Changeset 8dd039a in mainline for uspace/drv/usbhub/utils.c
- Timestamp:
- 2010-12-19T19:41:03Z (14 years ago)
- Branches:
- lfn, master, serial, ticket/834-toolchain-update, topic/msim-upgrade, topic/simplify-dev-export
- Children:
- 58854f2, ab49a0d
- Parents:
- 557c7d0 (diff), e080332 (diff)
Note: this is a merge changeset, the changes displayed below correspond to the merge itself.
Use the(diff)
links above to see all the changes relative to each parent. - File:
-
- 1 edited
Legend:
- Unmodified
- Added
- Removed
-
uspace/drv/usbhub/utils.c
r557c7d0 r8dd039a 31 31 */ 32 32 /** @file 33 * @brief Hub driver.33 * @brief various utilities 34 34 */ 35 35 #include <driver.h> … … 90 90 91 91 if (sdescriptor[1] != USB_DESCTYPE_HUB) { 92 printf("[usb_hub] wrong descriptor %x\n",sdescriptor[1]);92 dprintf(1,"[usb_hub] wrong descriptor %x\n",sdescriptor[1]); 93 93 return NULL; 94 94 } … … 102 102 result->pwr_on_2_good_time = sdescriptor[5]; 103 103 result->current_requirement = sdescriptor[6]; 104 size_t var_size = result->ports_count / 8 + ((result->ports_count % 8 > 0) ? 1 : 0); 104 size_t var_size = result->ports_count / 8 + ((result->ports_count % 8 > 0) 105 ? 1 : 0); 105 106 result->devices_removable = (uint8_t*) malloc(var_size); 106 107 //printf("[usb_hub] getting removable devices data \n"); … … 198 199 } 199 200 200 //list implementation 201 202 usb_general_list_t * usb_lst_create(void) { 203 usb_general_list_t* result = usb_new(usb_general_list_t); 204 usb_lst_init(result); 205 return result; 206 } 207 208 void usb_lst_init(usb_general_list_t * lst) { 209 lst->prev = lst; 210 lst->next = lst; 211 lst->data = NULL; 212 } 213 214 void usb_lst_prepend(usb_general_list_t* item, void* data) { 215 usb_general_list_t* appended = usb_new(usb_general_list_t); 216 appended->data = data; 217 appended->next = item; 218 appended->prev = item->prev; 219 item->prev->next = appended; 220 item->prev = appended; 221 } 222 223 void usb_lst_append(usb_general_list_t* item, void* data) { 224 usb_general_list_t* appended = usb_new(usb_general_list_t); 225 appended->data = data; 226 appended->next = item->next; 227 appended->prev = item; 228 item->next->prev = appended; 229 item->next = appended; 230 } 231 232 void usb_lst_remove(usb_general_list_t* item) { 233 item->next->prev = item->prev; 234 item->prev->next = item->next; 235 } 236 201 202 /* 203 * method for testing port status bitmap 204 237 205 static void usb_hub_test_port_status(void) { 238 206 printf("[usb_hub] -------------port status test---------\n"); … … 286 254 //printf("this should be 0: %d \n",usb_port_get_bit(&status,4)); 287 255 288 289 290 291 } 292 293 //********************************************* 294 // 295 // hub driver code, initialization 296 // 297 //********************************************* 298 299 usb_hub_info_t * usb_create_hub_info(device_t * device, int hc) { 300 usb_hub_info_t* result = usb_new(usb_hub_info_t); 301 //result->device = device; 302 result->port_count = -1; 303 /// \TODO is this correct? is the device stored? 304 result->device = device; 305 306 307 //printf("[usb_hub] phone to hc = %d\n", hc); 308 if (hc < 0) { 309 return result; 310 } 311 //get some hub info 312 usb_address_t addr = usb_drv_get_my_address(hc, device); 313 printf("[usb_hub] addres of newly created hub = %d\n", addr); 314 /*if(addr<0){ 315 //return result; 316 317 }*/ 318 319 result->usb_device = usb_new(usb_hcd_attached_device_info_t); 320 result->usb_device->address = addr; 321 322 // get hub descriptor 323 usb_target_t target; 324 target.address = addr; 325 target.endpoint = 0; 326 usb_device_request_setup_packet_t request; 327 //printf("[usb_hub] creating descriptor request\n"); 328 usb_hub_set_descriptor_request(&request); 329 330 //printf("[usb_hub] creating serialized descriptor\n"); 331 void * serialized_descriptor = malloc(USB_HUB_MAX_DESCRIPTOR_SIZE); 332 usb_hub_descriptor_t * descriptor; 333 size_t received_size; 334 int opResult; 335 //printf("[usb_hub] starting control transaction\n"); 336 opResult = usb_drv_sync_control_read( 337 hc, target, &request, serialized_descriptor, 338 USB_HUB_MAX_DESCRIPTOR_SIZE, &received_size); 339 if (opResult != EOK) { 340 printf("[usb_hub] failed when receiving hub descriptor, badcode = %d\n",opResult); 341 ///\TODO memory leak will occur here! 342 return result; 343 } 344 //printf("[usb_hub] deserializing descriptor\n"); 345 descriptor = usb_deserialize_hub_desriptor(serialized_descriptor); 346 if(descriptor==NULL){ 347 printf("[usb_hub] could not deserialize descriptor \n"); 348 result->port_count = 1;///\TODO this code is only for debug!!! 349 return result; 350 } 351 //printf("[usb_hub] setting port count to %d\n",descriptor->ports_count); 352 result->port_count = descriptor->ports_count; 353 result->attached_devs = (usb_hub_attached_device_t*) 354 malloc((result->port_count+1) * sizeof(usb_hub_attached_device_t)); 355 int i; 356 for(i=0;i<result->port_count+1;++i){ 357 result->attached_devs[i].devman_handle=0; 358 result->attached_devs[i].address=0; 359 } 360 //printf("[usb_hub] freeing data\n"); 361 free(serialized_descriptor); 362 free(descriptor->devices_removable); 363 free(descriptor); 364 365 //finish 366 367 printf("[usb_hub] hub info created\n"); 368 369 return result; 370 } 371 372 int usb_add_hub_device(device_t *dev) { 373 printf(NAME ": add_hub_device(handle=%d)\n", (int) dev->handle); 374 printf("[usb_hub] hub device\n"); 375 376 /* 377 * We are some (probably deeply nested) hub. 378 * Thus, assign our own operations and explore already 379 * connected devices. 380 */ 381 382 //create the hub structure 383 //get hc connection 384 /// \TODO correct params 385 int hc = usb_drv_hc_connect(dev, 0); 386 387 usb_hub_info_t * hub_info = usb_create_hub_info(dev, hc); 388 int port; 389 int opResult; 390 usb_device_request_setup_packet_t request; 391 usb_target_t target; 392 target.address = hub_info->usb_device->address; 393 target.endpoint = 0; 394 395 //get configuration descriptor 396 // this is not fully correct - there are more configurations 397 // and all should be checked 398 usb_standard_device_descriptor_t std_descriptor; 399 opResult = usb_drv_req_get_device_descriptor(hc, target.address, 400 &std_descriptor); 401 if(opResult!=EOK){ 402 printf("[usb_hub] could not get device descriptor, %d\n",opResult); 403 return 1;///\TODO some proper error code needed 404 } 405 printf("[usb_hub] hub has %d configurations\n",std_descriptor.configuration_count); 406 if(std_descriptor.configuration_count<1){ 407 printf("[usb_hub] THERE ARE NO CONFIGURATIONS AVAILABLE\n"); 408 } 409 usb_standard_configuration_descriptor_t config_descriptor; 410 opResult = usb_drv_req_get_bare_configuration_descriptor(hc, 411 target.address, 0, 412 &config_descriptor); 413 if(opResult!=EOK){ 414 printf("[usb_hub] could not get configuration descriptor, %d\n",opResult); 415 return 1;///\TODO some proper error code needed 416 } 417 //set configuration 418 request.request_type = 0; 419 request.request = USB_DEVREQ_SET_CONFIGURATION; 420 request.index=0; 421 request.length=0; 422 request.value_high=0; 423 request.value_low = config_descriptor.configuration_number; 424 opResult = usb_drv_sync_control_write(hc, target, &request, NULL, 0); 425 if (opResult != EOK) { 426 printf("[usb_hub]something went wrong when setting hub`s configuration, %d\n", opResult); 427 } 428 429 430 for (port = 1; port < hub_info->port_count+1; ++port) { 431 usb_hub_set_power_port_request(&request, port); 432 opResult = usb_drv_sync_control_write(hc, target, &request, NULL, 0); 433 printf("[usb_hub] powering port %d\n",port); 434 if (opResult != EOK) { 435 printf("[usb_hub]something went wrong when setting hub`s %dth port\n", port); 436 } 437 } 438 //ports powered, hub seems to be enabled 439 440 441 ipc_hangup(hc); 442 443 //add the hub to list 444 usb_lst_append(&usb_hub_list, hub_info); 445 printf("[usb_hub] hub info added to list\n"); 446 //(void)hub_info; 447 usb_hub_check_hub_changes(); 448 449 /// \TODO start the check loop, if not already started... 450 451 //this is just a test for port status bitmap type 452 usb_hub_test_port_status(); 453 454 printf("[usb_hub] hub dev added\n"); 455 printf("\taddress %d, has %d ports \n", 456 hub_info->usb_device->address, 457 hub_info->port_count); 458 printf("\tused configuration %d\n",config_descriptor.configuration_number); 459 460 return EOK; 461 //return ENOTSUP; 462 } 463 464 //********************************************* 465 // 466 // hub driver code, main loop 467 // 468 //********************************************* 469 470 /** 471 * reset the port with new device and reserve the default address 472 * @param hc 473 * @param port 474 * @param target 475 */ 476 static void usb_hub_init_add_device(int hc, uint16_t port, usb_target_t target) { 477 usb_device_request_setup_packet_t request; 478 int opResult; 479 printf("[usb_hub] some connection changed\n"); 480 //get default address 481 opResult = usb_drv_reserve_default_address(hc); 482 if (opResult != EOK) { 483 printf("[usb_hub] cannot assign default address, it is probably used\n"); 484 return; 485 } 486 //reset port 487 usb_hub_set_reset_port_request(&request, port); 488 opResult = usb_drv_sync_control_write( 489 hc, target, 490 &request, 491 NULL, 0 492 ); 493 if (opResult != EOK) { 494 //continue; 495 printf("[usb_hub] something went wrong when reseting a port\n"); 496 } 497 } 498 499 /** 500 * finalize adding new device after port reset 501 * @param hc 502 * @param port 503 * @param target 504 */ 505 static void usb_hub_finalize_add_device( usb_hub_info_t * hub, 506 int hc, uint16_t port, usb_target_t target) { 507 508 int opResult; 509 printf("[usb_hub] finalizing add device\n"); 510 opResult = usb_hub_clear_port_feature(hc, target.address, 511 port, USB_HUB_FEATURE_C_PORT_RESET); 512 if (opResult != EOK) { 513 goto release; 514 } 515 516 /* Request address at from host controller. */ 517 usb_address_t new_device_address = usb_drv_request_address(hc); 518 if (new_device_address < 0) { 519 printf("[usb_hub] failed to get free USB address\n"); 520 opResult = new_device_address; 521 goto release; 522 } 523 printf("[usb_hub] setting new address\n"); 524 opResult = usb_drv_req_set_address(hc, USB_ADDRESS_DEFAULT, 525 new_device_address); 526 527 if (opResult != EOK) { 528 printf("[usb_hub] could not set address for new device\n"); 529 goto release; 530 } 531 532 release: 533 printf("[usb_hub] releasing default address\n"); 534 usb_drv_release_default_address(hc); 535 if (opResult != EOK) { 536 return; 537 } 538 539 devman_handle_t child_handle; 540 opResult = usb_drv_register_child_in_devman(hc, hub->device, 541 new_device_address, &child_handle); 542 if (opResult != EOK) { 543 printf("[usb_hub] could not start driver for new device \n"); 544 return; 545 } 546 hub->attached_devs[port].devman_handle = child_handle; 547 hub->attached_devs[port].address = new_device_address; 548 549 opResult = usb_drv_bind_address(hc, new_device_address, child_handle); 550 if (opResult != EOK) { 551 printf("[usb_hub] could not assign address of device in hcd \n"); 552 return; 553 } 554 printf("[usb_hub] new device address %d, handle %zu\n", 555 new_device_address, child_handle); 556 557 } 558 559 /** 560 * unregister device address in hc, close the port 561 * @param hc 562 * @param port 563 * @param target 564 */ 565 static void usb_hub_removed_device( 566 usb_hub_info_t * hub, int hc, uint16_t port, usb_target_t target) { 567 //usb_device_request_setup_packet_t request; 568 int opResult; 569 //disable port 570 /*usb_hub_set_disable_port_request(&request, port); 571 opResult = usb_drv_sync_control_write( 572 hc, target, 573 &request, 574 NULL, 0 575 ); 576 if (opResult != EOK) { 577 //continue; 578 printf("[usb_hub] something went wrong when disabling a port\n"); 579 }*/ 580 /// \TODO remove device 581 582 hub->attached_devs[port].devman_handle=0; 583 //close address 584 if(hub->attached_devs[port].address!=0){ 585 opResult = usb_drv_release_address(hc,hub->attached_devs[port].address); 586 if(opResult != EOK) { 587 printf("[usb_hub] could not release address of removed device: %d\n",opResult); 588 } 589 hub->attached_devs[port].address = 0; 590 }else{ 591 printf("[usb_hub] this is strange, disconnected device had no address\n"); 592 //device was disconnected before it`s port was reset - return default address 593 usb_drv_release_default_address(hc); 594 } 595 } 596 597 /** 598 * process interrupts on given hub port 599 * @param hc 600 * @param port 601 * @param target 602 */ 603 static void usb_hub_process_interrupt(usb_hub_info_t * hub, int hc, 604 uint16_t port, usb_address_t address) { 605 printf("[usb_hub] interrupt at port %d\n", port); 606 //determine type of change 607 usb_target_t target; 608 target.address=address; 609 target.endpoint=0; 610 usb_port_status_t status; 611 size_t rcvd_size; 612 usb_device_request_setup_packet_t request; 613 int opResult; 614 usb_hub_set_port_status_request(&request, port); 615 //endpoint 0 616 617 opResult = usb_drv_sync_control_read( 618 hc, target, 619 &request, 620 &status, 4, &rcvd_size 621 ); 622 if (opResult != EOK) { 623 printf("[usb_hub] ERROR: could not get port status\n"); 624 return; 625 } 626 if (rcvd_size != sizeof (usb_port_status_t)) { 627 printf("[usb_hub] ERROR: received status has incorrect size\n"); 628 return; 629 } 630 //something connected/disconnected 631 if (usb_port_connect_change(&status)) { 632 opResult = usb_hub_clear_port_feature(hc, target.address, 633 port, USB_HUB_FEATURE_C_PORT_CONNECTION); 634 // TODO: check opResult 635 if (usb_port_dev_connected(&status)) { 636 printf("[usb_hub] some connection changed\n"); 637 usb_hub_init_add_device(hc, port, target); 638 } else { 639 usb_hub_removed_device(hub, hc, port, target); 640 } 641 } 642 //port reset 643 if (usb_port_reset_completed(&status)) { 644 printf("[usb_hub] port reset complete\n"); 645 if (usb_port_enabled(&status)) { 646 usb_hub_finalize_add_device(hub, hc, port, target); 647 } else { 648 printf("[usb_hub] ERROR: port reset, but port still not enabled\n"); 649 } 650 } 651 652 usb_port_set_connect_change(&status, false); 653 usb_port_set_reset(&status, false); 654 usb_port_set_reset_completed(&status, false); 655 usb_port_set_dev_connected(&status, false); 656 if (status) { 657 printf("[usb_hub]there was some unsupported change on port %d\n",port); 658 } 659 /// \TODO handle other changes 660 /// \TODO debug log for various situations 661 662 663 664 /* 665 //configure device 666 usb_drv_reserve_default_address(hc); 667 668 usb_address_t new_device_address = usb_drv_request_address(hc); 669 670 671 usb_drv_release_default_address(hc); 672 * */ 673 } 674 675 /** Check changes on all known hubs. 676 */ 677 void usb_hub_check_hub_changes(void) { 678 /* 679 * Iterate through all hubs. 680 */ 681 usb_general_list_t * lst_item; 682 for (lst_item = usb_hub_list.next; 683 lst_item != &usb_hub_list; 684 lst_item = lst_item->next) { 685 usb_hub_info_t * hub_info = ((usb_hub_info_t*)lst_item->data); 686 /* 687 * Check status change pipe of this hub. 688 */ 689 690 usb_target_t target; 691 target.address = hub_info->usb_device->address; 692 target.endpoint = 1;/// \TODO get from endpoint descriptor 693 printf("[usb_hub] checking changes for hub at addr %d\n", 694 target.address); 695 696 size_t port_count = hub_info->port_count; 697 698 /* 699 * Connect to respective HC. 700 */ 701 int hc = usb_drv_hc_connect(hub_info->device, 0); 702 if (hc < 0) { 703 continue; 704 } 705 706 // FIXME: count properly 707 size_t byte_length = ((port_count+1) / 8) + 1; 708 709 void *change_bitmap = malloc(byte_length); 710 size_t actual_size; 711 usb_handle_t handle; 712 713 /* 714 * Send the request. 715 */ 716 int opResult = usb_drv_async_interrupt_in(hc, target, 717 change_bitmap, byte_length, &actual_size, 718 &handle); 719 720 usb_drv_async_wait_for(handle); 721 722 if (opResult != EOK) { 723 printf("[usb_hub] something went wrong while getting status of hub\n"); 724 continue; 725 } 726 unsigned int port; 727 for (port = 1; port < port_count+1; ++port) { 728 bool interrupt = (((uint8_t*) change_bitmap)[port / 8] >> (port % 8)) % 2; 729 if (interrupt) { 730 usb_hub_process_interrupt( 731 hub_info, hc, port, hub_info->usb_device->address); 732 } 733 } 734 735 736 /* 737 * TODO: handle the changes. 738 */ 739 740 /* 741 * WARNING: sample code, will not work out of the box. 742 * And does not contain code for checking for errors. 743 */ 744 #if 0 745 /* 746 * Before opening the port, we must acquire the default 747 * address. 748 */ 749 usb_drv_reserve_default_address(hc); 750 751 usb_address_t new_device_address = usb_drv_request_address(hc); 752 753 // TODO: open the port 754 755 // TODO: send request for setting address to new_device_address 756 757 /* 758 * Once new address is set, we can release the default 759 * address. 760 */ 761 usb_drv_release_default_address(hc); 762 763 /* 764 * Obtain descriptors and create match ids for devman. 765 */ 766 767 // TODO: get device descriptors 768 769 // TODO: create match ids 770 771 // TODO: add child device 772 773 // child_device_register sets the device handle 774 // TODO: store it here 775 devman_handle_t new_device_handle = 0; 776 777 /* 778 * Inform the HC that the new device has devman handle 779 * assigned. 780 */ 781 usb_drv_bind_address(hc, new_device_address, new_device_handle); 782 783 /* 784 * That's all. 785 */ 786 #endif 787 788 789 /* 790 * Hang-up the HC-connected phone. 791 */ 792 ipc_hangup(hc); 793 } 794 } 256 } 257 */ 258 795 259 796 260 /**
Note:
See TracChangeset
for help on using the changeset viewer.