Index: uspace/lib/c/Makefile =================================================================== --- uspace/lib/c/Makefile (revision 26c03dbdf129d84bd2eab547247da016fe47f30d) +++ uspace/lib/c/Makefile (revision 7858acbf41d53b9ad6dcaf06f30f37ba260f89f8) @@ -72,5 +72,4 @@ generic/device/clock_dev.c \ generic/device/graph_dev.c \ - generic/device/nic.c \ generic/dhcp.c \ generic/dnsr.c \ Index: pace/lib/c/generic/device/nic.c =================================================================== --- uspace/lib/c/generic/device/nic.c (revision 26c03dbdf129d84bd2eab547247da016fe47f30d) +++ (revision ) @@ -1,1292 +1,0 @@ -/* - * Copyright (c) 2011 Radim Vansa - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * - Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -/** @addtogroup libc - * @{ - */ -/** - * @file - * @brief Client-side RPC stubs for DDF NIC - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/** Send frame from NIC - * - * @param[in] dev_sess - * @param[in] data Frame data - * @param[in] size Frame size in bytes - * - * @return EOK If the operation was successfully completed - * - */ -int nic_send_frame(async_sess_t *dev_sess, void *data, size_t size) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - - ipc_call_t answer; - aid_t req = async_send_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_SEND_MESSAGE, &answer); - sysarg_t retval = async_data_write_start(exch, data, size); - - async_exchange_end(exch); - - if (retval != EOK) { - async_forget(req); - return retval; - } - - async_wait_for(req, &retval); - return retval; -} - -/** Create callback connection from NIC service - * - * @param[in] dev_sess - * @param[in] device_id - * - * @return EOK If the operation was successfully completed - * - */ -int nic_callback_create(async_sess_t *dev_sess, async_client_conn_t cfun, - void *carg) -{ - ipc_call_t answer; - int rc; - sysarg_t retval; - - async_exch_t *exch = async_exchange_begin(dev_sess); - aid_t req = async_send_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_CALLBACK_CREATE, &answer); - - rc = async_connect_to_me(exch, 0, 0, 0, cfun, carg); - if (rc != EOK) { - async_forget(req); - return rc; - } - async_exchange_end(exch); - - async_wait_for(req, &retval); - return (int) retval; -} - -/** Get the current state of the device - * - * @param[in] dev_sess - * @param[out] state Current state - * - * @return EOK If the operation was successfully completed - * - */ -int nic_get_state(async_sess_t *dev_sess, nic_device_state_t *state) -{ - assert(state); - - sysarg_t _state; - - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_1_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_GET_STATE, &_state); - async_exchange_end(exch); - - *state = (nic_device_state_t) _state; - - return rc; -} - -/** Request the device to change its state - * - * @param[in] dev_sess - * @param[in] state New state - * - * @return EOK If the operation was successfully completed - * - */ -int nic_set_state(async_sess_t *dev_sess, nic_device_state_t state) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_2_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_SET_STATE, state); - async_exchange_end(exch); - - return rc; -} - -/** Request the MAC address of the device - * - * @param[in] dev_sess - * @param[out] address Structure with buffer for the address - * - * @return EOK If the operation was successfully completed - * - */ -int nic_get_address(async_sess_t *dev_sess, nic_address_t *address) -{ - assert(address); - - async_exch_t *exch = async_exchange_begin(dev_sess); - aid_t aid = async_send_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_GET_ADDRESS, NULL); - int rc = async_data_read_start(exch, address, sizeof(nic_address_t)); - async_exchange_end(exch); - - sysarg_t res; - async_wait_for(aid, &res); - - if (rc != EOK) - return rc; - - return (int) res; -} - -/** Set the address of the device (e.g. MAC on Ethernet) - * - * @param[in] dev_sess - * @param[in] address Pointer to the address - * - * @return EOK If the operation was successfully completed - * - */ -int nic_set_address(async_sess_t *dev_sess, const nic_address_t *address) -{ - assert(address); - - async_exch_t *exch = async_exchange_begin(dev_sess); - aid_t aid = async_send_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_SET_ADDRESS, NULL); - int rc = async_data_write_start(exch, address, sizeof(nic_address_t)); - async_exchange_end(exch); - - sysarg_t res; - async_wait_for(aid, &res); - - if (rc != EOK) - return rc; - - return (int) res; -} - -/** Request statistic data about NIC operation. - * - * @param[in] dev_sess - * @param[out] stats Structure with the statistics - * - * @return EOK If the operation was successfully completed - * - */ -int nic_get_stats(async_sess_t *dev_sess, nic_device_stats_t *stats) -{ - assert(stats); - - async_exch_t *exch = async_exchange_begin(dev_sess); - - int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_GET_STATS); - if (rc != EOK) { - async_exchange_end(exch); - return rc; - } - - rc = async_data_read_start(exch, stats, sizeof(nic_device_stats_t)); - - async_exchange_end(exch); - - return rc; -} - -/** Request information about the device. - * - * @see nic_device_info_t - * - * @param[in] dev_sess - * @param[out] device_info Information about the device - * - * @return EOK If the operation was successfully completed - * - */ -int nic_get_device_info(async_sess_t *dev_sess, nic_device_info_t *device_info) -{ - assert(device_info); - - async_exch_t *exch = async_exchange_begin(dev_sess); - - int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_GET_DEVICE_INFO); - if (rc != EOK) { - async_exchange_end(exch); - return rc; - } - - rc = async_data_read_start(exch, device_info, sizeof(nic_device_info_t)); - - async_exchange_end(exch); - - return rc; -} - -/** Request status of the cable (plugged/unplugged) - * - * @param[in] dev_sess - * @param[out] cable_state Current cable state - * - * @return EOK If the operation was successfully completed - * - */ -int nic_get_cable_state(async_sess_t *dev_sess, nic_cable_state_t *cable_state) -{ - assert(cable_state); - - sysarg_t _cable_state; - - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_1_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_GET_CABLE_STATE, &_cable_state); - async_exchange_end(exch); - - *cable_state = (nic_cable_state_t) _cable_state; - - return rc; -} - -/** Request current operation mode. - * - * @param[in] dev_sess - * @param[out] speed Current operation speed in Mbps. Can be NULL. - * @param[out] duplex Full duplex/half duplex. Can be NULL. - * @param[out] role Master/slave/auto. Can be NULL. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_get_operation_mode(async_sess_t *dev_sess, int *speed, - nic_channel_mode_t *duplex, nic_role_t *role) -{ - sysarg_t _speed; - sysarg_t _duplex; - sysarg_t _role; - - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_1_3(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_GET_OPERATION_MODE, &_speed, &_duplex, &_role); - async_exchange_end(exch); - - if (speed) - *speed = (int) _speed; - - if (duplex) - *duplex = (nic_channel_mode_t) _duplex; - - if (role) - *role = (nic_role_t) _role; - - return rc; -} - -/** Set current operation mode. - * - * If the NIC has auto-negotiation enabled, this command - * disables auto-negotiation and sets the operation mode. - * - * @param[in] dev_sess - * @param[in] speed Operation speed in Mbps - * @param[in] duplex Full duplex/half duplex - * @param[in] role Master/slave/auto (e.g. in Gbit Ethernet] - * - * @return EOK If the operation was successfully completed - * - */ -int nic_set_operation_mode(async_sess_t *dev_sess, int speed, - nic_channel_mode_t duplex, nic_role_t role) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_4_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_SET_OPERATION_MODE, (sysarg_t) speed, (sysarg_t) duplex, - (sysarg_t) role); - async_exchange_end(exch); - - return rc; -} - -/** Enable auto-negotiation. - * - * The advertisement argument can only limit some modes, - * it can never force the NIC to advertise unsupported modes. - * - * The allowed modes are defined in "nic/eth_phys.h" in the C library. - * - * @param[in] dev_sess - * @param[in] advertisement Allowed advertised modes. Use 0 for all modes. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_autoneg_enable(async_sess_t *dev_sess, uint32_t advertisement) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_2_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_AUTONEG_ENABLE, (sysarg_t) advertisement); - async_exchange_end(exch); - - return rc; -} - -/** Disable auto-negotiation. - * - * @param[in] dev_sess - * - * @return EOK If the operation was successfully completed - * - */ -int nic_autoneg_disable(async_sess_t *dev_sess) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_AUTONEG_DISABLE); - async_exchange_end(exch); - - return rc; -} - -/** Probe current state of auto-negotiation. - * - * Modes are defined in the "nic/eth_phys.h" in the C library. - * - * @param[in] dev_sess - * @param[out] our_advertisement Modes advertised by this NIC. - * Can be NULL. - * @param[out] their_advertisement Modes advertised by the other side. - * Can be NULL. - * @param[out] result General state of auto-negotiation. - * Can be NULL. - * @param[out] their_result State of other side auto-negotiation. - * Can be NULL. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_autoneg_probe(async_sess_t *dev_sess, uint32_t *our_advertisement, - uint32_t *their_advertisement, nic_result_t *result, - nic_result_t *their_result) -{ - sysarg_t _our_advertisement; - sysarg_t _their_advertisement; - sysarg_t _result; - sysarg_t _their_result; - - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_1_4(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_AUTONEG_PROBE, &_our_advertisement, &_their_advertisement, - &_result, &_their_result); - async_exchange_end(exch); - - if (our_advertisement) - *our_advertisement = (uint32_t) _our_advertisement; - - if (*their_advertisement) - *their_advertisement = (uint32_t) _their_advertisement; - - if (result) - *result = (nic_result_t) _result; - - if (their_result) - *their_result = (nic_result_t) _their_result; - - return rc; -} - -/** Restart the auto-negotiation process. - * - * @param[in] dev_sess - * - * @return EOK If the operation was successfully completed - * - */ -int nic_autoneg_restart(async_sess_t *dev_sess) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_AUTONEG_RESTART); - async_exchange_end(exch); - - return rc; -} - -/** Query party's sending and reception of the PAUSE frame. - * - * @param[in] dev_sess - * @param[out] we_send This NIC sends the PAUSE frame (true/false) - * @param[out] we_receive This NIC receives the PAUSE frame (true/false) - * @param[out] pause The time set to transmitted PAUSE frames. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_get_pause(async_sess_t *dev_sess, nic_result_t *we_send, - nic_result_t *we_receive, uint16_t *pause) -{ - sysarg_t _we_send; - sysarg_t _we_receive; - sysarg_t _pause; - - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_1_3(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_GET_PAUSE, &_we_send, &_we_receive, &_pause); - async_exchange_end(exch); - - if (we_send) - *we_send = _we_send; - - if (we_receive) - *we_receive = _we_receive; - - if (pause) - *pause = _pause; - - return rc; -} - -/** Control sending and reception of the PAUSE frame. - * - * @param[in] dev_sess - * @param[in] allow_send Allow sending the PAUSE frame (true/false) - * @param[in] allow_receive Allow reception of the PAUSE frame (true/false) - * @param[in] pause Pause length in 512 bit units written - * to transmitted frames. The value 0 means - * auto value (the best). If the requested - * time cannot be set the driver is allowed - * to set the nearest supported value. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_set_pause(async_sess_t *dev_sess, int allow_send, int allow_receive, - uint16_t pause) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_4_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_SET_PAUSE, allow_send, allow_receive, pause); - async_exchange_end(exch); - - return rc; -} - -/** Retrieve current settings of unicast frames reception. - * - * Note: In case of mode != NIC_UNICAST_LIST the contents of - * address_list and address_count are undefined. - * - * @param[in] dev_sess - * @param[out] mode Current operation mode - * @param[in] max_count Maximal number of addresses that could - * be written into the list buffer. - * @param[out] address_list Buffer for the list (array). Can be NULL. - * @param[out] address_count Number of addresses in the list before - * possible truncation due to the max_count. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_unicast_get_mode(async_sess_t *dev_sess, nic_unicast_mode_t *mode, - size_t max_count, nic_address_t *address_list, size_t *address_count) -{ - assert(mode); - - sysarg_t _mode; - sysarg_t _address_count; - - if (!address_list) - max_count = 0; - - async_exch_t *exch = async_exchange_begin(dev_sess); - - int rc = async_req_2_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_UNICAST_GET_MODE, max_count, &_mode, &_address_count); - if (rc != EOK) { - async_exchange_end(exch); - return rc; - } - - *mode = (nic_unicast_mode_t) _mode; - if (address_count) - *address_count = (size_t) _address_count; - - if ((max_count) && (_address_count)) - rc = async_data_read_start(exch, address_list, - max_count * sizeof(nic_address_t)); - - async_exchange_end(exch); - - return rc; -} - -/** Set which unicast frames are received. - * - * @param[in] dev_sess - * @param[in] mode Current operation mode - * @param[in] address_list The list of addresses. Can be NULL. - * @param[in] address_count Number of addresses in the list. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_unicast_set_mode(async_sess_t *dev_sess, nic_unicast_mode_t mode, - const nic_address_t *address_list, size_t address_count) -{ - if (address_list == NULL) - address_count = 0; - - async_exch_t *exch = async_exchange_begin(dev_sess); - - aid_t message_id = async_send_3(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_UNICAST_SET_MODE, (sysarg_t) mode, address_count, NULL); - - int rc; - if (address_count) - rc = async_data_write_start(exch, address_list, - address_count * sizeof(nic_address_t)); - else - rc = EOK; - - async_exchange_end(exch); - - sysarg_t res; - async_wait_for(message_id, &res); - - if (rc != EOK) - return rc; - - return (int) res; -} - -/** Retrieve current settings of multicast frames reception. - * - * Note: In case of mode != NIC_MULTICAST_LIST the contents of - * address_list and address_count are undefined. - * - * @param[in] dev_sess - * @param[out] mode Current operation mode - * @param[in] max_count Maximal number of addresses that could - * be written into the list buffer. - * @param[out] address_list Buffer for the list (array). Can be NULL. - * @param[out] address_count Number of addresses in the list before - * possible truncation due to the max_count. - * Can be NULL. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_multicast_get_mode(async_sess_t *dev_sess, nic_multicast_mode_t *mode, - size_t max_count, nic_address_t *address_list, size_t *address_count) -{ - assert(mode); - - sysarg_t _mode; - - if (!address_list) - max_count = 0; - - async_exch_t *exch = async_exchange_begin(dev_sess); - - sysarg_t ac; - int rc = async_req_2_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_MULTICAST_GET_MODE, max_count, &_mode, &ac); - if (rc != EOK) { - async_exchange_end(exch); - return rc; - } - - *mode = (nic_multicast_mode_t) _mode; - if (address_count) - *address_count = (size_t) ac; - - if ((max_count) && (ac)) - rc = async_data_read_start(exch, address_list, - max_count * sizeof(nic_address_t)); - - async_exchange_end(exch); - return rc; -} - -/** Set which multicast frames are received. - * - * @param[in] dev_sess - * @param[in] mode Current operation mode - * @param[in] address_list The list of addresses. Can be NULL. - * @param[in] address_count Number of addresses in the list. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_multicast_set_mode(async_sess_t *dev_sess, nic_multicast_mode_t mode, - const nic_address_t *address_list, size_t address_count) -{ - if (address_list == NULL) - address_count = 0; - - async_exch_t *exch = async_exchange_begin(dev_sess); - - aid_t message_id = async_send_3(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_MULTICAST_SET_MODE, (sysarg_t) mode, address_count, NULL); - - int rc; - if (address_count) - rc = async_data_write_start(exch, address_list, - address_count * sizeof(nic_address_t)); - else - rc = EOK; - - async_exchange_end(exch); - - sysarg_t res; - async_wait_for(message_id, &res); - - if (rc != EOK) - return rc; - - return (int) res; -} - -/** Determine if broadcast packets are received. - * - * @param[in] dev_sess - * @param[out] mode Current operation mode - * - * @return EOK If the operation was successfully completed - * - */ -int nic_broadcast_get_mode(async_sess_t *dev_sess, nic_broadcast_mode_t *mode) -{ - assert(mode); - - sysarg_t _mode; - - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_1_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_BROADCAST_GET_MODE, &_mode); - async_exchange_end(exch); - - *mode = (nic_broadcast_mode_t) _mode; - - return rc; -} - -/** Set whether broadcast packets are received. - * - * @param[in] dev_sess - * @param[in] mode Current operation mode - * - * @return EOK If the operation was successfully completed - * - */ -int nic_broadcast_set_mode(async_sess_t *dev_sess, nic_broadcast_mode_t mode) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_2_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_BROADCAST_SET_MODE, mode); - async_exchange_end(exch); - - return rc; -} - -/** Determine if defective (erroneous) packets are received. - * - * @param[in] dev_sess - * @param[out] mode Bitmask specifying allowed errors - * - * @return EOK If the operation was successfully completed - * - */ -int nic_defective_get_mode(async_sess_t *dev_sess, uint32_t *mode) -{ - assert(mode); - - sysarg_t _mode; - - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_1_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_DEFECTIVE_GET_MODE, &_mode); - async_exchange_end(exch); - - *mode = (uint32_t) _mode; - - return rc; -} - -/** Set whether defective (erroneous) packets are received. - * - * @param[in] dev_sess - * @param[out] mode Bitmask specifying allowed errors - * - * @return EOK If the operation was successfully completed - * - */ -int nic_defective_set_mode(async_sess_t *dev_sess, uint32_t mode) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_2_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_DEFECTIVE_SET_MODE, mode); - async_exchange_end(exch); - - return rc; -} - -/** Retrieve the currently blocked source MAC addresses. - * - * @param[in] dev_sess - * @param[in] max_count Maximal number of addresses that could - * be written into the list buffer. - * @param[out] address_list Buffer for the list (array). Can be NULL. - * @param[out] address_count Number of addresses in the list before - * possible truncation due to the max_count. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_blocked_sources_get(async_sess_t *dev_sess, size_t max_count, - nic_address_t *address_list, size_t *address_count) -{ - if (!address_list) - max_count = 0; - - async_exch_t *exch = async_exchange_begin(dev_sess); - - sysarg_t ac; - int rc = async_req_2_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_BLOCKED_SOURCES_GET, max_count, &ac); - if (rc != EOK) { - async_exchange_end(exch); - return rc; - } - - if (address_count) - *address_count = (size_t) ac; - - if ((max_count) && (ac)) - rc = async_data_read_start(exch, address_list, - max_count * sizeof(nic_address_t)); - - async_exchange_end(exch); - return rc; -} - -/** Set which source MACs are blocked - * - * @param[in] dev_sess - * @param[in] address_list The list of addresses. Can be NULL. - * @param[in] address_count Number of addresses in the list. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_blocked_sources_set(async_sess_t *dev_sess, - const nic_address_t *address_list, size_t address_count) -{ - if (address_list == NULL) - address_count = 0; - - async_exch_t *exch = async_exchange_begin(dev_sess); - - aid_t message_id = async_send_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_BLOCKED_SOURCES_SET, address_count, NULL); - - int rc; - if (address_count) - rc = async_data_write_start(exch, address_list, - address_count * sizeof(nic_address_t)); - else - rc = EOK; - - async_exchange_end(exch); - - sysarg_t res; - async_wait_for(message_id, &res); - - if (rc != EOK) - return rc; - - return (int) res; -} - -/** Request current VLAN filtering mask. - * - * @param[in] dev_sess - * @param[out] stats Structure with the statistics - * - * @return EOK If the operation was successfully completed - * - */ -int nic_vlan_get_mask(async_sess_t *dev_sess, nic_vlan_mask_t *mask) -{ - assert(mask); - - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_VLAN_GET_MASK); - if (rc != EOK) { - async_exchange_end(exch); - return rc; - } - - rc = async_data_read_start(exch, mask, sizeof(nic_vlan_mask_t)); - async_exchange_end(exch); - - return rc; -} - -/** Set the mask used for VLAN filtering. - * - * If NULL, VLAN filtering is disabled. - * - * @param[in] dev_sess - * @param[in] mask Pointer to mask structure or NULL to disable. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_vlan_set_mask(async_sess_t *dev_sess, const nic_vlan_mask_t *mask) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - - aid_t message_id = async_send_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_VLAN_SET_MASK, mask != NULL, NULL); - - int rc; - if (mask != NULL) - rc = async_data_write_start(exch, mask, sizeof(nic_vlan_mask_t)); - else - rc = EOK; - - async_exchange_end(exch); - - sysarg_t res; - async_wait_for(message_id, &res); - - if (rc != EOK) - return rc; - - return (int) res; -} - -/** Set VLAN (802.1q) tag. - * - * Set whether the tag is to be signaled in offload info and - * if the tag should be stripped from received frames and added - * to sent frames automatically. Not every combination of add - * and strip must be supported. - * - * @param[in] dev_sess - * @param[in] tag VLAN priority (top 3 bits) and - * the VLAN tag (bottom 12 bits) - * @param[in] add Add the VLAN tag automatically (boolean) - * @param[in] strip Strip the VLAN tag automatically (boolean) - * - * @return EOK If the operation was successfully completed - * - */ -int nic_vlan_set_tag(async_sess_t *dev_sess, uint16_t tag, bool add, bool strip) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_4_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_VLAN_SET_TAG, (sysarg_t) tag, (sysarg_t) add, (sysarg_t) strip); - async_exchange_end(exch); - - return rc; -} - -/** Add new Wake-On-LAN virtue. - * - * @param[in] dev_sess - * @param[in] type Type of the virtue - * @param[in] data Data required for this virtue - * (depends on type) - * @param[in] length Length of the data - * @param[out] id Identifier of the new virtue - * - * @return EOK If the operation was successfully completed - * - */ -int nic_wol_virtue_add(async_sess_t *dev_sess, nic_wv_type_t type, - const void *data, size_t length, nic_wv_id_t *id) -{ - assert(id); - - bool send_data = ((data != NULL) && (length != 0)); - async_exch_t *exch = async_exchange_begin(dev_sess); - - ipc_call_t result; - aid_t message_id = async_send_3(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_WOL_VIRTUE_ADD, (sysarg_t) type, send_data, &result); - - sysarg_t res; - if (send_data) { - int rc = async_data_write_start(exch, data, length); - if (rc != EOK) { - async_exchange_end(exch); - async_wait_for(message_id, &res); - return rc; - } - } - - async_exchange_end(exch); - async_wait_for(message_id, &res); - - *id = IPC_GET_ARG1(result); - return (int) res; -} - -/** Remove Wake-On-LAN virtue. - * - * @param[in] dev_sess - * @param[in] id Virtue identifier - * - * @return EOK If the operation was successfully completed - * - */ -int nic_wol_virtue_remove(async_sess_t *dev_sess, nic_wv_id_t id) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_2_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_WOL_VIRTUE_REMOVE, (sysarg_t) id); - async_exchange_end(exch); - - return rc; -} - -/** Get information about virtue. - * - * @param[in] dev_sess - * @param[in] id Virtue identifier - * @param[out] type Type of the filter. Can be NULL. - * @param[out] max_length Size of the data buffer. - * @param[out] data Buffer for data used when the - * virtue was created. Can be NULL. - * @param[out] length Length of the data. Can be NULL. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_wol_virtue_probe(async_sess_t *dev_sess, nic_wv_id_t id, - nic_wv_type_t *type, size_t max_length, void *data, size_t *length) -{ - sysarg_t _type; - sysarg_t _length; - - if (data == NULL) - max_length = 0; - - async_exch_t *exch = async_exchange_begin(dev_sess); - - int rc = async_req_3_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_WOL_VIRTUE_PROBE, (sysarg_t) id, max_length, - &_type, &_length); - if (rc != EOK) { - async_exchange_end(exch); - return rc; - } - - if (type) - *type = _type; - - if (length) - *length = _length; - - if ((max_length) && (_length != 0)) - rc = async_data_read_start(exch, data, max_length); - - async_exchange_end(exch); - return rc; -} - -/** Get a list of all virtues of the specified type. - * - * When NIC_WV_NONE is specified as the virtue type the function - * lists virtues of all types. - * - * @param[in] dev_sess - * @param[in] type Type of the virtues - * @param[in] max_count Maximum number of ids that can be - * written into the list buffer. - * @param[out] id_list Buffer for to the list of virtue ids. - * Can be NULL. - * @param[out] id_count Number of virtue identifiers in the list - * before possible truncation due to the - * max_count. Can be NULL. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_wol_virtue_list(async_sess_t *dev_sess, nic_wv_type_t type, - size_t max_count, nic_wv_id_t *id_list, size_t *id_count) -{ - if (id_list == NULL) - max_count = 0; - - async_exch_t *exch = async_exchange_begin(dev_sess); - - sysarg_t count; - int rc = async_req_3_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_WOL_VIRTUE_LIST, (sysarg_t) type, max_count, &count); - - if (id_count) - *id_count = (size_t) count; - - if ((rc != EOK) || (!max_count)) { - async_exchange_end(exch); - return rc; - } - - rc = async_data_read_start(exch, id_list, - max_count * sizeof(nic_wv_id_t)); - - async_exchange_end(exch); - return rc; -} - -/** Get number of virtues that can be enabled yet. - * - * Count: < 0 => Virtue of this type can be never used - * = 0 => No more virtues can be enabled - * > 0 => #count virtues can be enabled yet - * - * @param[in] dev_sess - * @param[in] type Virtue type - * @param[out] count Number of virtues - * - * @return EOK If the operation was successfully completed - * - */ -int nic_wol_virtue_get_caps(async_sess_t *dev_sess, nic_wv_type_t type, - int *count) -{ - assert(count); - - sysarg_t _count; - - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_2_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_WOL_VIRTUE_GET_CAPS, (sysarg_t) type, &_count); - async_exchange_end(exch); - - *count = (int) _count; - return rc; -} - -/** Load the frame that issued the wakeup. - * - * The NIC can support only matched_type, only part of the frame - * can be available or not at all. Sometimes even the type can be - * uncertain -- in this case the matched_type contains NIC_WV_NONE. - * - * Frame_length can be greater than max_length, but at most max_length - * bytes will be copied into the frame buffer. - * - * Note: Only the type of the filter can be detected, not the concrete - * filter, because the driver is probably not running when the wakeup - * is issued. - * - * @param[in] dev_sess - * @param[out] matched_type Type of the filter that issued wakeup. - * @param[in] max_length Size of the buffer - * @param[out] frame Buffer for the frame. Can be NULL. - * @param[out] frame_length Length of the stored frame. Can be NULL. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_wol_load_info(async_sess_t *dev_sess, nic_wv_type_t *matched_type, - size_t max_length, uint8_t *frame, size_t *frame_length) -{ - assert(matched_type); - - sysarg_t _matched_type; - sysarg_t _frame_length; - - if (frame == NULL) - max_length = 0; - - async_exch_t *exch = async_exchange_begin(dev_sess); - - int rc = async_req_2_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_WOL_LOAD_INFO, max_length, &_matched_type, &_frame_length); - if (rc != EOK) { - async_exchange_end(exch); - return rc; - } - - *matched_type = (nic_wv_type_t) _matched_type; - if (frame_length) - *frame_length = (size_t) _frame_length; - - if ((max_length != 0) && (_frame_length != 0)) - rc = async_data_read_start(exch, frame, max_length); - - async_exchange_end(exch); - return rc; -} - -/** Probe supported options and current setting of offload computations - * - * @param[in] dev_sess - * @param[out] supported Supported offload options - * @param[out] active Currently active offload options - * - * @return EOK If the operation was successfully completed - * - */ -int nic_offload_probe(async_sess_t *dev_sess, uint32_t *supported, - uint32_t *active) -{ - assert(supported); - assert(active); - - sysarg_t _supported; - sysarg_t _active; - - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_1_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_OFFLOAD_PROBE, &_supported, &_active); - async_exchange_end(exch); - - *supported = (uint32_t) _supported; - *active = (uint32_t) _active; - return rc; -} - -/** Set which offload computations can be performed on the NIC. - * - * @param[in] dev_sess - * @param[in] mask Mask for the options (only those set here will be set) - * @param[in] active Which options should be enabled and which disabled - * - * @return EOK If the operation was successfully completed - * - */ -int nic_offload_set(async_sess_t *dev_sess, uint32_t mask, uint32_t active) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_3_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_AUTONEG_RESTART, (sysarg_t) mask, (sysarg_t) active); - async_exchange_end(exch); - - return rc; -} - -/** Query the current interrupt/poll mode of the NIC - * - * @param[in] dev_sess - * @param[out] mode Current poll mode - * @param[out] period Period used in periodic polling. - * Can be NULL. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_poll_get_mode(async_sess_t *dev_sess, nic_poll_mode_t *mode, - struct timeval *period) -{ - assert(mode); - - sysarg_t _mode; - - async_exch_t *exch = async_exchange_begin(dev_sess); - - int rc = async_req_2_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_POLL_GET_MODE, period != NULL, &_mode); - if (rc != EOK) { - async_exchange_end(exch); - return rc; - } - - *mode = (nic_poll_mode_t) _mode; - - if (period != NULL) - rc = async_data_read_start(exch, period, sizeof(struct timeval)); - - async_exchange_end(exch); - return rc; -} - -/** Set the interrupt/poll mode of the NIC. - * - * @param[in] dev_sess - * @param[in] mode New poll mode - * @param[in] period Period used in periodic polling. Can be NULL. - * - * @return EOK If the operation was successfully completed - * - */ -int nic_poll_set_mode(async_sess_t *dev_sess, nic_poll_mode_t mode, - const struct timeval *period) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - - aid_t message_id = async_send_3(exch, DEV_IFACE_ID(NIC_DEV_IFACE), - NIC_POLL_SET_MODE, (sysarg_t) mode, period != NULL, NULL); - - int rc; - if (period) - rc = async_data_write_start(exch, period, sizeof(struct timeval)); - else - rc = EOK; - - async_exchange_end(exch); - - sysarg_t res; - async_wait_for(message_id, &res); - - if (rc != EOK) - return rc; - - return (int) res; -} - -/** Request the driver to poll the NIC. - * - * @param[in] dev_sess - * - * @return EOK If the operation was successfully completed - * - */ -int nic_poll_now(async_sess_t *dev_sess) -{ - async_exch_t *exch = async_exchange_begin(dev_sess); - int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), NIC_POLL_NOW); - async_exchange_end(exch); - - return rc; -} - -/** @} - */ Index: pace/lib/c/include/device/nic.h =================================================================== --- uspace/lib/c/include/device/nic.h (revision 26c03dbdf129d84bd2eab547247da016fe47f30d) +++ (revision ) @@ -1,159 +1,0 @@ -/* - * Copyright (c) 2010 Radim Vansa - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * - Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * - The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES - * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - - /** @addtogroup libc - * @{ - */ -/** @file - */ - -#ifndef LIBC_DEVICE_NIC_H_ -#define LIBC_DEVICE_NIC_H_ - -#include -#include -#include - -typedef enum { - NIC_SEND_MESSAGE = 0, - NIC_CALLBACK_CREATE, - NIC_GET_STATE, - NIC_SET_STATE, - NIC_GET_ADDRESS, - NIC_SET_ADDRESS, - NIC_GET_STATS, - NIC_GET_DEVICE_INFO, - NIC_GET_CABLE_STATE, - NIC_GET_OPERATION_MODE, - NIC_SET_OPERATION_MODE, - NIC_AUTONEG_ENABLE, - NIC_AUTONEG_DISABLE, - NIC_AUTONEG_PROBE, - NIC_AUTONEG_RESTART, - NIC_GET_PAUSE, - NIC_SET_PAUSE, - NIC_UNICAST_GET_MODE, - NIC_UNICAST_SET_MODE, - NIC_MULTICAST_GET_MODE, - NIC_MULTICAST_SET_MODE, - NIC_BROADCAST_GET_MODE, - NIC_BROADCAST_SET_MODE, - NIC_DEFECTIVE_GET_MODE, - NIC_DEFECTIVE_SET_MODE, - NIC_BLOCKED_SOURCES_GET, - NIC_BLOCKED_SOURCES_SET, - NIC_VLAN_GET_MASK, - NIC_VLAN_SET_MASK, - NIC_VLAN_SET_TAG, - NIC_WOL_VIRTUE_ADD, - NIC_WOL_VIRTUE_REMOVE, - NIC_WOL_VIRTUE_PROBE, - NIC_WOL_VIRTUE_LIST, - NIC_WOL_VIRTUE_GET_CAPS, - NIC_WOL_LOAD_INFO, - NIC_OFFLOAD_PROBE, - NIC_OFFLOAD_SET, - NIC_POLL_GET_MODE, - NIC_POLL_SET_MODE, - NIC_POLL_NOW -} nic_funcs_t; - -typedef enum { - NIC_EV_ADDR_CHANGED = IPC_FIRST_USER_METHOD, - NIC_EV_RECEIVED, - NIC_EV_DEVICE_STATE -} nic_event_t; - -extern int nic_send_frame(async_sess_t *, void *, size_t); -extern int nic_callback_create(async_sess_t *, async_client_conn_t, void *); -extern int nic_get_state(async_sess_t *, nic_device_state_t *); -extern int nic_set_state(async_sess_t *, nic_device_state_t); -extern int nic_get_address(async_sess_t *, nic_address_t *); -extern int nic_set_address(async_sess_t *, const nic_address_t *); -extern int nic_get_stats(async_sess_t *, nic_device_stats_t *); -extern int nic_get_device_info(async_sess_t *, nic_device_info_t *); -extern int nic_get_cable_state(async_sess_t *, nic_cable_state_t *); - -extern int nic_get_operation_mode(async_sess_t *, int *, nic_channel_mode_t *, - nic_role_t *); -extern int nic_set_operation_mode(async_sess_t *, int, nic_channel_mode_t, - nic_role_t); -extern int nic_autoneg_enable(async_sess_t *, uint32_t); -extern int nic_autoneg_disable(async_sess_t *); -extern int nic_autoneg_probe(async_sess_t *, uint32_t *, uint32_t *, - nic_result_t *, nic_result_t *); -extern int nic_autoneg_restart(async_sess_t *); -extern int nic_get_pause(async_sess_t *, nic_result_t *, nic_result_t *, - uint16_t *); -extern int nic_set_pause(async_sess_t *, int, int, uint16_t); - -extern int nic_unicast_get_mode(async_sess_t *, nic_unicast_mode_t *, size_t, - nic_address_t *, size_t *); -extern int nic_unicast_set_mode(async_sess_t *, nic_unicast_mode_t, - const nic_address_t *, size_t); -extern int nic_multicast_get_mode(async_sess_t *, nic_multicast_mode_t *, - size_t, nic_address_t *, size_t *); -extern int nic_multicast_set_mode(async_sess_t *, nic_multicast_mode_t, - const nic_address_t *, size_t); -extern int nic_broadcast_get_mode(async_sess_t *, nic_broadcast_mode_t *); -extern int nic_broadcast_set_mode(async_sess_t *, nic_broadcast_mode_t); -extern int nic_defective_get_mode(async_sess_t *, uint32_t *); -extern int nic_defective_set_mode(async_sess_t *, uint32_t); -extern int nic_blocked_sources_get(async_sess_t *, size_t, nic_address_t *, - size_t *); -extern int nic_blocked_sources_set(async_sess_t *, const nic_address_t *, - size_t); - -extern int nic_vlan_get_mask(async_sess_t *, nic_vlan_mask_t *); -extern int nic_vlan_set_mask(async_sess_t *, const nic_vlan_mask_t *); -extern int nic_vlan_set_tag(async_sess_t *, uint16_t, bool, bool); - -extern int nic_wol_virtue_add(async_sess_t *, nic_wv_type_t, const void *, - size_t, nic_wv_id_t *); -extern int nic_wol_virtue_remove(async_sess_t *, nic_wv_id_t); -extern int nic_wol_virtue_probe(async_sess_t *, nic_wv_id_t, nic_wv_type_t *, - size_t, void *, size_t *); -extern int nic_wol_virtue_list(async_sess_t *, nic_wv_type_t, size_t, - nic_wv_id_t *, size_t *); -extern int nic_wol_virtue_get_caps(async_sess_t *, nic_wv_type_t, int *); -extern int nic_wol_load_info(async_sess_t *, nic_wv_type_t *, size_t, uint8_t *, - size_t *); - -extern int nic_offload_probe(async_sess_t *, uint32_t *, uint32_t *); -extern int nic_offload_set(async_sess_t *, uint32_t, uint32_t); - -extern int nic_poll_get_mode(async_sess_t *, nic_poll_mode_t *, - struct timeval *); -extern int nic_poll_set_mode(async_sess_t *, nic_poll_mode_t, - const struct timeval *); -extern int nic_poll_now(async_sess_t *); - -#endif - -/** @} - */ Index: uspace/lib/drv/generic/remote_nic.c =================================================================== --- uspace/lib/drv/generic/remote_nic.c (revision 26c03dbdf129d84bd2eab547247da016fe47f30d) +++ uspace/lib/drv/generic/remote_nic.c (revision 7858acbf41d53b9ad6dcaf06f30f37ba260f89f8) @@ -41,7 +41,1296 @@ #include #include -#include #include "ops/nic.h" +#include "nic_iface.h" + +typedef enum { + NIC_SEND_MESSAGE = 0, + NIC_CALLBACK_CREATE, + NIC_GET_STATE, + NIC_SET_STATE, + NIC_GET_ADDRESS, + NIC_SET_ADDRESS, + NIC_GET_STATS, + NIC_GET_DEVICE_INFO, + NIC_GET_CABLE_STATE, + NIC_GET_OPERATION_MODE, + NIC_SET_OPERATION_MODE, + NIC_AUTONEG_ENABLE, + NIC_AUTONEG_DISABLE, + NIC_AUTONEG_PROBE, + NIC_AUTONEG_RESTART, + NIC_GET_PAUSE, + NIC_SET_PAUSE, + NIC_UNICAST_GET_MODE, + NIC_UNICAST_SET_MODE, + NIC_MULTICAST_GET_MODE, + NIC_MULTICAST_SET_MODE, + NIC_BROADCAST_GET_MODE, + NIC_BROADCAST_SET_MODE, + NIC_DEFECTIVE_GET_MODE, + NIC_DEFECTIVE_SET_MODE, + NIC_BLOCKED_SOURCES_GET, + NIC_BLOCKED_SOURCES_SET, + NIC_VLAN_GET_MASK, + NIC_VLAN_SET_MASK, + NIC_VLAN_SET_TAG, + NIC_WOL_VIRTUE_ADD, + NIC_WOL_VIRTUE_REMOVE, + NIC_WOL_VIRTUE_PROBE, + NIC_WOL_VIRTUE_LIST, + NIC_WOL_VIRTUE_GET_CAPS, + NIC_WOL_LOAD_INFO, + NIC_OFFLOAD_PROBE, + NIC_OFFLOAD_SET, + NIC_POLL_GET_MODE, + NIC_POLL_SET_MODE, + NIC_POLL_NOW +} nic_funcs_t; + +/** Send frame from NIC + * + * @param[in] dev_sess + * @param[in] data Frame data + * @param[in] size Frame size in bytes + * + * @return EOK If the operation was successfully completed + * + */ +int nic_send_frame(async_sess_t *dev_sess, void *data, size_t size) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + + ipc_call_t answer; + aid_t req = async_send_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_SEND_MESSAGE, &answer); + sysarg_t retval = async_data_write_start(exch, data, size); + + async_exchange_end(exch); + + if (retval != EOK) { + async_forget(req); + return retval; + } + + async_wait_for(req, &retval); + return retval; +} + +/** Create callback connection from NIC service + * + * @param[in] dev_sess + * @param[in] device_id + * + * @return EOK If the operation was successfully completed + * + */ +int nic_callback_create(async_sess_t *dev_sess, async_client_conn_t cfun, + void *carg) +{ + ipc_call_t answer; + int rc; + sysarg_t retval; + + async_exch_t *exch = async_exchange_begin(dev_sess); + aid_t req = async_send_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_CALLBACK_CREATE, &answer); + + rc = async_connect_to_me(exch, 0, 0, 0, cfun, carg); + if (rc != EOK) { + async_forget(req); + return rc; + } + async_exchange_end(exch); + + async_wait_for(req, &retval); + return (int) retval; +} + +/** Get the current state of the device + * + * @param[in] dev_sess + * @param[out] state Current state + * + * @return EOK If the operation was successfully completed + * + */ +int nic_get_state(async_sess_t *dev_sess, nic_device_state_t *state) +{ + assert(state); + + sysarg_t _state; + + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_1_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_GET_STATE, &_state); + async_exchange_end(exch); + + *state = (nic_device_state_t) _state; + + return rc; +} + +/** Request the device to change its state + * + * @param[in] dev_sess + * @param[in] state New state + * + * @return EOK If the operation was successfully completed + * + */ +int nic_set_state(async_sess_t *dev_sess, nic_device_state_t state) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_2_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_SET_STATE, state); + async_exchange_end(exch); + + return rc; +} + +/** Request the MAC address of the device + * + * @param[in] dev_sess + * @param[out] address Structure with buffer for the address + * + * @return EOK If the operation was successfully completed + * + */ +int nic_get_address(async_sess_t *dev_sess, nic_address_t *address) +{ + assert(address); + + async_exch_t *exch = async_exchange_begin(dev_sess); + aid_t aid = async_send_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_GET_ADDRESS, NULL); + int rc = async_data_read_start(exch, address, sizeof(nic_address_t)); + async_exchange_end(exch); + + sysarg_t res; + async_wait_for(aid, &res); + + if (rc != EOK) + return rc; + + return (int) res; +} + +/** Set the address of the device (e.g. MAC on Ethernet) + * + * @param[in] dev_sess + * @param[in] address Pointer to the address + * + * @return EOK If the operation was successfully completed + * + */ +int nic_set_address(async_sess_t *dev_sess, const nic_address_t *address) +{ + assert(address); + + async_exch_t *exch = async_exchange_begin(dev_sess); + aid_t aid = async_send_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_SET_ADDRESS, NULL); + int rc = async_data_write_start(exch, address, sizeof(nic_address_t)); + async_exchange_end(exch); + + sysarg_t res; + async_wait_for(aid, &res); + + if (rc != EOK) + return rc; + + return (int) res; +} + +/** Request statistic data about NIC operation. + * + * @param[in] dev_sess + * @param[out] stats Structure with the statistics + * + * @return EOK If the operation was successfully completed + * + */ +int nic_get_stats(async_sess_t *dev_sess, nic_device_stats_t *stats) +{ + assert(stats); + + async_exch_t *exch = async_exchange_begin(dev_sess); + + int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_GET_STATS); + if (rc != EOK) { + async_exchange_end(exch); + return rc; + } + + rc = async_data_read_start(exch, stats, sizeof(nic_device_stats_t)); + + async_exchange_end(exch); + + return rc; +} + +/** Request information about the device. + * + * @see nic_device_info_t + * + * @param[in] dev_sess + * @param[out] device_info Information about the device + * + * @return EOK If the operation was successfully completed + * + */ +int nic_get_device_info(async_sess_t *dev_sess, nic_device_info_t *device_info) +{ + assert(device_info); + + async_exch_t *exch = async_exchange_begin(dev_sess); + + int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_GET_DEVICE_INFO); + if (rc != EOK) { + async_exchange_end(exch); + return rc; + } + + rc = async_data_read_start(exch, device_info, sizeof(nic_device_info_t)); + + async_exchange_end(exch); + + return rc; +} + +/** Request status of the cable (plugged/unplugged) + * + * @param[in] dev_sess + * @param[out] cable_state Current cable state + * + * @return EOK If the operation was successfully completed + * + */ +int nic_get_cable_state(async_sess_t *dev_sess, nic_cable_state_t *cable_state) +{ + assert(cable_state); + + sysarg_t _cable_state; + + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_1_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_GET_CABLE_STATE, &_cable_state); + async_exchange_end(exch); + + *cable_state = (nic_cable_state_t) _cable_state; + + return rc; +} + +/** Request current operation mode. + * + * @param[in] dev_sess + * @param[out] speed Current operation speed in Mbps. Can be NULL. + * @param[out] duplex Full duplex/half duplex. Can be NULL. + * @param[out] role Master/slave/auto. Can be NULL. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_get_operation_mode(async_sess_t *dev_sess, int *speed, + nic_channel_mode_t *duplex, nic_role_t *role) +{ + sysarg_t _speed; + sysarg_t _duplex; + sysarg_t _role; + + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_1_3(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_GET_OPERATION_MODE, &_speed, &_duplex, &_role); + async_exchange_end(exch); + + if (speed) + *speed = (int) _speed; + + if (duplex) + *duplex = (nic_channel_mode_t) _duplex; + + if (role) + *role = (nic_role_t) _role; + + return rc; +} + +/** Set current operation mode. + * + * If the NIC has auto-negotiation enabled, this command + * disables auto-negotiation and sets the operation mode. + * + * @param[in] dev_sess + * @param[in] speed Operation speed in Mbps + * @param[in] duplex Full duplex/half duplex + * @param[in] role Master/slave/auto (e.g. in Gbit Ethernet] + * + * @return EOK If the operation was successfully completed + * + */ +int nic_set_operation_mode(async_sess_t *dev_sess, int speed, + nic_channel_mode_t duplex, nic_role_t role) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_4_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_SET_OPERATION_MODE, (sysarg_t) speed, (sysarg_t) duplex, + (sysarg_t) role); + async_exchange_end(exch); + + return rc; +} + +/** Enable auto-negotiation. + * + * The advertisement argument can only limit some modes, + * it can never force the NIC to advertise unsupported modes. + * + * The allowed modes are defined in "nic/eth_phys.h" in the C library. + * + * @param[in] dev_sess + * @param[in] advertisement Allowed advertised modes. Use 0 for all modes. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_autoneg_enable(async_sess_t *dev_sess, uint32_t advertisement) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_2_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_AUTONEG_ENABLE, (sysarg_t) advertisement); + async_exchange_end(exch); + + return rc; +} + +/** Disable auto-negotiation. + * + * @param[in] dev_sess + * + * @return EOK If the operation was successfully completed + * + */ +int nic_autoneg_disable(async_sess_t *dev_sess) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_AUTONEG_DISABLE); + async_exchange_end(exch); + + return rc; +} + +/** Probe current state of auto-negotiation. + * + * Modes are defined in the "nic/eth_phys.h" in the C library. + * + * @param[in] dev_sess + * @param[out] our_advertisement Modes advertised by this NIC. + * Can be NULL. + * @param[out] their_advertisement Modes advertised by the other side. + * Can be NULL. + * @param[out] result General state of auto-negotiation. + * Can be NULL. + * @param[out] their_result State of other side auto-negotiation. + * Can be NULL. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_autoneg_probe(async_sess_t *dev_sess, uint32_t *our_advertisement, + uint32_t *their_advertisement, nic_result_t *result, + nic_result_t *their_result) +{ + sysarg_t _our_advertisement; + sysarg_t _their_advertisement; + sysarg_t _result; + sysarg_t _their_result; + + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_1_4(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_AUTONEG_PROBE, &_our_advertisement, &_their_advertisement, + &_result, &_their_result); + async_exchange_end(exch); + + if (our_advertisement) + *our_advertisement = (uint32_t) _our_advertisement; + + if (*their_advertisement) + *their_advertisement = (uint32_t) _their_advertisement; + + if (result) + *result = (nic_result_t) _result; + + if (their_result) + *their_result = (nic_result_t) _their_result; + + return rc; +} + +/** Restart the auto-negotiation process. + * + * @param[in] dev_sess + * + * @return EOK If the operation was successfully completed + * + */ +int nic_autoneg_restart(async_sess_t *dev_sess) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_AUTONEG_RESTART); + async_exchange_end(exch); + + return rc; +} + +/** Query party's sending and reception of the PAUSE frame. + * + * @param[in] dev_sess + * @param[out] we_send This NIC sends the PAUSE frame (true/false) + * @param[out] we_receive This NIC receives the PAUSE frame (true/false) + * @param[out] pause The time set to transmitted PAUSE frames. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_get_pause(async_sess_t *dev_sess, nic_result_t *we_send, + nic_result_t *we_receive, uint16_t *pause) +{ + sysarg_t _we_send; + sysarg_t _we_receive; + sysarg_t _pause; + + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_1_3(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_GET_PAUSE, &_we_send, &_we_receive, &_pause); + async_exchange_end(exch); + + if (we_send) + *we_send = _we_send; + + if (we_receive) + *we_receive = _we_receive; + + if (pause) + *pause = _pause; + + return rc; +} + +/** Control sending and reception of the PAUSE frame. + * + * @param[in] dev_sess + * @param[in] allow_send Allow sending the PAUSE frame (true/false) + * @param[in] allow_receive Allow reception of the PAUSE frame (true/false) + * @param[in] pause Pause length in 512 bit units written + * to transmitted frames. The value 0 means + * auto value (the best). If the requested + * time cannot be set the driver is allowed + * to set the nearest supported value. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_set_pause(async_sess_t *dev_sess, int allow_send, int allow_receive, + uint16_t pause) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_4_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_SET_PAUSE, allow_send, allow_receive, pause); + async_exchange_end(exch); + + return rc; +} + +/** Retrieve current settings of unicast frames reception. + * + * Note: In case of mode != NIC_UNICAST_LIST the contents of + * address_list and address_count are undefined. + * + * @param[in] dev_sess + * @param[out] mode Current operation mode + * @param[in] max_count Maximal number of addresses that could + * be written into the list buffer. + * @param[out] address_list Buffer for the list (array). Can be NULL. + * @param[out] address_count Number of addresses in the list before + * possible truncation due to the max_count. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_unicast_get_mode(async_sess_t *dev_sess, nic_unicast_mode_t *mode, + size_t max_count, nic_address_t *address_list, size_t *address_count) +{ + assert(mode); + + sysarg_t _mode; + sysarg_t _address_count; + + if (!address_list) + max_count = 0; + + async_exch_t *exch = async_exchange_begin(dev_sess); + + int rc = async_req_2_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_UNICAST_GET_MODE, max_count, &_mode, &_address_count); + if (rc != EOK) { + async_exchange_end(exch); + return rc; + } + + *mode = (nic_unicast_mode_t) _mode; + if (address_count) + *address_count = (size_t) _address_count; + + if ((max_count) && (_address_count)) + rc = async_data_read_start(exch, address_list, + max_count * sizeof(nic_address_t)); + + async_exchange_end(exch); + + return rc; +} + +/** Set which unicast frames are received. + * + * @param[in] dev_sess + * @param[in] mode Current operation mode + * @param[in] address_list The list of addresses. Can be NULL. + * @param[in] address_count Number of addresses in the list. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_unicast_set_mode(async_sess_t *dev_sess, nic_unicast_mode_t mode, + const nic_address_t *address_list, size_t address_count) +{ + if (address_list == NULL) + address_count = 0; + + async_exch_t *exch = async_exchange_begin(dev_sess); + + aid_t message_id = async_send_3(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_UNICAST_SET_MODE, (sysarg_t) mode, address_count, NULL); + + int rc; + if (address_count) + rc = async_data_write_start(exch, address_list, + address_count * sizeof(nic_address_t)); + else + rc = EOK; + + async_exchange_end(exch); + + sysarg_t res; + async_wait_for(message_id, &res); + + if (rc != EOK) + return rc; + + return (int) res; +} + +/** Retrieve current settings of multicast frames reception. + * + * Note: In case of mode != NIC_MULTICAST_LIST the contents of + * address_list and address_count are undefined. + * + * @param[in] dev_sess + * @param[out] mode Current operation mode + * @param[in] max_count Maximal number of addresses that could + * be written into the list buffer. + * @param[out] address_list Buffer for the list (array). Can be NULL. + * @param[out] address_count Number of addresses in the list before + * possible truncation due to the max_count. + * Can be NULL. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_multicast_get_mode(async_sess_t *dev_sess, nic_multicast_mode_t *mode, + size_t max_count, nic_address_t *address_list, size_t *address_count) +{ + assert(mode); + + sysarg_t _mode; + + if (!address_list) + max_count = 0; + + async_exch_t *exch = async_exchange_begin(dev_sess); + + sysarg_t ac; + int rc = async_req_2_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_MULTICAST_GET_MODE, max_count, &_mode, &ac); + if (rc != EOK) { + async_exchange_end(exch); + return rc; + } + + *mode = (nic_multicast_mode_t) _mode; + if (address_count) + *address_count = (size_t) ac; + + if ((max_count) && (ac)) + rc = async_data_read_start(exch, address_list, + max_count * sizeof(nic_address_t)); + + async_exchange_end(exch); + return rc; +} + +/** Set which multicast frames are received. + * + * @param[in] dev_sess + * @param[in] mode Current operation mode + * @param[in] address_list The list of addresses. Can be NULL. + * @param[in] address_count Number of addresses in the list. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_multicast_set_mode(async_sess_t *dev_sess, nic_multicast_mode_t mode, + const nic_address_t *address_list, size_t address_count) +{ + if (address_list == NULL) + address_count = 0; + + async_exch_t *exch = async_exchange_begin(dev_sess); + + aid_t message_id = async_send_3(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_MULTICAST_SET_MODE, (sysarg_t) mode, address_count, NULL); + + int rc; + if (address_count) + rc = async_data_write_start(exch, address_list, + address_count * sizeof(nic_address_t)); + else + rc = EOK; + + async_exchange_end(exch); + + sysarg_t res; + async_wait_for(message_id, &res); + + if (rc != EOK) + return rc; + + return (int) res; +} + +/** Determine if broadcast packets are received. + * + * @param[in] dev_sess + * @param[out] mode Current operation mode + * + * @return EOK If the operation was successfully completed + * + */ +int nic_broadcast_get_mode(async_sess_t *dev_sess, nic_broadcast_mode_t *mode) +{ + assert(mode); + + sysarg_t _mode; + + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_1_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_BROADCAST_GET_MODE, &_mode); + async_exchange_end(exch); + + *mode = (nic_broadcast_mode_t) _mode; + + return rc; +} + +/** Set whether broadcast packets are received. + * + * @param[in] dev_sess + * @param[in] mode Current operation mode + * + * @return EOK If the operation was successfully completed + * + */ +int nic_broadcast_set_mode(async_sess_t *dev_sess, nic_broadcast_mode_t mode) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_2_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_BROADCAST_SET_MODE, mode); + async_exchange_end(exch); + + return rc; +} + +/** Determine if defective (erroneous) packets are received. + * + * @param[in] dev_sess + * @param[out] mode Bitmask specifying allowed errors + * + * @return EOK If the operation was successfully completed + * + */ +int nic_defective_get_mode(async_sess_t *dev_sess, uint32_t *mode) +{ + assert(mode); + + sysarg_t _mode; + + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_1_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_DEFECTIVE_GET_MODE, &_mode); + async_exchange_end(exch); + + *mode = (uint32_t) _mode; + + return rc; +} + +/** Set whether defective (erroneous) packets are received. + * + * @param[in] dev_sess + * @param[out] mode Bitmask specifying allowed errors + * + * @return EOK If the operation was successfully completed + * + */ +int nic_defective_set_mode(async_sess_t *dev_sess, uint32_t mode) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_2_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_DEFECTIVE_SET_MODE, mode); + async_exchange_end(exch); + + return rc; +} + +/** Retrieve the currently blocked source MAC addresses. + * + * @param[in] dev_sess + * @param[in] max_count Maximal number of addresses that could + * be written into the list buffer. + * @param[out] address_list Buffer for the list (array). Can be NULL. + * @param[out] address_count Number of addresses in the list before + * possible truncation due to the max_count. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_blocked_sources_get(async_sess_t *dev_sess, size_t max_count, + nic_address_t *address_list, size_t *address_count) +{ + if (!address_list) + max_count = 0; + + async_exch_t *exch = async_exchange_begin(dev_sess); + + sysarg_t ac; + int rc = async_req_2_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_BLOCKED_SOURCES_GET, max_count, &ac); + if (rc != EOK) { + async_exchange_end(exch); + return rc; + } + + if (address_count) + *address_count = (size_t) ac; + + if ((max_count) && (ac)) + rc = async_data_read_start(exch, address_list, + max_count * sizeof(nic_address_t)); + + async_exchange_end(exch); + return rc; +} + +/** Set which source MACs are blocked + * + * @param[in] dev_sess + * @param[in] address_list The list of addresses. Can be NULL. + * @param[in] address_count Number of addresses in the list. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_blocked_sources_set(async_sess_t *dev_sess, + const nic_address_t *address_list, size_t address_count) +{ + if (address_list == NULL) + address_count = 0; + + async_exch_t *exch = async_exchange_begin(dev_sess); + + aid_t message_id = async_send_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_BLOCKED_SOURCES_SET, address_count, NULL); + + int rc; + if (address_count) + rc = async_data_write_start(exch, address_list, + address_count * sizeof(nic_address_t)); + else + rc = EOK; + + async_exchange_end(exch); + + sysarg_t res; + async_wait_for(message_id, &res); + + if (rc != EOK) + return rc; + + return (int) res; +} + +/** Request current VLAN filtering mask. + * + * @param[in] dev_sess + * @param[out] stats Structure with the statistics + * + * @return EOK If the operation was successfully completed + * + */ +int nic_vlan_get_mask(async_sess_t *dev_sess, nic_vlan_mask_t *mask) +{ + assert(mask); + + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_VLAN_GET_MASK); + if (rc != EOK) { + async_exchange_end(exch); + return rc; + } + + rc = async_data_read_start(exch, mask, sizeof(nic_vlan_mask_t)); + async_exchange_end(exch); + + return rc; +} + +/** Set the mask used for VLAN filtering. + * + * If NULL, VLAN filtering is disabled. + * + * @param[in] dev_sess + * @param[in] mask Pointer to mask structure or NULL to disable. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_vlan_set_mask(async_sess_t *dev_sess, const nic_vlan_mask_t *mask) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + + aid_t message_id = async_send_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_VLAN_SET_MASK, mask != NULL, NULL); + + int rc; + if (mask != NULL) + rc = async_data_write_start(exch, mask, sizeof(nic_vlan_mask_t)); + else + rc = EOK; + + async_exchange_end(exch); + + sysarg_t res; + async_wait_for(message_id, &res); + + if (rc != EOK) + return rc; + + return (int) res; +} + +/** Set VLAN (802.1q) tag. + * + * Set whether the tag is to be signaled in offload info and + * if the tag should be stripped from received frames and added + * to sent frames automatically. Not every combination of add + * and strip must be supported. + * + * @param[in] dev_sess + * @param[in] tag VLAN priority (top 3 bits) and + * the VLAN tag (bottom 12 bits) + * @param[in] add Add the VLAN tag automatically (boolean) + * @param[in] strip Strip the VLAN tag automatically (boolean) + * + * @return EOK If the operation was successfully completed + * + */ +int nic_vlan_set_tag(async_sess_t *dev_sess, uint16_t tag, bool add, bool strip) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_4_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_VLAN_SET_TAG, (sysarg_t) tag, (sysarg_t) add, (sysarg_t) strip); + async_exchange_end(exch); + + return rc; +} + +/** Add new Wake-On-LAN virtue. + * + * @param[in] dev_sess + * @param[in] type Type of the virtue + * @param[in] data Data required for this virtue + * (depends on type) + * @param[in] length Length of the data + * @param[out] id Identifier of the new virtue + * + * @return EOK If the operation was successfully completed + * + */ +int nic_wol_virtue_add(async_sess_t *dev_sess, nic_wv_type_t type, + const void *data, size_t length, nic_wv_id_t *id) +{ + assert(id); + + bool send_data = ((data != NULL) && (length != 0)); + async_exch_t *exch = async_exchange_begin(dev_sess); + + ipc_call_t result; + aid_t message_id = async_send_3(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_WOL_VIRTUE_ADD, (sysarg_t) type, send_data, &result); + + sysarg_t res; + if (send_data) { + int rc = async_data_write_start(exch, data, length); + if (rc != EOK) { + async_exchange_end(exch); + async_wait_for(message_id, &res); + return rc; + } + } + + async_exchange_end(exch); + async_wait_for(message_id, &res); + + *id = IPC_GET_ARG1(result); + return (int) res; +} + +/** Remove Wake-On-LAN virtue. + * + * @param[in] dev_sess + * @param[in] id Virtue identifier + * + * @return EOK If the operation was successfully completed + * + */ +int nic_wol_virtue_remove(async_sess_t *dev_sess, nic_wv_id_t id) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_2_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_WOL_VIRTUE_REMOVE, (sysarg_t) id); + async_exchange_end(exch); + + return rc; +} + +/** Get information about virtue. + * + * @param[in] dev_sess + * @param[in] id Virtue identifier + * @param[out] type Type of the filter. Can be NULL. + * @param[out] max_length Size of the data buffer. + * @param[out] data Buffer for data used when the + * virtue was created. Can be NULL. + * @param[out] length Length of the data. Can be NULL. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_wol_virtue_probe(async_sess_t *dev_sess, nic_wv_id_t id, + nic_wv_type_t *type, size_t max_length, void *data, size_t *length) +{ + sysarg_t _type; + sysarg_t _length; + + if (data == NULL) + max_length = 0; + + async_exch_t *exch = async_exchange_begin(dev_sess); + + int rc = async_req_3_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_WOL_VIRTUE_PROBE, (sysarg_t) id, max_length, + &_type, &_length); + if (rc != EOK) { + async_exchange_end(exch); + return rc; + } + + if (type) + *type = _type; + + if (length) + *length = _length; + + if ((max_length) && (_length != 0)) + rc = async_data_read_start(exch, data, max_length); + + async_exchange_end(exch); + return rc; +} + +/** Get a list of all virtues of the specified type. + * + * When NIC_WV_NONE is specified as the virtue type the function + * lists virtues of all types. + * + * @param[in] dev_sess + * @param[in] type Type of the virtues + * @param[in] max_count Maximum number of ids that can be + * written into the list buffer. + * @param[out] id_list Buffer for to the list of virtue ids. + * Can be NULL. + * @param[out] id_count Number of virtue identifiers in the list + * before possible truncation due to the + * max_count. Can be NULL. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_wol_virtue_list(async_sess_t *dev_sess, nic_wv_type_t type, + size_t max_count, nic_wv_id_t *id_list, size_t *id_count) +{ + if (id_list == NULL) + max_count = 0; + + async_exch_t *exch = async_exchange_begin(dev_sess); + + sysarg_t count; + int rc = async_req_3_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_WOL_VIRTUE_LIST, (sysarg_t) type, max_count, &count); + + if (id_count) + *id_count = (size_t) count; + + if ((rc != EOK) || (!max_count)) { + async_exchange_end(exch); + return rc; + } + + rc = async_data_read_start(exch, id_list, + max_count * sizeof(nic_wv_id_t)); + + async_exchange_end(exch); + return rc; +} + +/** Get number of virtues that can be enabled yet. + * + * Count: < 0 => Virtue of this type can be never used + * = 0 => No more virtues can be enabled + * > 0 => #count virtues can be enabled yet + * + * @param[in] dev_sess + * @param[in] type Virtue type + * @param[out] count Number of virtues + * + * @return EOK If the operation was successfully completed + * + */ +int nic_wol_virtue_get_caps(async_sess_t *dev_sess, nic_wv_type_t type, + int *count) +{ + assert(count); + + sysarg_t _count; + + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_2_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_WOL_VIRTUE_GET_CAPS, (sysarg_t) type, &_count); + async_exchange_end(exch); + + *count = (int) _count; + return rc; +} + +/** Load the frame that issued the wakeup. + * + * The NIC can support only matched_type, only part of the frame + * can be available or not at all. Sometimes even the type can be + * uncertain -- in this case the matched_type contains NIC_WV_NONE. + * + * Frame_length can be greater than max_length, but at most max_length + * bytes will be copied into the frame buffer. + * + * Note: Only the type of the filter can be detected, not the concrete + * filter, because the driver is probably not running when the wakeup + * is issued. + * + * @param[in] dev_sess + * @param[out] matched_type Type of the filter that issued wakeup. + * @param[in] max_length Size of the buffer + * @param[out] frame Buffer for the frame. Can be NULL. + * @param[out] frame_length Length of the stored frame. Can be NULL. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_wol_load_info(async_sess_t *dev_sess, nic_wv_type_t *matched_type, + size_t max_length, uint8_t *frame, size_t *frame_length) +{ + assert(matched_type); + + sysarg_t _matched_type; + sysarg_t _frame_length; + + if (frame == NULL) + max_length = 0; + + async_exch_t *exch = async_exchange_begin(dev_sess); + + int rc = async_req_2_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_WOL_LOAD_INFO, max_length, &_matched_type, &_frame_length); + if (rc != EOK) { + async_exchange_end(exch); + return rc; + } + + *matched_type = (nic_wv_type_t) _matched_type; + if (frame_length) + *frame_length = (size_t) _frame_length; + + if ((max_length != 0) && (_frame_length != 0)) + rc = async_data_read_start(exch, frame, max_length); + + async_exchange_end(exch); + return rc; +} + +/** Probe supported options and current setting of offload computations + * + * @param[in] dev_sess + * @param[out] supported Supported offload options + * @param[out] active Currently active offload options + * + * @return EOK If the operation was successfully completed + * + */ +int nic_offload_probe(async_sess_t *dev_sess, uint32_t *supported, + uint32_t *active) +{ + assert(supported); + assert(active); + + sysarg_t _supported; + sysarg_t _active; + + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_1_2(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_OFFLOAD_PROBE, &_supported, &_active); + async_exchange_end(exch); + + *supported = (uint32_t) _supported; + *active = (uint32_t) _active; + return rc; +} + +/** Set which offload computations can be performed on the NIC. + * + * @param[in] dev_sess + * @param[in] mask Mask for the options (only those set here will be set) + * @param[in] active Which options should be enabled and which disabled + * + * @return EOK If the operation was successfully completed + * + */ +int nic_offload_set(async_sess_t *dev_sess, uint32_t mask, uint32_t active) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_3_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_AUTONEG_RESTART, (sysarg_t) mask, (sysarg_t) active); + async_exchange_end(exch); + + return rc; +} + +/** Query the current interrupt/poll mode of the NIC + * + * @param[in] dev_sess + * @param[out] mode Current poll mode + * @param[out] period Period used in periodic polling. + * Can be NULL. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_poll_get_mode(async_sess_t *dev_sess, nic_poll_mode_t *mode, + struct timeval *period) +{ + assert(mode); + + sysarg_t _mode; + + async_exch_t *exch = async_exchange_begin(dev_sess); + + int rc = async_req_2_1(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_POLL_GET_MODE, period != NULL, &_mode); + if (rc != EOK) { + async_exchange_end(exch); + return rc; + } + + *mode = (nic_poll_mode_t) _mode; + + if (period != NULL) + rc = async_data_read_start(exch, period, sizeof(struct timeval)); + + async_exchange_end(exch); + return rc; +} + +/** Set the interrupt/poll mode of the NIC. + * + * @param[in] dev_sess + * @param[in] mode New poll mode + * @param[in] period Period used in periodic polling. Can be NULL. + * + * @return EOK If the operation was successfully completed + * + */ +int nic_poll_set_mode(async_sess_t *dev_sess, nic_poll_mode_t mode, + const struct timeval *period) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + + aid_t message_id = async_send_3(exch, DEV_IFACE_ID(NIC_DEV_IFACE), + NIC_POLL_SET_MODE, (sysarg_t) mode, period != NULL, NULL); + + int rc; + if (period) + rc = async_data_write_start(exch, period, sizeof(struct timeval)); + else + rc = EOK; + + async_exchange_end(exch); + + sysarg_t res; + async_wait_for(message_id, &res); + + if (rc != EOK) + return rc; + + return (int) res; +} + +/** Request the driver to poll the NIC. + * + * @param[in] dev_sess + * + * @return EOK If the operation was successfully completed + * + */ +int nic_poll_now(async_sess_t *dev_sess) +{ + async_exch_t *exch = async_exchange_begin(dev_sess); + int rc = async_req_1_0(exch, DEV_IFACE_ID(NIC_DEV_IFACE), NIC_POLL_NOW); + async_exchange_end(exch); + + return rc; +} static void remote_nic_send_frame(ddf_fun_t *dev, void *iface, Index: uspace/lib/drv/include/nic_iface.h =================================================================== --- uspace/lib/drv/include/nic_iface.h (revision 7858acbf41d53b9ad6dcaf06f30f37ba260f89f8) +++ uspace/lib/drv/include/nic_iface.h (revision 7858acbf41d53b9ad6dcaf06f30f37ba260f89f8) @@ -0,0 +1,116 @@ +/* + * Copyright (c) 2010 Radim Vansa + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * - The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. + * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + /** @addtogroup libc + * @{ + */ +/** @file + */ + +#ifndef LIBDRV_NIC_IFACE_H_ +#define LIBDRV_NIC_IFACE_H_ + +#include +#include +#include + + +typedef enum { + NIC_EV_ADDR_CHANGED = IPC_FIRST_USER_METHOD, + NIC_EV_RECEIVED, + NIC_EV_DEVICE_STATE +} nic_event_t; + +extern int nic_send_frame(async_sess_t *, void *, size_t); +extern int nic_callback_create(async_sess_t *, async_client_conn_t, void *); +extern int nic_get_state(async_sess_t *, nic_device_state_t *); +extern int nic_set_state(async_sess_t *, nic_device_state_t); +extern int nic_get_address(async_sess_t *, nic_address_t *); +extern int nic_set_address(async_sess_t *, const nic_address_t *); +extern int nic_get_stats(async_sess_t *, nic_device_stats_t *); +extern int nic_get_device_info(async_sess_t *, nic_device_info_t *); +extern int nic_get_cable_state(async_sess_t *, nic_cable_state_t *); + +extern int nic_get_operation_mode(async_sess_t *, int *, nic_channel_mode_t *, + nic_role_t *); +extern int nic_set_operation_mode(async_sess_t *, int, nic_channel_mode_t, + nic_role_t); +extern int nic_autoneg_enable(async_sess_t *, uint32_t); +extern int nic_autoneg_disable(async_sess_t *); +extern int nic_autoneg_probe(async_sess_t *, uint32_t *, uint32_t *, + nic_result_t *, nic_result_t *); +extern int nic_autoneg_restart(async_sess_t *); +extern int nic_get_pause(async_sess_t *, nic_result_t *, nic_result_t *, + uint16_t *); +extern int nic_set_pause(async_sess_t *, int, int, uint16_t); + +extern int nic_unicast_get_mode(async_sess_t *, nic_unicast_mode_t *, size_t, + nic_address_t *, size_t *); +extern int nic_unicast_set_mode(async_sess_t *, nic_unicast_mode_t, + const nic_address_t *, size_t); +extern int nic_multicast_get_mode(async_sess_t *, nic_multicast_mode_t *, + size_t, nic_address_t *, size_t *); +extern int nic_multicast_set_mode(async_sess_t *, nic_multicast_mode_t, + const nic_address_t *, size_t); +extern int nic_broadcast_get_mode(async_sess_t *, nic_broadcast_mode_t *); +extern int nic_broadcast_set_mode(async_sess_t *, nic_broadcast_mode_t); +extern int nic_defective_get_mode(async_sess_t *, uint32_t *); +extern int nic_defective_set_mode(async_sess_t *, uint32_t); +extern int nic_blocked_sources_get(async_sess_t *, size_t, nic_address_t *, + size_t *); +extern int nic_blocked_sources_set(async_sess_t *, const nic_address_t *, + size_t); + +extern int nic_vlan_get_mask(async_sess_t *, nic_vlan_mask_t *); +extern int nic_vlan_set_mask(async_sess_t *, const nic_vlan_mask_t *); +extern int nic_vlan_set_tag(async_sess_t *, uint16_t, bool, bool); + +extern int nic_wol_virtue_add(async_sess_t *, nic_wv_type_t, const void *, + size_t, nic_wv_id_t *); +extern int nic_wol_virtue_remove(async_sess_t *, nic_wv_id_t); +extern int nic_wol_virtue_probe(async_sess_t *, nic_wv_id_t, nic_wv_type_t *, + size_t, void *, size_t *); +extern int nic_wol_virtue_list(async_sess_t *, nic_wv_type_t, size_t, + nic_wv_id_t *, size_t *); +extern int nic_wol_virtue_get_caps(async_sess_t *, nic_wv_type_t, int *); +extern int nic_wol_load_info(async_sess_t *, nic_wv_type_t *, size_t, uint8_t *, + size_t *); + +extern int nic_offload_probe(async_sess_t *, uint32_t *, uint32_t *); +extern int nic_offload_set(async_sess_t *, uint32_t, uint32_t); + +extern int nic_poll_get_mode(async_sess_t *, nic_poll_mode_t *, + struct timeval *); +extern int nic_poll_set_mode(async_sess_t *, nic_poll_mode_t, + const struct timeval *); +extern int nic_poll_now(async_sess_t *); + +#endif + +/** @} + */ Index: uspace/lib/nic/Makefile =================================================================== --- uspace/lib/nic/Makefile (revision 26c03dbdf129d84bd2eab547247da016fe47f30d) +++ uspace/lib/nic/Makefile (revision 7858acbf41d53b9ad6dcaf06f30f37ba260f89f8) @@ -30,4 +30,5 @@ LIBRARY = libnic EXTRA_CFLAGS += -DLIBNIC_INTERNAL -Iinclude -I$(LIBDRV_PREFIX)/include +LIBS = $(LIBDRV_PREFIX)/libdrv.a SOURCES = \ Index: uspace/lib/nic/src/nic_ev.c =================================================================== --- uspace/lib/nic/src/nic_ev.c (revision 26c03dbdf129d84bd2eab547247da016fe47f30d) +++ uspace/lib/nic/src/nic_ev.c (revision 7858acbf41d53b9ad6dcaf06f30f37ba260f89f8) @@ -37,5 +37,5 @@ #include -#include +#include #include #include "nic_ev.h" Index: uspace/srv/net/ethip/Makefile =================================================================== --- uspace/srv/net/ethip/Makefile (revision 26c03dbdf129d84bd2eab547247da016fe47f30d) +++ uspace/srv/net/ethip/Makefile (revision 7858acbf41d53b9ad6dcaf06f30f37ba260f89f8) @@ -29,4 +29,6 @@ USPACE_PREFIX = ../../.. BINARY = ethip +EXTRA_CFLAGS = -I$(LIBDRV_PREFIX)/include +LIBS = $(LIBDRV_PREFIX)/libdrv.a SOURCES = \ Index: uspace/srv/net/ethip/ethip_nic.c =================================================================== --- uspace/srv/net/ethip/ethip_nic.c (revision 26c03dbdf129d84bd2eab547247da016fe47f30d) +++ uspace/srv/net/ethip/ethip_nic.c (revision 7858acbf41d53b9ad6dcaf06f30f37ba260f89f8) @@ -43,5 +43,5 @@ #include #include -#include +#include #include #include