors = 2 -#@num_processors = 1 - -@if not "cpu_class" in dir(): cpu_class = "x86-hammer" -@if not "clock_freq_mhz" in dir(): clock_freq_mhz = 40 -@if not "memory_megs" in dir(): memory_megs = 256 - -@if not "cdrom_image" in dir(): cdrom_image = "image.iso" -@if not "use_voodoo3_pci" in dir(): use_voodoo3_pci = 1 -@if not "use_voodoo3_agp" in dir(): use_voodoo3_agp = 0 - -run-command-file ../x86-test-machine/pc-common.simics -run-python-file ../scripts/cdrom_bootloader.py - -@install_cdrom_bootloader((conf.cpu0,)) -@if cdrom_image != None: - eval_cli_line("new-file-cdrom %s image" % cdrom_image) - eval_cli_line("cd0.insert image") Index: kernel/contrib/conf/ski.conf =================================================================== --- kernel/contrib/conf/ski.conf (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,11 +1,0 @@ -load HelenOS/boot/kernel.bin -romload HelenOS/uspace/ns/ns 0x400000 -romload HelenOS/uspace/init/init 0x800000 -romload HelenOS/uspace/console/console 0xc00000 -romload HelenOS/uspace/fb/fb 0x1000000 -romload HelenOS/uspace/kbd/kbd 0x1400000 -romload HelenOS/uspace/tetris/tetris 0x1800000 -romload HelenOS/uspace/klog/klog 0x1c00000 -romload HelenOS/uspace/ipcc/ipcc 0x2000000 - - Index: kernel/contrib/conf/spmips.conf =================================================================== --- kernel/contrib/conf/spmips.conf (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,263 +1,0 @@ -OBJECT cpu0 TYPE mips-4kc { - freq-mhz: 10 - queue: cpu0 - physical-memory: phys-mem0 -} - -OBJECT phys-mem0 TYPE memory-space { - map: ((0x18000020, pic0, 0, 0x20, 1), - (0x18000021, pic0, 0, 0x21, 1), - (0x180000a0, pic0, 0, 0xa0, 1), - (0x180000a1, pic0, 0, 0xa1, 1), - (0x180004d0, pic0, 0, 0x4d0, 1), - (0x180004d1, pic0, 0, 0x4d1, 1), - (0x18000070, rtc0, 0, 0, 1), - (0x18000071, rtc0, 0, 1, 1), - (0x180003f8, tty0, 0, 0, 1), - (0x180003f9, tty0, 0, 1, 1), - (0x180003fa, tty0, 0, 2, 1), - (0x180003fb, tty0, 0, 3, 1), - (0x180003fc, tty0, 0, 4, 1), - (0x180003fd, tty0, 0, 5, 1), - (0x180003fe, tty0, 0, 6, 1), - (0x180003ff, tty0, 0, 7, 1), - (0x1c000000, hfs0, 0, 0, 16), - (0x01000000, initmem0, 0, 0, 0x100000)) -} - -OBJECT cbus-space TYPE memory-space { - map: ((0x1f000000, malta0, 0, 0, 0xc00000), - (0x1fc00000, rom0, 0, 0, 0x400000)) -} - -OBJECT memory0 TYPE ram { - image: memory0-image -} -OBJECT memory0-image TYPE image { - queue: cpu0 - size: 0x08000000 -} - -OBJECT initmem0 TYPE ram { - image: initmem0-image -} -OBJECT initmem0-image TYPE image { - queue: cpu0 - size: 0x100000 - files: (("../../../uspace/init/init", "ro", 0,0)) -} - -OBJECT rom0 TYPE rom { - image: rom0-image -} -OBJECT rom0-image TYPE image { - queue: cpu0 - size: 0x00400000 -} - -OBJECT tty0 TYPE NS16550 { - irq-dev: pic0 - irq-level: 4 - queue: cpu0 - console: con0 - recorder: rec0 -} - -OBJECT pic0 TYPE i8259x2 { - queue: cpu0 - irq-dev: gt64120-0 - # It seems like Linux expects the master 8259 to have VBA 0. - # Maybe that would be set up by YAMON? - vba: (0, 1) -} - -OBJECT con0 TYPE xterm-console { - title: "mips32-test-machine" - bg-color: "black" - fg-color: "green" - queue: cpu0 - device: tty0 - output-timeout: 120 -} - -OBJECT rtc0 TYPE DS12887 { - irq-dev: pic0 - irq-level: 8 - queue: cpu0 -} - -OBJECT malta0 TYPE malta { - console: display0 -} - -OBJECT display0 TYPE xterm-console { - title: "MALTA Display" - bg-color: "black" - fg-color: "red" - width: 8 - height: 1 - scrollbar: 0 - x11-font: "-*-*-*-r-*-*-*-240-*-*-m-*-*-*" - win32-font: "Lucida Console:Bold:48" - queue: cpu0 - output-timeout: 120 -} - -# PCI buses -OBJECT pci-bus0 TYPE pci-bus { - queue: cpu0 - bridge: gt64120-0-pci-0-0 - interrupt: gt64120-0-pci-0-0 - conf-space: pci-bus0-conf-space - memory-space: pci-bus0-memory-space - io-space: pci-bus0-io-space - - pci-devices: ((0, 0, gt64120-0-pci-0-0), - (0, 1, gt64120-0-pci-0-1)) -} - -OBJECT pci-bus0-conf-space TYPE memory-space { - queue: cpu0 -} - -OBJECT pci-bus1-conf-space TYPE memory-space { - queue: cpu0 -} - -OBJECT pci-bus0-memory-space TYPE memory-space { - queue: cpu0 -} - -OBJECT pci-bus1 TYPE pci-bus { - queue: cpu0 - bridge: gt64120-0-pci-1-0 - interrupt: gt64120-0-pci-1-0 - conf-space: pci-bus1-conf-space - memory-space: pci-bus1-memory-space - io-space: pci-bus1-io-space - - pci-devices: ((0, 0, gt64120-0-pci-1-0), - (0, 1, gt64120-0-pci-1-1)) -} - -OBJECT pci-bus1-memory-space TYPE memory-space { - queue: cpu0 -} - -OBJECT pci-bus0-io-space TYPE memory-space { - queue: cpu0 -} - -OBJECT pci-bus1-io-space TYPE memory-space { - queue: cpu0 -} - -# GT64120 chipset -OBJECT gt64120-0 TYPE GT64120 { - queue: cpu0 - cpu-mem: phys-mem0 - - pci-0-0: gt64120-0-pci-0-0 - pci-0-1: gt64120-0-pci-0-1 - pci-1-0: gt64120-0-pci-1-0 - pci-1-1: gt64120-0-pci-1-1 - - scs0: memory0 - cs3: cbus-space - bootcs: cbus-space - pci-0-conf: pci-bus0-conf-space - pci-0-io: pci-bus0-io-space - pci-0-memory: pci-bus0-memory-space - pci-1-conf: pci-bus1-conf-space - pci-1-io: pci-bus1-io-space - pci-1-memory: pci-bus1-memory-space - - irq-dev: cpu0 - irq-level: 2 - - # Little endian - cpu_interface_configuration: 0x00041000 - - # Map 128MB RAM. - scs10-high-decode-address: 0x40 - scs0-low-decode-address: 0x0 - scs0-high-decode-address: 0x7f - - # Map the internal registers at 0x1be00000. - internal-space-decode: 0xdf - - # Disable host-PCI mappings - pci-0-io-high-decode-address: 0 - pci-0-io-low-decode-address: 1 - pci-0-io-remap: 1 - pci-0-memory-0-high-decode-address: 0 - pci-0-memory-0-low-decode-address: 1 - pci-0-memory-0-remap: 1 - pci-0-memory-1-high-decode-address: 0 - pci-0-memory-1-low-decode-address: 1 - pci-0-memory-1-remap: 1 - pci-1-io-high-decode-address: 0 - pci-1-io-low-decode-address: 1 - pci-1-io-remap: 1 - pci-1-memory-0-high-decode-address: 0 - pci-1-memory-0-low-decode-address: 1 - pci-1-memory-0-remap: 1 - pci-1-memory-1-high-decode-address: 0 - pci-1-memory-1-low-decode-address: 1 - pci-1-memory-1-remap: 1 - - # Disable PCI-host mappings - pci-0-base-address-registers-enable: 0x1ff - pci-1-base-address-registers-enable: 0x1ff -} - -OBJECT gt64120-0-pci-0-0 TYPE GT64120-pci { - queue: cpu0 - - gt64120: gt64120-0 - bridge-num: 0 - function-num: 0 - - pci-bus: pci-bus0 -} - -OBJECT gt64120-0-pci-0-1 TYPE GT64120-pci { - queue: cpu0 - - gt64120: gt64120-0 - bridge-num: 0 - function-num: 1 - - pci-bus: pci-bus0 -} - -OBJECT gt64120-0-pci-1-0 TYPE GT64120-pci { - queue: cpu0 - - gt64120: gt64120-0 - bridge-num: 1 - function-num: 0 - - pci-bus: pci-bus1 -} - -OBJECT gt64120-0-pci-1-1 TYPE GT64120-pci { - queue: cpu0 - - gt64120: gt64120-0 - bridge-num: 1 - function-num: 1 - - pci-bus: pci-bus1 -} - -# Various -OBJECT rec0 TYPE recorder { -} - -OBJECT hfs0 TYPE hostfs { -} - -OBJECT sim TYPE sim { - handle-outside-memory: 1 -} Index: kernel/contrib/conf/vmware.conf =================================================================== --- kernel/contrib/conf/vmware.conf (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,15 +1,0 @@ -#!/opt/vmware/bin/vmware -config.version = "8" -virtualHW.version = "4" -scsi0.present = "FALSE" -memsize = "96" -ide0:0.present = "FALSE" -ide1:0.present = "FALSE" -floppy0.startConnected = "TRUE" -floppy0.fileType = "file" -floppy0.fileName = "image.bin" -sound.present = "FALSE" -displayName = "HelenOS" -guestOS = "other" -nvram = "HelenOS.nvram" -isolation.tools.hgfs.disable = "TRUE" Index: kernel/contrib/toolchain/toolchain.amd64.sh =================================================================== --- kernel/contrib/toolchain/toolchain.amd64.sh (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,84 +1,0 @@ -#!/bin/bash - -# Cross-Compiler Toolchain for ${PLATFORM} -# by Martin Decky -# -# GPL'ed, copyleft -# - - -check_error() { - if [ "$1" -ne "0" ]; then - echo - echo "Script failed: $2" - exit - fi -} - -BINUTILS_VERSION="2.16.1" -GCC_VERSION="4.1.1" - -BINUTILS="binutils-${BINUTILS_VERSION}.tar.gz" -GCC="gcc-core-${GCC_VERSION}.tar.bz2" - -BINUTILS_SOURCE="ftp://ftp.gnu.org/gnu/binutils/" -GCC_SOURCE="ftp://ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}/" - -PLATFORM="amd64" -WORKDIR=`pwd` -TARGET="${PLATFORM}-linux-gnu" -HOST="i686-pc-linux-gnu" -PREFIX="/usr/local/${PLATFORM}" -BINUTILSDIR="${WORKDIR}/binutils-${BINUTILS_VERSION}" -GCCDIR="${WORKDIR}/gcc-${GCC_VERSION}" -OBJDIR="${WORKDIR}/gcc-obj" - -echo ">>> Downloading tarballs" - -if [ ! -f "${BINUTILS}" ]; then - wget -c "${BINUTILS_SOURCE}${BINUTILS}" - check_error $? "Error downloading binutils." -fi -if [ ! -f "${GCC}" ]; then - wget -c "${GCC_SOURCE}${GCC}" - check_error $? "Error downloading GCC." -fi - -echo ">>> Creating destionation directory" -if [ ! -d "${PREFIX}" ]; then - mkdir -p "${PREFIX}" - test -d "${PREFIX}" - check_error $? "Unable to create ${PREFIX}." -fi - -echo ">>> Creating GCC work directory" -if [ ! -d "${OBJDIR}" ]; then - mkdir -p "${OBJDIR}" - test -d "${OBJDIR}" - check_error $? "Unable to create ${OBJDIR}." -fi - -echo ">>> Unpacking tarballs" -tar -xvzf "${BINUTILS}" -check_error $? "Error unpacking binutils." -tar -xvjf "${GCC}" -check_error $? "Error unpacking GCC." - -echo ">>> Compiling and installing binutils" -cd "${BINUTILSDIR}" -check_error $? "Change directory failed." -./configure "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" "--disable-nls" -check_error $? "Error configuring binutils." -make all install -check_error $? "Error compiling/installing binutils." - -echo ">>> Compiling and installing GCC" -cd "${OBJDIR}" -check_error $? "Change directory failed." -"${GCCDIR}/configure" "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" --with-gnu-as --with-gnu-ld --disable-nls --disable-threads --enable-languages=c --disable-multilib --disable-libgcj --without-headers --disable-shared -check_error $? "Error configuring GCC." -PATH="${PATH}:${PREFIX}/bin" make all-gcc install-gcc -check_error $? "Error compiling/installing GCC." - -echo -echo ">>> Cross-compiler for ${TARGET} installed." Index: kernel/contrib/toolchain/toolchain.ia32.sh =================================================================== --- kernel/contrib/toolchain/toolchain.ia32.sh (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,84 +1,0 @@ -#!/bin/bash - -# Cross-Compiler Toolchain for ${PLATFORM} -# by Martin Decky -# -# GPL'ed, copyleft -# - - -check_error() { - if [ "$1" -ne "0" ]; then - echo - echo "Script failed: $2" - exit - fi -} - -BINUTILS_VERSION="2.16.1" -GCC_VERSION="4.1.1" - -BINUTILS="binutils-${BINUTILS_VERSION}.tar.gz" -GCC="gcc-core-${GCC_VERSION}.tar.bz2" - -BINUTILS_SOURCE="ftp://ftp.gnu.org/gnu/binutils/" -GCC_SOURCE="ftp://ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}/" - -PLATFORM="i686" -WORKDIR=`pwd` -TARGET="${PLATFORM}-pc-linux-gnu" -HOST="i686-pc-linux-gnu" -PREFIX="/usr/local/${PLATFORM}" -BINUTILSDIR="${WORKDIR}/binutils-${BINUTILS_VERSION}" -GCCDIR="${WORKDIR}/gcc-${GCC_VERSION}" -OBJDIR="${WORKDIR}/gcc-obj" - -echo ">>> Downloading tarballs" - -if [ ! -f "${BINUTILS}" ]; then - wget -c "${BINUTILS_SOURCE}${BINUTILS}" - check_error $? "Error downloading binutils." -fi -if [ ! -f "${GCC}" ]; then - wget -c "${GCC_SOURCE}${GCC}" - check_error $? "Error downloading GCC." -fi - -echo ">>> Creating destionation directory" -if [ ! -d "${PREFIX}" ]; then - mkdir -p "${PREFIX}" - test -d "${PREFIX}" - check_error $? "Unable to create ${PREFIX}." -fi - -echo ">>> Creating GCC work directory" -if [ ! -d "${OBJDIR}" ]; then - mkdir -p "${OBJDIR}" - test -d "${OBJDIR}" - check_error $? "Unable to create ${OBJDIR}." -fi - -echo ">>> Unpacking tarballs" -tar -xvzf "${BINUTILS}" -check_error $? "Error unpacking binutils." -tar -xvjf "${GCC}" -check_error $? "Error unpacking GCC." - -echo ">>> Compiling and installing binutils" -cd "${BINUTILSDIR}" -check_error $? "Change directory failed." -./configure "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" "--disable-nls" -check_error $? "Error configuring binutils." -make all install -check_error $? "Error compiling/installing binutils." - -echo ">>> Compiling and installing GCC" -cd "${OBJDIR}" -check_error $? "Change directory failed." -"${GCCDIR}/configure" "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" --with-gnu-as --with-gnu-ld --disable-nls --disable-threads --enable-languages=c --disable-multilib --disable-libgcj --without-headers --disable-shared -check_error $? "Error configuring GCC." -PATH="${PATH}:${PREFIX}/bin" make all-gcc install-gcc -check_error $? "Error compiling/installing GCC." - -echo -echo ">>> Cross-compiler for ${TARGET} installed." Index: kernel/contrib/toolchain/toolchain.ia64.sh =================================================================== --- kernel/contrib/toolchain/toolchain.ia64.sh (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,93 +1,0 @@ -#!/bin/bash - -# Cross-Compiler Toolchain for ${PLATFORM} -# by Martin Decky -# -# GPL'ed, copyleft -# - - -check_error() { - if [ "$1" -ne "0" ]; then - echo - echo "Script failed: $2" - exit - fi -} - -BINUTILS_VERSION="2.16.1" -GCC_VERSION="4.1.1" - -INCLUDES="ia64-pc-gnu-linux_includes.tar.bz2" -BINUTILS="binutils-${BINUTILS_VERSION}.tar.gz" -GCC="gcc-core-${GCC_VERSION}.tar.bz2" - -INCLUDES_SOURCE="http://download.decky.cz/" -BINUTILS_SOURCE="ftp://ftp.gnu.org/gnu/binutils/" -GCC_SOURCE="ftp://ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}/" - -PLATFORM="ia64" -WORKDIR=`pwd` -TARGET="${PLATFORM}-pc-linux-gnu" -HOST="i686-pc-linux-gnu" -PREFIX="/usr/local/${PLATFORM}" -INCLUDESDIR="${WORKDIR}/include" -BINUTILSDIR="${WORKDIR}/binutils-${BINUTILS_VERSION}" -GCCDIR="${WORKDIR}/gcc-${GCC_VERSION}" -OBJDIR="${WORKDIR}/gcc-obj" - -echo ">>> Downloading tarballs" - -if [ ! -f "${INCLUDES}" ]; then - wget -c "${INCLUDES_SOURCE}${INCLUDES}" - check_error $? "Error downloading includes." -fi -if [ ! -f "${BINUTILS}" ]; then - wget -c "${BINUTILS_SOURCE}${BINUTILS}" - check_error $? "Error downloading binutils." -fi -if [ ! -f "${GCC}" ]; then - wget -c "${GCC_SOURCE}${GCC}" - check_error $? "Error downloading GCC." -fi - -echo ">>> Creating destionation directory" -if [ ! -d "${PREFIX}" ]; then - mkdir -p "${PREFIX}" - test -d "${PREFIX}" - check_error $? "Unable to create ${PREFIX}." -fi - -echo ">>> Creating GCC work directory" -if [ ! -d "${OBJDIR}" ]; then - mkdir -p "${OBJDIR}" - test -d "${OBJDIR}" - check_error $? "Unable to create ${OBJDIR}." -fi - -echo ">>> Unpacking tarballs" -tar -xvjf "${INCLUDES}" -check_error $? "Error unpacking includes." -tar -xvzf "${BINUTILS}" -check_error $? "Error unpacking binutils." -tar -xvjf "${GCC}" -check_error $? "Error unpacking GCC." - -echo ">>> Compiling and installing binutils" -cd "${BINUTILSDIR}" -check_error $? "Change directory failed." -./configure "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" "--disable-nls" -check_error $? "Error configuring binutils." -make all install -check_error $? "Error compiling/installing binutils." - -echo ">>> Compiling and installing GCC" -cd "${OBJDIR}" -check_error $? "Change directory failed." -"${GCCDIR}/configure" "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" --with-gnu-as --with-gnu-ld --disable-nls --disable-threads --enable-languages=c --disable-multilib --disable-libgcj "--with-headers=${INCLUDESDIR}" --disable-shared -check_error $? "Error configuring GCC." -PATH="${PATH}:${PREFIX}/bin" make all-gcc install-gcc -check_error $? "Error compiling/installing GCC." - -echo -echo ">>> Cross-compiler for ${TARGET} installed." Index: kernel/contrib/toolchain/toolchain.mipseb32.sh =================================================================== --- kernel/contrib/toolchain/toolchain.mipseb32.sh (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,84 +1,0 @@ -#!/bin/bash - -# Cross-Compiler Toolchain for ${PLATFORM} -# by Martin Decky -# -# GPL'ed, copyleft -# - - -check_error() { - if [ "$1" -ne "0" ]; then - echo - echo "Script failed: $2" - exit - fi -} - -BINUTILS_VERSION="2.16.1" -GCC_VERSION="4.1.1" - -BINUTILS="binutils-${BINUTILS_VERSION}.tar.gz" -GCC="gcc-core-${GCC_VERSION}.tar.bz2" - -BINUTILS_SOURCE="ftp://ftp.gnu.org/gnu/binutils/" -GCC_SOURCE="ftp://ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}/" - -PLATFORM="mips" -WORKDIR=`pwd` -TARGET="${PLATFORM}-sgi-irix5" -HOST="i686-pc-linux-gnu" -PREFIX="/usr/local/${PLATFORM}" -BINUTILSDIR="${WORKDIR}/binutils-${BINUTILS_VERSION}" -GCCDIR="${WORKDIR}/gcc-${GCC_VERSION}" -OBJDIR="${WORKDIR}/gcc-obj" - -echo ">>> Downloading tarballs" - -if [ ! -f "${BINUTILS}" ]; then - wget -c "${BINUTILS_SOURCE}${BINUTILS}" - check_error $? "Error downloading binutils." -fi -if [ ! -f "${GCC}" ]; then - wget -c "${GCC_SOURCE}${GCC}" - check_error $? "Error downloading GCC." -fi - -echo ">>> Creating destionation directory" -if [ ! -d "${PREFIX}" ]; then - mkdir -p "${PREFIX}" - test -d "${PREFIX}" - check_error $? "Unable to create ${PREFIX}." -fi - -echo ">>> Creating GCC work directory" -if [ ! -d "${OBJDIR}" ]; then - mkdir -p "${OBJDIR}" - test -d "${OBJDIR}" - check_error $? "Unable to create ${OBJDIR}." -fi - -echo ">>> Unpacking tarballs" -tar -xvzf "${BINUTILS}" -check_error $? "Error unpacking binutils." -tar -xvjf "${GCC}" -check_error $? "Error unpacking GCC." - -echo ">>> Compiling and installing binutils" -cd "${BINUTILSDIR}" -check_error $? "Change directory failed." -./configure "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" "--disable-nls" -check_error $? "Error configuring binutils." -make all install -check_error $? "Error compiling/installing binutils." - -echo ">>> Compiling and installing GCC" -cd "${OBJDIR}" -check_error $? "Change directory failed." -"${GCCDIR}/configure" "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" --with-gnu-as --with-gnu-ld --disable-nls --disable-threads --enable-languages=c --disable-multilib --disable-libgcj --without-headers --disable-shared -check_error $? "Error configuring GCC." -PATH="${PATH}:${PREFIX}/bin" make all-gcc install-gcc -check_error $? "Error compiling/installing GCC." - -echo -echo ">>> Cross-compiler for ${TARGET} installed." Index: kernel/contrib/toolchain/toolchain.mipsel32.sh =================================================================== --- kernel/contrib/toolchain/toolchain.mipsel32.sh (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,84 +1,0 @@ -#!/bin/bash - -# Cross-Compiler Toolchain for ${PLATFORM} -# by Martin Decky -# -# GPL'ed, copyleft -# - - -check_error() { - if [ "$1" -ne "0" ]; then - echo - echo "Script failed: $2" - exit - fi -} - -BINUTILS_VERSION="2.16.1" -GCC_VERSION="4.1.1" - -BINUTILS="binutils-${BINUTILS_VERSION}.tar.gz" -GCC="gcc-core-${GCC_VERSION}.tar.bz2" - -BINUTILS_SOURCE="ftp://ftp.gnu.org/gnu/binutils/" -GCC_SOURCE="ftp://ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}/" - -PLATFORM="mipsel" -WORKDIR=`pwd` -TARGET="${PLATFORM}-linux-gnu" -HOST="i686-pc-linux-gnu" -PREFIX="/usr/local/${PLATFORM}" -BINUTILSDIR="${WORKDIR}/binutils-${BINUTILS_VERSION}" -GCCDIR="${WORKDIR}/gcc-${GCC_VERSION}" -OBJDIR="${WORKDIR}/gcc-obj" - -echo ">>> Downloading tarballs" - -if [ ! -f "${BINUTILS}" ]; then - wget -c "${BINUTILS_SOURCE}${BINUTILS}" - check_error $? "Error downloading binutils." -fi -if [ ! -f "${GCC}" ]; then - wget -c "${GCC_SOURCE}${GCC}" - check_error $? "Error downloading GCC." -fi - -echo ">>> Creating destionation directory" -if [ ! -d "${PREFIX}" ]; then - mkdir -p "${PREFIX}" - test -d "${PREFIX}" - check_error $? "Unable to create ${PREFIX}." -fi - -echo ">>> Creating GCC work directory" -if [ ! -d "${OBJDIR}" ]; then - mkdir -p "${OBJDIR}" - test -d "${OBJDIR}" - check_error $? "Unable to create ${OBJDIR}." -fi - -echo ">>> Unpacking tarballs" -tar -xvzf "${BINUTILS}" -check_error $? "Error unpacking binutils." -tar -xvjf "${GCC}" -check_error $? "Error unpacking GCC." - -echo ">>> Compiling and installing binutils" -cd "${BINUTILSDIR}" -check_error $? "Change directory failed." -./configure "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" "--disable-nls" -check_error $? "Error configuring binutils." -make all install -check_error $? "Error compiling/installing binutils." - -echo ">>> Compiling and installing GCC" -cd "${OBJDIR}" -check_error $? "Change directory failed." -"${GCCDIR}/configure" "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" --with-gnu-as --with-gnu-ld --disable-nls --disable-threads --enable-languages=c --disable-multilib --disable-libgcj --without-headers --disable-shared -check_error $? "Error configuring GCC." -PATH="${PATH}:${PREFIX}/bin" make all-gcc install-gcc -check_error $? "Error compiling/installing GCC." - -echo -echo ">>> Cross-compiler for ${TARGET} installed." Index: kernel/contrib/toolchain/toolchain.ppc32.sh =================================================================== --- kernel/contrib/toolchain/toolchain.ppc32.sh (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,84 +1,0 @@ -#!/bin/bash - -# Cross-Compiler Toolchain for ${PLATFORM} -# by Martin Decky -# -# GPL'ed, copyleft -# - - -check_error() { - if [ "$1" -ne "0" ]; then - echo - echo "Script failed: $2" - exit - fi -} - -BINUTILS_VERSION="2.16.1" -GCC_VERSION="4.1.1" - -BINUTILS="binutils-${BINUTILS_VERSION}.tar.gz" -GCC="gcc-core-${GCC_VERSION}.tar.bz2" - -BINUTILS_SOURCE="ftp://ftp.gnu.org/gnu/binutils/" -GCC_SOURCE="ftp://ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}/" - -PLATFORM="ppc" -WORKDIR=`pwd` -TARGET="${PLATFORM}-linux-gnu" -HOST="i686-pc-linux-gnu" -PREFIX="/usr/local/${PLATFORM}" -BINUTILSDIR="${WORKDIR}/binutils-${BINUTILS_VERSION}" -GCCDIR="${WORKDIR}/gcc-${GCC_VERSION}" -OBJDIR="${WORKDIR}/gcc-obj" - -echo ">>> Downloading tarballs" - -if [ ! -f "${BINUTILS}" ]; then - wget -c "${BINUTILS_SOURCE}${BINUTILS}" - check_error $? "Error downloading binutils." -fi -if [ ! -f "${GCC}" ]; then - wget -c "${GCC_SOURCE}${GCC}" - check_error $? "Error downloading GCC." -fi - -echo ">>> Creating destionation directory" -if [ ! -d "${PREFIX}" ]; then - mkdir -p "${PREFIX}" - test -d "${PREFIX}" - check_error $? "Unable to create ${PREFIX}." -fi - -echo ">>> Creating GCC work directory" -if [ ! -d "${OBJDIR}" ]; then - mkdir -p "${OBJDIR}" - test -d "${OBJDIR}" - check_error $? "Unable to create ${OBJDIR}." -fi - -echo ">>> Unpacking tarballs" -tar -xvzf "${BINUTILS}" -check_error $? "Error unpacking binutils." -tar -xvjf "${GCC}" -check_error $? "Error unpacking GCC." - -echo ">>> Compiling and installing binutils" -cd "${BINUTILSDIR}" -check_error $? "Change directory failed." -./configure "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" "--disable-nls" -check_error $? "Error configuring binutils." -make all install -check_error $? "Error compiling/installing binutils." - -echo ">>> Compiling and installing GCC" -cd "${OBJDIR}" -check_error $? "Change directory failed." -"${GCCDIR}/configure" "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" --with-gnu-as --with-gnu-ld --disable-nls --disable-threads --enable-languages=c --disable-multilib --disable-libgcj --without-headers --disable-shared -check_error $? "Error configuring GCC." -PATH="${PATH}:${PREFIX}/bin" make all-gcc install-gcc -check_error $? "Error compiling/installing GCC." - -echo -echo ">>> Cross-compiler for ${TARGET} installed." Index: kernel/contrib/toolchain/toolchain.ppc64.sh =================================================================== --- kernel/contrib/toolchain/toolchain.ppc64.sh (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,84 +1,0 @@ -#!/bin/bash - -# Cross-Compiler Toolchain for ${PLATFORM} -# by Martin Decky -# -# GPL'ed, copyleft -# - - -check_error() { - if [ "$1" -ne "0" ]; then - echo - echo "Script failed: $2" - exit - fi -} - -BINUTILS_VERSION="2.16.1" -GCC_VERSION="4.1.1" - -BINUTILS="binutils-${BINUTILS_VERSION}.tar.gz" -GCC="gcc-core-${GCC_VERSION}.tar.bz2" - -BINUTILS_SOURCE="ftp://ftp.gnu.org/gnu/binutils/" -GCC_SOURCE="ftp://ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}/" - -PLATFORM="ppc64" -WORKDIR=`pwd` -TARGET="${PLATFORM}-linux-gnu" -HOST="i686-pc-linux-gnu" -PREFIX="/usr/local/${PLATFORM}" -BINUTILSDIR="${WORKDIR}/binutils-${BINUTILS_VERSION}" -GCCDIR="${WORKDIR}/gcc-${GCC_VERSION}" -OBJDIR="${WORKDIR}/gcc-obj" - -echo ">>> Downloading tarballs" - -if [ ! -f "${BINUTILS}" ]; then - wget -c "${BINUTILS_SOURCE}${BINUTILS}" - check_error $? "Error downloading binutils." -fi -if [ ! -f "${GCC}" ]; then - wget -c "${GCC_SOURCE}${GCC}" - check_error $? "Error downloading GCC." -fi - -echo ">>> Creating destionation directory" -if [ ! -d "${PREFIX}" ]; then - mkdir -p "${PREFIX}" - test -d "${PREFIX}" - check_error $? "Unable to create ${PREFIX}." -fi - -echo ">>> Creating GCC work directory" -if [ ! -d "${OBJDIR}" ]; then - mkdir -p "${OBJDIR}" - test -d "${OBJDIR}" - check_error $? "Unable to create ${OBJDIR}." -fi - -echo ">>> Unpacking tarballs" -tar -xvzf "${BINUTILS}" -check_error $? "Error unpacking binutils." -tar -xvjf "${GCC}" -check_error $? "Error unpacking GCC." - -echo ">>> Compiling and installing binutils" -cd "${BINUTILSDIR}" -check_error $? "Change directory failed." -./configure "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" "--disable-nls" -check_error $? "Error configuring binutils." -make all install -check_error $? "Error compiling/installing binutils." - -echo ">>> Compiling and installing GCC" -cd "${OBJDIR}" -check_error $? "Change directory failed." -"${GCCDIR}/configure" "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" --with-gnu-as --with-gnu-ld --disable-nls --disable-threads --enable-languages=c --disable-multilib --disable-libgcj --without-headers --disable-shared -check_error $? "Error configuring GCC." -PATH="${PATH}:${PREFIX}/bin" make all-gcc install-gcc -check_error $? "Error compiling/installing GCC." - -echo -echo ">>> Cross-compiler for ${TARGET} installed." Index: kernel/contrib/toolchain/toolchain.sparc64.sh =================================================================== --- kernel/contrib/toolchain/toolchain.sparc64.sh (revision c6e314a78bffc7c64e7095fea28ffc280b031237) +++ (revision ) @@ -1,84 +1,0 @@ -#!/bin/bash - -# Cross-Compiler Toolchain for ${PLATFORM} -# by Martin Decky -# -# GPL'ed, copyleft -# - - -check_error() { - if [ "$1" -ne "0" ]; then - echo - echo "Script failed: $2" - exit - fi -} - -BINUTILS_VERSION="2.16.1" -GCC_VERSION="4.1.1" - -BINUTILS="binutils-${BINUTILS_VERSION}.tar.gz" -GCC="gcc-core-${GCC_VERSION}.tar.bz2" - -BINUTILS_SOURCE="ftp://ftp.gnu.org/gnu/binutils/" -GCC_SOURCE="ftp://ftp.gnu.org/gnu/gcc/gcc-${GCC_VERSION}/" - -PLATFORM="sparc64" -WORKDIR=`pwd` -TARGET="${PLATFORM}-linux-gnu" -HOST="i686-pc-linux-gnu" -PREFIX="/usr/local/${PLATFORM}" -BINUTILSDIR="${WORKDIR}/binutils-${BINUTILS_VERSION}" -GCCDIR="${WORKDIR}/gcc-${GCC_VERSION}" -OBJDIR="${WORKDIR}/gcc-obj" - -echo ">>> Downloading tarballs" - -if [ ! -f "${BINUTILS}" ]; then - wget -c "${BINUTILS_SOURCE}${BINUTILS}" - check_error $? "Error downloading binutils." -fi -if [ ! -f "${GCC}" ]; then - wget -c "${GCC_SOURCE}${GCC}" - check_error $? "Error downloading GCC." -fi - -echo ">>> Creating destionation directory" -if [ ! -d "${PREFIX}" ]; then - mkdir -p "${PREFIX}" - test -d "${PREFIX}" - check_error $? "Unable to create ${PREFIX}." -fi - -echo ">>> Creating GCC work directory" -if [ ! -d "${OBJDIR}" ]; then - mkdir -p "${OBJDIR}" - test -d "${OBJDIR}" - check_error $? "Unable to create ${OBJDIR}." -fi - -echo ">>> Unpacking tarballs" -tar -xvzf "${BINUTILS}" -check_error $? "Error unpacking binutils." -tar -xvjf "${GCC}" -check_error $? "Error unpacking GCC." - -echo ">>> Compiling and installing binutils" -cd "${BINUTILSDIR}" -check_error $? "Change directory failed." -./configure "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" "--disable-nls" -check_error $? "Error configuring binutils." -make all install -check_error $? "Error compiling/installing binutils." - -echo ">>> Compiling and installing GCC" -cd "${OBJDIR}" -check_error $? "Change directory failed." -"${GCCDIR}/configure" "--host=${HOST}" "--target=${TARGET}" "--prefix=${PREFIX}" "--program-prefix=${TARGET}-" --with-gnu-as --with-gnu-ld --disable-nls --disable-threads --enable-languages=c --disable-multilib --disable-libgcj --without-headers --disable-shared -check_error $? "Error configuring GCC." -PATH="${PATH}:${PREFIX}/bin" make all-gcc install-gcc -check_error $? "Error compiling/installing GCC." - -echo -echo ">>> Cross-compiler for ${TARGET} installed."