Index: uspace/drv/bus/usb/ohci/iface.c
===================================================================
--- uspace/drv/bus/usb/ohci/iface.c	(revision bc255aa49f163415977fd699f1505b45d5a03fed)
+++ uspace/drv/bus/usb/ohci/iface.c	(revision bc255aa49f163415977fd699f1505b45d5a03fed)
@@ -0,0 +1,441 @@
+/*
+ * Copyright (c) 2011 Vojtech Horky, Jan Vesely
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/** @addtogroup drvusbohci
+ * @{
+ */
+/** @file
+ * @brief OHCI driver hc interface implementation
+ */
+#include <ddf/driver.h>
+#include <errno.h>
+
+#include <usb/debug.h>
+#include <usb/host/endpoint.h>
+
+#include "iface.h"
+#include "hc.h"
+
+static inline int setup_batch(
+    ddf_fun_t *fun, usb_target_t target, usb_direction_t direction,
+    void *data, size_t size, void * setup_data, size_t setup_size,
+    usbhc_iface_transfer_in_callback_t in,
+    usbhc_iface_transfer_out_callback_t out, void *arg, const char* name,
+    hc_t **hc, usb_transfer_batch_t **batch)
+{
+	assert(hc);
+	assert(batch);
+	assert(fun);
+	*hc = fun_to_hc(fun);
+	assert(*hc);
+
+	size_t res_bw;
+	endpoint_t *ep = hc_get_endpoint(*hc,
+	    target.address, target.endpoint, direction, &res_bw);
+	if (ep == NULL) {
+		usb_log_error("Endpoint(%d:%d) not registered for %s.\n",
+		    target.address, target.endpoint, name);
+		return ENOENT;
+	}
+
+	usb_log_debug("%s %d:%d %zu(%zu).\n",
+	    name, target.address, target.endpoint, size, ep->max_packet_size);
+
+	const size_t bw = bandwidth_count_usb11(
+	    ep->speed, ep->transfer_type, size, ep->max_packet_size);
+	if (res_bw < bw) {
+		usb_log_error("Endpoint(%d:%d) %s needs %zu bw "
+		    "but only %zu is reserved.\n",
+		    target.address, target.endpoint, name, bw, res_bw);
+		return ENOSPC;
+	}
+
+	*batch = batch_get(
+	    fun, ep, data, size, setup_data, setup_size, in, out, arg);
+	if (!*batch)
+		return ENOMEM;
+	return EOK;
+}
+/*----------------------------------------------------------------------------*/
+/** Request address interface function
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] speed Speed to associate with the new default address.
+ * @param[out] address Place to write a new address.
+ * @return Error code.
+ */
+static int request_address(
+    ddf_fun_t *fun, usb_speed_t speed, usb_address_t *address)
+{
+	assert(fun);
+	hc_t *hc = fun_to_hc(fun);
+	assert(hc);
+	assert(address);
+
+	usb_log_debug("Address request with speed %d.\n", speed);
+	*address = device_keeper_get_free_address(&hc->manager, speed);
+	usb_log_debug("Address request with result: %d.\n", *address);
+	if (*address <= 0)
+		return *address;
+	return EOK;
+}
+/*----------------------------------------------------------------------------*/
+/** Bind address interface function
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] address Address of the device
+ * @param[in] handle Devman handle of the device driver.
+ * @return Error code.
+ */
+static int bind_address(
+  ddf_fun_t *fun, usb_address_t address, devman_handle_t handle)
+{
+	assert(fun);
+	hc_t *hc = fun_to_hc(fun);
+	assert(hc);
+	usb_log_debug("Address bind %d-%" PRIun ".\n", address, handle);
+	usb_device_keeper_bind(&hc->manager, address, handle);
+	return EOK;
+}
+
+
+/** Find device handle by address interface function.
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] address Address in question.
+ * @param[out] handle Where to store device handle if found.
+ * @return Error code.
+ */
+static int find_by_address(ddf_fun_t *fun, usb_address_t address,
+    devman_handle_t *handle)
+{
+	assert(fun);
+	hc_t *hc = fun_to_hc(fun);
+	assert(hc);
+	bool found =
+	    usb_device_keeper_find_by_address(&hc->manager, address, handle);
+	return found ? EOK : ENOENT;
+}
+
+/*----------------------------------------------------------------------------*/
+/** Release address interface function
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] address USB address to be released.
+ * @return Error code.
+ */
+static int release_address(ddf_fun_t *fun, usb_address_t address)
+{
+	assert(fun);
+	hc_t *hc = fun_to_hc(fun);
+	assert(hc);
+	usb_log_debug("Address release %d.\n", address);
+	usb_device_keeper_release(&hc->manager, address);
+	return EOK;
+}
+/*----------------------------------------------------------------------------*/
+/** Register endpoint for bandwidth reservation.
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] address USB address of the device.
+ * @param[in] ep_speed Endpoint speed (invalid means to use device one).
+ * @param[in] endpoint Endpoint number.
+ * @param[in] transfer_type USB transfer type.
+ * @param[in] direction Endpoint data direction.
+ * @param[in] max_packet_size Max packet size of the endpoint.
+ * @param[in] interval Polling interval.
+ * @return Error code.
+ */
+static int register_endpoint(ddf_fun_t *fun,
+    usb_address_t address, usb_speed_t ep_speed, usb_endpoint_t endpoint,
+    usb_transfer_type_t transfer_type, usb_direction_t direction,
+    size_t max_packet_size, unsigned int interval)
+{
+	hc_t *hc = fun_to_hc(fun);
+	assert(hc);
+
+	usb_speed_t speed = usb_device_keeper_get_speed(&hc->manager, address);
+	if (speed >= USB_SPEED_MAX) {
+		speed = ep_speed;
+	}
+	const size_t size = max_packet_size;
+
+	usb_log_debug("Register endpoint %d:%d %s %s(%d) %zu(%zu) %u.\n",
+	    address, endpoint, usb_str_transfer_type(transfer_type),
+	    usb_str_speed(speed), direction, size, max_packet_size, interval);
+
+	return hc_add_endpoint(hc, address, endpoint, speed, transfer_type,
+	    direction, max_packet_size, size, interval);
+}
+/*----------------------------------------------------------------------------*/
+static int unregister_endpoint(
+    ddf_fun_t *fun, usb_address_t address,
+    usb_endpoint_t endpoint, usb_direction_t direction)
+{
+	hc_t *hc = fun_to_hc(fun);
+	assert(hc);
+	usb_log_debug("Unregister endpoint %d:%d %d.\n",
+	    address, endpoint, direction);
+	return hc_remove_endpoint(hc, address, endpoint, direction);
+}
+/*----------------------------------------------------------------------------*/
+/** Schedule interrupt out transfer.
+ *
+ * The callback is supposed to be called once the transfer (on the wire) is
+ * complete regardless of the outcome.
+ * However, the callback could be called only when this function returns
+ * with success status (i.e. returns EOK).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] target Target pipe (address and endpoint number) specification.
+ * @param[in] data Data to be sent (in USB endianess, allocated and deallocated
+ *	by the caller).
+ * @param[in] size Size of the @p data buffer in bytes.
+ * @param[in] callback Callback to be issued once the transfer is complete.
+ * @param[in] arg Pass-through argument to the callback.
+ * @return Error code.
+ */
+static int interrupt_out(
+    ddf_fun_t *fun, usb_target_t target, void *data,
+    size_t size, usbhc_iface_transfer_out_callback_t callback, void *arg)
+{
+	usb_transfer_batch_t *batch = NULL;
+	hc_t *hc = NULL;
+	int ret = setup_batch(fun, target, USB_DIRECTION_OUT, data, size,
+	    NULL, 0, NULL, callback, arg, "Interrupt OUT", &hc, &batch);
+	if (ret != EOK)
+		return ret;
+	batch_interrupt_out(batch);
+	ret = hc_schedule(hc, batch);
+	if (ret != EOK) {
+		usb_transfer_batch_dispose(batch);
+	}
+	return ret;
+}
+/*----------------------------------------------------------------------------*/
+/** Schedule interrupt in transfer.
+ *
+ * The callback is supposed to be called once the transfer (on the wire) is
+ * complete regardless of the outcome.
+ * However, the callback could be called only when this function returns
+ * with success status (i.e. returns EOK).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] target Target pipe (address and endpoint number) specification.
+ * @param[in] data Buffer where to store the data (in USB endianess,
+ *	allocated and deallocated by the caller).
+ * @param[in] size Size of the @p data buffer in bytes.
+ * @param[in] callback Callback to be issued once the transfer is complete.
+ * @param[in] arg Pass-through argument to the callback.
+ * @return Error code.
+ */
+static int interrupt_in(
+    ddf_fun_t *fun, usb_target_t target, void *data,
+    size_t size, usbhc_iface_transfer_in_callback_t callback, void *arg)
+{
+	usb_transfer_batch_t *batch = NULL;
+	hc_t *hc = NULL;
+	int ret = setup_batch(fun, target, USB_DIRECTION_IN, data, size,
+	    NULL, 0, callback, NULL, arg, "Interrupt IN", &hc, &batch);
+	if (ret != EOK)
+		return ret;
+	batch_interrupt_in(batch);
+	ret = hc_schedule(hc, batch);
+	if (ret != EOK) {
+		usb_transfer_batch_dispose(batch);
+	}
+	return ret;
+}
+/*----------------------------------------------------------------------------*/
+/** Schedule bulk out transfer.
+ *
+ * The callback is supposed to be called once the transfer (on the wire) is
+ * complete regardless of the outcome.
+ * However, the callback could be called only when this function returns
+ * with success status (i.e. returns EOK).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] target Target pipe (address and endpoint number) specification.
+ * @param[in] data Data to be sent (in USB endianess, allocated and deallocated
+ *	by the caller).
+ * @param[in] size Size of the @p data buffer in bytes.
+ * @param[in] callback Callback to be issued once the transfer is complete.
+ * @param[in] arg Pass-through argument to the callback.
+ * @return Error code.
+ */
+static int bulk_out(
+    ddf_fun_t *fun, usb_target_t target, void *data,
+    size_t size, usbhc_iface_transfer_out_callback_t callback, void *arg)
+{
+	usb_transfer_batch_t *batch = NULL;
+	hc_t *hc = NULL;
+	int ret = setup_batch(fun, target, USB_DIRECTION_OUT, data, size,
+	    NULL, 0, NULL, callback, arg, "Bulk OUT", &hc, &batch);
+	if (ret != EOK)
+		return ret;
+	batch_bulk_out(batch);
+	ret = hc_schedule(hc, batch);
+	if (ret != EOK) {
+		usb_transfer_batch_dispose(batch);
+	}
+	return ret;
+}
+/*----------------------------------------------------------------------------*/
+/** Schedule bulk in transfer.
+ *
+ * The callback is supposed to be called once the transfer (on the wire) is
+ * complete regardless of the outcome.
+ * However, the callback could be called only when this function returns
+ * with success status (i.e. returns EOK).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] target Target pipe (address and endpoint number) specification.
+ * @param[in] data Buffer where to store the data (in USB endianess,
+ *	allocated and deallocated by the caller).
+ * @param[in] size Size of the @p data buffer in bytes.
+ * @param[in] callback Callback to be issued once the transfer is complete.
+ * @param[in] arg Pass-through argument to the callback.
+ * @return Error code.
+ */
+static int bulk_in(
+    ddf_fun_t *fun, usb_target_t target, void *data,
+    size_t size, usbhc_iface_transfer_in_callback_t callback, void *arg)
+{
+	usb_transfer_batch_t *batch = NULL;
+	hc_t *hc = NULL;
+	int ret = setup_batch(fun, target, USB_DIRECTION_IN, data, size,
+	    NULL, 0, callback, NULL, arg, "Bulk IN", &hc, &batch);
+	if (ret != EOK)
+		return ret;
+	batch_bulk_in(batch);
+	ret = hc_schedule(hc, batch);
+	if (ret != EOK) {
+		usb_transfer_batch_dispose(batch);
+	}
+	return ret;
+}
+/*----------------------------------------------------------------------------*/
+/** Schedule control write transfer.
+ *
+ * The callback is supposed to be called once the transfer (on the wire) is
+ * complete regardless of the outcome.
+ * However, the callback could be called only when this function returns
+ * with success status (i.e. returns EOK).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] target Target pipe (address and endpoint number) specification.
+ * @param[in] setup_packet Setup packet buffer (in USB endianess, allocated
+ *	and deallocated by the caller).
+ * @param[in] setup_size Size of @p setup_packet buffer in bytes.
+ * @param[in] data_buffer Data buffer (in USB endianess, allocated and
+ *	deallocated by the caller).
+ * @param[in] size Size of @p data_buffer buffer in bytes.
+ * @param[in] callback Callback to be issued once the transfer is complete.
+ * @param[in] arg Pass-through argument to the callback.
+ * @return Error code.
+ */
+static int control_write(
+    ddf_fun_t *fun, usb_target_t target,
+    void *setup_data, size_t setup_size, void *data, size_t size,
+    usbhc_iface_transfer_out_callback_t callback, void *arg)
+{
+	usb_transfer_batch_t *batch = NULL;
+	hc_t *hc = NULL;
+	int ret = setup_batch(fun, target, USB_DIRECTION_BOTH, data, size,
+	    setup_data, setup_size, NULL, callback, arg, "Control WRITE",
+	    &hc, &batch);
+	if (ret != EOK)
+		return ret;
+	usb_endpoint_manager_reset_if_need(&hc->ep_manager, target, setup_data);
+	batch_control_write(batch);
+	ret = hc_schedule(hc, batch);
+	if (ret != EOK) {
+		usb_transfer_batch_dispose(batch);
+	}
+	return ret;
+}
+/*----------------------------------------------------------------------------*/
+/** Schedule control read transfer.
+ *
+ * The callback is supposed to be called once the transfer (on the wire) is
+ * complete regardless of the outcome.
+ * However, the callback could be called only when this function returns
+ * with success status (i.e. returns EOK).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] target Target pipe (address and endpoint number) specification.
+ * @param[in] setup_packet Setup packet buffer (in USB endianess, allocated
+ *	and deallocated by the caller).
+ * @param[in] setup_size Size of @p setup_packet buffer in bytes.
+ * @param[in] data_buffer Buffer where to store the data (in USB endianess,
+ *	allocated and deallocated by the caller).
+ * @param[in] size Size of @p data_buffer buffer in bytes.
+ * @param[in] callback Callback to be issued once the transfer is complete.
+ * @param[in] arg Pass-through argument to the callback.
+ * @return Error code.
+ */
+static int control_read(
+    ddf_fun_t *fun, usb_target_t target,
+    void *setup_data, size_t setup_size, void *data, size_t size,
+    usbhc_iface_transfer_in_callback_t callback, void *arg)
+{
+	usb_transfer_batch_t *batch = NULL;
+	hc_t *hc = NULL;
+	int ret = setup_batch(fun, target, USB_DIRECTION_BOTH, data, size,
+	    setup_data, setup_size, callback, NULL, arg, "Control READ",
+	    &hc, &batch);
+	if (ret != EOK)
+		return ret;
+	batch_control_read(batch);
+	ret = hc_schedule(hc, batch);
+	if (ret != EOK) {
+		usb_transfer_batch_dispose(batch);
+	}
+	return ret;
+}
+/*----------------------------------------------------------------------------*/
+usbhc_iface_t hc_iface = {
+	.request_address = request_address,
+	.bind_address = bind_address,
+	.find_by_address = find_by_address,
+	.release_address = release_address,
+
+	.register_endpoint = register_endpoint,
+	.unregister_endpoint = unregister_endpoint,
+
+	.interrupt_out = interrupt_out,
+	.interrupt_in = interrupt_in,
+
+	.bulk_out = bulk_out,
+	.bulk_in = bulk_in,
+
+	.control_write = control_write,
+	.control_read = control_read,
+};
+/**
+ * @}
+ */
Index: uspace/drv/bus/usb/ohci/iface.h
===================================================================
--- uspace/drv/bus/usb/ohci/iface.h	(revision bc255aa49f163415977fd699f1505b45d5a03fed)
+++ uspace/drv/bus/usb/ohci/iface.h	(revision bc255aa49f163415977fd699f1505b45d5a03fed)
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2011 Vojtech Horky
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/** @addtogroup drvusbohci
+ * @{
+ */
+/** @file
+ * Common OHCI definitions.
+ */
+#ifndef DRV_OHCI_IFACE_H
+#define DRV_OHCI_IFACE_H
+
+#include <usbhc_iface.h>
+
+extern usbhc_iface_t hc_iface;
+
+#endif
+/**
+ * @}
+ */
+
Index: uspace/drv/bus/usb/uhci/iface.c
===================================================================
--- uspace/drv/bus/usb/uhci/iface.c	(revision bc255aa49f163415977fd699f1505b45d5a03fed)
+++ uspace/drv/bus/usb/uhci/iface.c	(revision bc255aa49f163415977fd699f1505b45d5a03fed)
@@ -0,0 +1,405 @@
+/*
+ * Copyright (c) 2011 Vojtech Horky, Jan Vesely
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/** @addtogroup drvusbuhcihc
+ * @{
+ */
+/** @file
+ * @brief UHCI driver hc interface implementation
+ */
+#include <ddf/driver.h>
+#include <errno.h>
+
+#include <usb/debug.h>
+#include <usb/host/endpoint.h>
+
+#include "iface.h"
+#include "batch.h"
+#include "hc.h"
+
+static inline int setup_batch(
+    ddf_fun_t *fun, usb_target_t target, usb_direction_t direction,
+    void *data, size_t size, void * setup_data, size_t setup_size,
+    usbhc_iface_transfer_in_callback_t in,
+    usbhc_iface_transfer_out_callback_t out, void *arg, const char* name,
+    hc_t **hc, usb_transfer_batch_t **batch)
+{
+	assert(hc);
+	assert(batch);
+	assert(fun);
+	*hc = fun_to_hc(fun);
+	assert(*hc);
+
+	size_t res_bw;
+	endpoint_t *ep = usb_endpoint_manager_get_ep(&(*hc)->ep_manager,
+	    target.address, target.endpoint, direction, &res_bw);
+	if (ep == NULL) {
+		usb_log_error("Endpoint(%d:%d) not registered for %s.\n",
+		    target.address, target.endpoint, name);
+		return ENOENT;
+	}
+
+	usb_log_debug2("%s %d:%d %zu(%zu).\n",
+	    name, target.address, target.endpoint, size, ep->max_packet_size);
+
+	const size_t bw = bandwidth_count_usb11(
+	    ep->speed, ep->transfer_type, size, ep->max_packet_size);
+	if (res_bw < bw) {
+		usb_log_error("Endpoint(%d:%d) %s needs %zu bw "
+		    "but only %zu is reserved.\n",
+		    target.address, target.endpoint, name, bw, res_bw);
+		return ENOSPC;
+	}
+
+	*batch = batch_get(
+	        fun, ep, data, size, setup_data, setup_size, in, out, arg);
+	if (!*batch)
+		return ENOMEM;
+	return EOK;
+}
+/*----------------------------------------------------------------------------*/
+/** Request address interface function
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] speed Speed to associate with the new default address.
+ * @param[out] address Place to write a new address.
+ * @return Error code.
+ */
+static int request_address(
+    ddf_fun_t *fun, usb_speed_t speed, usb_address_t *address)
+{
+	assert(fun);
+	hc_t *hc = fun_to_hc(fun);
+	assert(hc);
+	assert(address);
+
+	usb_log_debug("Address request with speed %d.\n", speed);
+	*address = device_keeper_get_free_address(&hc->manager, speed);
+	usb_log_debug("Address request with result: %d.\n", *address);
+	if (*address <= 0)
+		return *address;
+	return EOK;
+}
+/*----------------------------------------------------------------------------*/
+/** Bind address interface function
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] address Address of the device
+ * @param[in] handle Devman handle of the device driver.
+ * @return Error code.
+ */
+static int bind_address(
+  ddf_fun_t *fun, usb_address_t address, devman_handle_t handle)
+{
+	assert(fun);
+	hc_t *hc = fun_to_hc(fun);
+	assert(hc);
+	usb_log_debug("Address bind %d-%" PRIun ".\n", address, handle);
+	usb_device_keeper_bind(&hc->manager, address, handle);
+	return EOK;
+}
+/*----------------------------------------------------------------------------*/
+/** Find device handle by address interface function.
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] address Address in question.
+ * @param[out] handle Where to store device handle if found.
+ * @return Error code.
+ */
+static int find_by_address(ddf_fun_t *fun, usb_address_t address,
+    devman_handle_t *handle)
+{
+	assert(fun);
+	hc_t *hc = fun_to_hc(fun);
+	assert(hc);
+	const bool found =
+	    usb_device_keeper_find_by_address(&hc->manager, address, handle);
+	return found ? EOK : ENOENT;
+}
+/*----------------------------------------------------------------------------*/
+/** Release address interface function
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] address USB address to be released.
+ * @return Error code.
+ */
+static int release_address(ddf_fun_t *fun, usb_address_t address)
+{
+	assert(fun);
+	hc_t *hc = fun_to_hc(fun);
+	assert(hc);
+	usb_log_debug("Address release %d.\n", address);
+	usb_device_keeper_release(&hc->manager, address);
+	return EOK;
+}
+/*----------------------------------------------------------------------------*/
+static int register_endpoint(
+    ddf_fun_t *fun, usb_address_t address, usb_speed_t ep_speed,
+    usb_endpoint_t endpoint,
+    usb_transfer_type_t transfer_type, usb_direction_t direction,
+    size_t max_packet_size, unsigned int interval)
+{
+	assert(fun);
+	hc_t *hc = fun_to_hc(fun);
+	assert(hc);
+	const size_t size = max_packet_size;
+	usb_speed_t speed = usb_device_keeper_get_speed(&hc->manager, address);
+	if (speed >= USB_SPEED_MAX) {
+		speed = ep_speed;
+	}
+	usb_log_debug("Register endpoint %d:%d %s-%s %s %zuB %ums.\n",
+	    address, endpoint, usb_str_transfer_type(transfer_type),
+	    usb_str_direction(direction), usb_str_speed(speed),
+	    max_packet_size, interval);
+
+	return usb_endpoint_manager_add_ep(&hc->ep_manager, address, endpoint,
+	    direction, transfer_type, speed, max_packet_size, size);
+}
+/*----------------------------------------------------------------------------*/
+static int unregister_endpoint(
+    ddf_fun_t *fun, usb_address_t address,
+    usb_endpoint_t endpoint, usb_direction_t direction)
+{
+	assert(fun);
+	hc_t *hc = fun_to_hc(fun);
+	assert(hc);
+	usb_log_debug("Unregister endpoint %d:%d %s.\n",
+	    address, endpoint, usb_str_direction(direction));
+	return usb_endpoint_manager_unregister_ep(&hc->ep_manager, address,
+	    endpoint, direction);
+}
+/*----------------------------------------------------------------------------*/
+/** Interrupt out transaction interface function
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] target USB device to write to.
+ * @param[in] data Source of data.
+ * @param[in] size Size of data source.
+ * @param[in] callback Function to call on transaction completion
+ * @param[in] arg Additional for callback function.
+ * @return Error code.
+ */
+static int interrupt_out(
+    ddf_fun_t *fun, usb_target_t target, void *data,
+    size_t size, usbhc_iface_transfer_out_callback_t callback, void *arg)
+{
+	usb_transfer_batch_t *batch = NULL;
+	hc_t *hc = NULL;
+	int ret = setup_batch(fun, target, USB_DIRECTION_OUT, data, size,
+	    NULL, 0, NULL, callback, arg, "Interrupt OUT", &hc, &batch);
+	if (ret != EOK)
+		return ret;
+	assert(batch);
+	assert(hc);
+	batch_interrupt_out(batch);
+	ret = hc_schedule(hc, batch);
+	if (ret != EOK) {
+		usb_transfer_batch_dispose(batch);
+	}
+	return ret;
+}
+/*----------------------------------------------------------------------------*/
+/** Interrupt in transaction interface function
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] target USB device to write to.
+ * @param[out] data Data destination.
+ * @param[in] size Size of data source.
+ * @param[in] callback Function to call on transaction completion
+ * @param[in] arg Additional for callback function.
+ * @return Error code.
+ */
+static int interrupt_in(
+    ddf_fun_t *fun, usb_target_t target, void *data,
+    size_t size, usbhc_iface_transfer_in_callback_t callback, void *arg)
+{
+	usb_transfer_batch_t *batch = NULL;
+	hc_t *hc = NULL;
+	int ret = setup_batch(fun, target, USB_DIRECTION_IN, data, size,
+	    NULL, 0, callback, NULL, arg, "Interrupt IN", &hc, &batch);
+	if (ret != EOK)
+		return ret;
+	assert(batch);
+	assert(hc);
+	batch_interrupt_in(batch);
+	ret = hc_schedule(hc, batch);
+	if (ret != EOK) {
+		usb_transfer_batch_dispose(batch);
+	}
+	return ret;
+}
+/*----------------------------------------------------------------------------*/
+/** Bulk out transaction interface function
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] target USB device to write to.
+ * @param[in] data Source of data.
+ * @param[in] size Size of data source.
+ * @param[in] callback Function to call on transaction completion
+ * @param[in] arg Additional for callback function.
+ * @return Error code.
+ */
+static int bulk_out(
+    ddf_fun_t *fun, usb_target_t target, void *data,
+    size_t size, usbhc_iface_transfer_out_callback_t callback, void *arg)
+{
+	usb_transfer_batch_t *batch = NULL;
+	hc_t *hc = NULL;
+	int ret = setup_batch(fun, target, USB_DIRECTION_OUT, data, size,
+	    NULL, 0, NULL, callback, arg, "Bulk OUT", &hc, &batch);
+	if (ret != EOK)
+		return ret;
+	assert(batch);
+	assert(hc);
+	batch_bulk_out(batch);
+	ret = hc_schedule(hc, batch);
+	if (ret != EOK) {
+		usb_transfer_batch_dispose(batch);
+	}
+	return ret;
+}
+/*----------------------------------------------------------------------------*/
+/** Bulk in transaction interface function
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] target USB device to write to.
+ * @param[out] data Data destination.
+ * @param[in] size Size of data source.
+ * @param[in] callback Function to call on transaction completion
+ * @param[in] arg Additional for callback function.
+ * @return Error code.
+ */
+static int bulk_in(
+    ddf_fun_t *fun, usb_target_t target, void *data,
+    size_t size, usbhc_iface_transfer_in_callback_t callback, void *arg)
+{
+	usb_transfer_batch_t *batch = NULL;
+	hc_t *hc = NULL;
+	int ret = setup_batch(fun, target, USB_DIRECTION_IN, data, size,
+	    NULL, 0, callback, NULL, arg, "Bulk IN", &hc, &batch);
+	if (ret != EOK)
+		return ret;
+	assert(batch);
+	assert(hc);
+	batch_bulk_in(batch);
+	ret = hc_schedule(hc, batch);
+	if (ret != EOK) {
+		usb_transfer_batch_dispose(batch);
+	}
+	return ret;
+}
+/*----------------------------------------------------------------------------*/
+/** Control write transaction interface function
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] target USB device to write to.
+ * @param[in] setup_data Data to send with SETUP transfer.
+ * @param[in] setup_size Size of data to send with SETUP transfer (always 8B).
+ * @param[in] data Source of data.
+ * @param[in] size Size of data source.
+ * @param[in] callback Function to call on transaction completion.
+ * @param[in] arg Additional for callback function.
+ * @return Error code.
+ */
+static int control_write(
+    ddf_fun_t *fun, usb_target_t target,
+    void *setup_data, size_t setup_size, void *data, size_t size,
+    usbhc_iface_transfer_out_callback_t callback, void *arg)
+{
+	usb_transfer_batch_t *batch = NULL;
+	hc_t *hc = NULL;
+	int ret = setup_batch(fun, target, USB_DIRECTION_BOTH, data, size,
+	    setup_data, setup_size, NULL, callback, arg, "Control WRITE",
+	    &hc, &batch);
+	if (ret != EOK)
+		return ret;
+	assert(batch);
+	assert(hc);
+	usb_endpoint_manager_reset_if_need(&hc->ep_manager, target, setup_data);
+	batch_control_write(batch);
+	ret = hc_schedule(hc, batch);
+	if (ret != EOK) {
+		usb_transfer_batch_dispose(batch);
+	}
+	return ret;
+}
+/*----------------------------------------------------------------------------*/
+/** Control read transaction interface function
+ *
+ * @param[in] fun DDF function that was called.
+ * @param[in] target USB device to write to.
+ * @param[in] setup_data Data to send with SETUP packet.
+ * @param[in] setup_size Size of data to send with SETUP packet (should be 8B).
+ * @param[out] data Source of data.
+ * @param[in] size Size of data source.
+ * @param[in] callback Function to call on transaction completion.
+ * @param[in] arg Additional for callback function.
+ * @return Error code.
+ */
+static int control_read(
+    ddf_fun_t *fun, usb_target_t target,
+    void *setup_data, size_t setup_size, void *data, size_t size,
+    usbhc_iface_transfer_in_callback_t callback, void *arg)
+{
+	usb_transfer_batch_t *batch = NULL;
+	hc_t *hc = NULL;
+	int ret = setup_batch(fun, target, USB_DIRECTION_BOTH, data, size,
+	    setup_data, setup_size, callback, NULL, arg, "Control READ",
+	    &hc, &batch);
+	if (ret != EOK)
+		return ret;
+	assert(batch);
+	assert(hc);
+	batch_control_read(batch);
+	ret = hc_schedule(hc, batch);
+	if (ret != EOK) {
+		usb_transfer_batch_dispose(batch);
+	}
+	return ret;
+}
+/*----------------------------------------------------------------------------*/
+usbhc_iface_t hc_iface = {
+	.request_address = request_address,
+	.bind_address = bind_address,
+	.find_by_address = find_by_address,
+	.release_address = release_address,
+
+	.register_endpoint = register_endpoint,
+	.unregister_endpoint = unregister_endpoint,
+
+	.interrupt_out = interrupt_out,
+	.interrupt_in = interrupt_in,
+
+	.bulk_out = bulk_out,
+	.bulk_in = bulk_in,
+
+	.control_write = control_write,
+	.control_read = control_read,
+};
+/**
+ * @}
+ */
Index: uspace/drv/bus/usb/uhci/iface.h
===================================================================
--- uspace/drv/bus/usb/uhci/iface.h	(revision bc255aa49f163415977fd699f1505b45d5a03fed)
+++ uspace/drv/bus/usb/uhci/iface.h	(revision bc255aa49f163415977fd699f1505b45d5a03fed)
@@ -0,0 +1,45 @@
+/*
+ * Copyright (c) 2010 Vojtech Horky
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/** @addtogroup drvusbuhcihc
+ * @{
+ */
+/** @file
+ * @brief UHCI driver iface
+ */
+#ifndef DRV_UHCI_IFACE_H
+#define DRV_UHCI_IFACE_H
+
+#include <usbhc_iface.h>
+
+extern usbhc_iface_t hc_iface;
+
+#endif
+/**
+ * @}
+ */
Index: uspace/drv/bus/usb/usbmast/scsi.h
===================================================================
--- uspace/drv/bus/usb/usbmast/scsi.h	(revision bc255aa49f163415977fd699f1505b45d5a03fed)
+++ uspace/drv/bus/usb/usbmast/scsi.h	(revision bc255aa49f163415977fd699f1505b45d5a03fed)
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2011 Vojtech Horky
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/** @addtogroup drvusbmast
+ * @{
+ */
+/** @file
+ * SCSI related structures.
+ */
+
+#ifndef USB_USBMAST_SCSI_H_
+#define USB_USBMAST_SCSI_H_
+
+#include <sys/types.h>
+#include <usb/usb.h>
+
+typedef struct {
+	uint8_t op_code;
+	uint8_t lun_evpd;
+	uint8_t page_code;
+	uint16_t alloc_length;
+	uint8_t ctrl;
+} __attribute__((packed)) scsi_cmd_inquiry_t;
+
+#endif
+
+/**
+ * @}
+ */