Index: uspace/Makefile
===================================================================
--- uspace/Makefile	(revision 103cf26a44475a0b5eab1330fbc1d8306d448745)
+++ uspace/Makefile	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -118,4 +118,5 @@
 		srv/hw/irc/i8259 \
 		drv/ehci-hcd \
+		drv/ohci \
 		drv/uhci-hcd \
 		drv/uhci-rhd \
Index: uspace/drv/ohci/Makefile
===================================================================
--- uspace/drv/ohci/Makefile	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/Makefile	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,42 @@
+#
+# Copyright (c) 2011 Jan Vesely
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# - Redistributions of source code must retain the above copyright
+#   notice, this list of conditions and the following disclaimer.
+# - Redistributions in binary form must reproduce the above copyright
+#   notice, this list of conditions and the following disclaimer in the
+#   documentation and/or other materials provided with the distribution.
+# - The name of the author may not be used to endorse or promote products
+#   derived from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+USPACE_PREFIX = ../..
+LIBS = $(LIBDRV_PREFIX)/libdrv.a $(LIBUSB_PREFIX)/libusb.a
+EXTRA_CFLAGS += -I$(LIBDRV_PREFIX)/include -I$(LIBUSB_PREFIX)/include -I.
+BINARY = ohci
+
+SOURCES = \
+	hc_iface.c \
+	batch.c \
+	main.c \
+	ohci_hc.c \
+	ohci_rh.c \
+	pci.c
+
+include $(USPACE_PREFIX)/Makefile.common
Index: uspace/drv/ohci/batch.c
===================================================================
--- uspace/drv/ohci/batch.c	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/batch.c	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,327 @@
+/*
+ * Copyright (c) 2011 Jan Vesely
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/** @addtogroup drvusbohcihc
+ * @{
+ */
+/** @file
+ * @brief OHCI driver USB transaction structure
+ */
+#include <errno.h>
+#include <str_error.h>
+
+#include <usb/usb.h>
+#include <usb/debug.h>
+
+#include "batch.h"
+
+static void batch_call_in(batch_t *instance);
+static void batch_call_out(batch_t *instance);
+static void batch_call_in_and_dispose(batch_t *instance);
+static void batch_call_out_and_dispose(batch_t *instance);
+
+/** Allocate memory and initialize internal data structure.
+ *
+ * @param[in] fun DDF function to pass to callback.
+ * @param[in] target Device and endpoint target of the transaction.
+ * @param[in] transfer_type Interrupt, Control or Bulk.
+ * @param[in] max_packet_size maximum allowed size of data packets.
+ * @param[in] speed Speed of the transaction.
+ * @param[in] buffer Data source/destination.
+ * @param[in] size Size of the buffer.
+ * @param[in] setup_buffer Setup data source (if not NULL)
+ * @param[in] setup_size Size of setup_buffer (should be always 8)
+ * @param[in] func_in function to call on inbound transaction completion
+ * @param[in] func_out function to call on outbound transaction completion
+ * @param[in] arg additional parameter to func_in or func_out
+ * @param[in] manager Pointer to toggle management structure.
+ * @return Valid pointer if all substructures were successfully created,
+ * NULL otherwise.
+ *
+ * Determines the number of needed packets (TDs). Prepares a transport buffer
+ * (that is accessible by the hardware). Initializes parameters needed for the
+ * transaction and callback.
+ */
+batch_t * batch_get(ddf_fun_t *fun, usb_target_t target,
+    usb_transfer_type_t transfer_type, size_t max_packet_size,
+    usb_speed_t speed, char *buffer, size_t size,
+    char* setup_buffer, size_t setup_size,
+    usbhc_iface_transfer_in_callback_t func_in,
+    usbhc_iface_transfer_out_callback_t func_out, void *arg
+    )
+{
+	assert(func_in == NULL || func_out == NULL);
+	assert(func_in != NULL || func_out != NULL);
+
+#define CHECK_NULL_DISPOSE_RETURN(ptr, message...) \
+	if (ptr == NULL) { \
+		usb_log_error(message); \
+		if (instance) { \
+			batch_dispose(instance); \
+		} \
+		return NULL; \
+	} else (void)0
+
+	batch_t *instance = malloc(sizeof(batch_t));
+	CHECK_NULL_DISPOSE_RETURN(instance,
+	    "Failed to allocate batch instance.\n");
+	bzero(instance, sizeof(batch_t));
+
+	if (size > 0) {
+		/* TODO: use device accessible malloc here */
+		instance->transport_buffer = malloc(size);
+		CHECK_NULL_DISPOSE_RETURN(instance->transport_buffer,
+		    "Failed to allocate device accessible buffer.\n");
+	}
+
+	if (setup_size > 0) {
+		/* TODO: use device accessible malloc here */
+		instance->setup_buffer = malloc(setup_size);
+		CHECK_NULL_DISPOSE_RETURN(instance->setup_buffer,
+		    "Failed to allocate device accessible setup buffer.\n");
+		memcpy(instance->setup_buffer, setup_buffer, setup_size);
+	}
+
+	link_initialize(&instance->link);
+
+	instance->max_packet_size = max_packet_size;
+	instance->target = target;
+	instance->transfer_type = transfer_type;
+	instance->buffer = buffer;
+	instance->buffer_size = size;
+	instance->setup_size = setup_size;
+	instance->fun = fun;
+	instance->arg = arg;
+	instance->speed = speed;
+	instance->callback_out = func_out;
+	instance->callback_in = func_in;
+
+	usb_log_debug("Batch(%p) %d:%d memory structures ready.\n",
+	    instance, target.address, target.endpoint);
+	return instance;
+}
+/*----------------------------------------------------------------------------*/
+/** Mark batch as finished and continue with next step.
+ *
+ * @param[in] instance Batch structure to use.
+ *
+ */
+void batch_finish(batch_t *instance, int error)
+{
+	assert(instance);
+	instance->error = error;
+	instance->next_step(instance);
+}
+/*----------------------------------------------------------------------------*/
+/** Check batch TDs for activity.
+ *
+ * @param[in] instance Batch structure to use.
+ * @return False, if there is an active TD, true otherwise.
+ *
+ * Walk all TDs. Stop with false if there is an active one (it is to be
+ * processed). Stop with true if an error is found. Return true if the last TS
+ * is reached.
+ */
+bool batch_is_complete(batch_t *instance)
+{
+	assert(instance);
+	/* TODO: implement */
+	return true;
+}
+/*----------------------------------------------------------------------------*/
+/** Prepares control write transaction.
+ *
+ * @param[in] instance Batch structure to use.
+ *
+ * Uses genercir control function with pids OUT and IN.
+ */
+void batch_control_write(batch_t *instance)
+{
+	assert(instance);
+	/* We are data out, we are supposed to provide data */
+	memcpy(instance->transport_buffer, instance->buffer,
+	    instance->buffer_size);
+	instance->next_step = batch_call_out_and_dispose;
+	/* TODO: implement */
+	usb_log_debug("Batch(%p) CONTROL WRITE initialized.\n", instance);
+}
+/*----------------------------------------------------------------------------*/
+/** Prepares control read transaction.
+ *
+ * @param[in] instance Batch structure to use.
+ *
+ * Uses generic control with pids IN and OUT.
+ */
+void batch_control_read(batch_t *instance)
+{
+	assert(instance);
+	instance->next_step = batch_call_in_and_dispose;
+	/* TODO: implement */
+	usb_log_debug("Batch(%p) CONTROL READ initialized.\n", instance);
+}
+/*----------------------------------------------------------------------------*/
+/** Prepare interrupt in transaction.
+ *
+ * @param[in] instance Batch structure to use.
+ *
+ * Data transaction with PID_IN.
+ */
+void batch_interrupt_in(batch_t *instance)
+{
+	assert(instance);
+	/* TODO: implement */
+	instance->next_step = batch_call_in_and_dispose;
+	usb_log_debug("Batch(%p) INTERRUPT IN initialized.\n", instance);
+}
+/*----------------------------------------------------------------------------*/
+/** Prepare interrupt out transaction.
+ *
+ * @param[in] instance Batch structure to use.
+ *
+ * Data transaction with PID_OUT.
+ */
+void batch_interrupt_out(batch_t *instance)
+{
+	assert(instance);
+	/* We are data out, we are supposed to provide data */
+	memcpy(instance->transport_buffer, instance->buffer,
+	    instance->buffer_size);
+	instance->next_step = batch_call_out_and_dispose;
+	/* TODO: implement */
+	usb_log_debug("Batch(%p) INTERRUPT OUT initialized.\n", instance);
+}
+/*----------------------------------------------------------------------------*/
+/** Prepare bulk in transaction.
+ *
+ * @param[in] instance Batch structure to use.
+ *
+ * Data transaction with PID_IN.
+ */
+void batch_bulk_in(batch_t *instance)
+{
+	assert(instance);
+	instance->next_step = batch_call_in_and_dispose;
+	/* TODO: implement */
+	usb_log_debug("Batch(%p) BULK IN initialized.\n", instance);
+}
+/*----------------------------------------------------------------------------*/
+/** Prepare bulk out transaction.
+ *
+ * @param[in] instance Batch structure to use.
+ *
+ * Data transaction with PID_OUT.
+ */
+void batch_bulk_out(batch_t *instance)
+{
+	assert(instance);
+	/* We are data out, we are supposed to provide data */
+	memcpy(instance->transport_buffer, instance->buffer,
+	    instance->buffer_size);
+	instance->next_step = batch_call_out_and_dispose;
+	/* TODO: implement */
+	usb_log_debug("Batch(%p) BULK OUT initialized.\n", instance);
+}
+/*----------------------------------------------------------------------------*/
+/** Prepare data, get error status and call callback in.
+ *
+ * @param[in] instance Batch structure to use.
+ * Copies data from transport buffer, and calls callback with appropriate
+ * parameters.
+ */
+void batch_call_in(batch_t *instance)
+{
+	assert(instance);
+	assert(instance->callback_in);
+
+	/* We are data in, we need data */
+	memcpy(instance->buffer, instance->transport_buffer,
+	    instance->buffer_size);
+
+	int err = instance->error;
+	usb_log_debug("Batch(%p) callback IN(type:%d): %s(%d), %zu.\n",
+	    instance, instance->transfer_type, str_error(err), err,
+	    instance->transfered_size);
+
+	instance->callback_in(
+	    instance->fun, err, instance->transfered_size, instance->arg);
+}
+/*----------------------------------------------------------------------------*/
+/** Get error status and call callback out.
+ *
+ * @param[in] instance Batch structure to use.
+ */
+void batch_call_out(batch_t *instance)
+{
+	assert(instance);
+	assert(instance->callback_out);
+
+	int err = instance->error;
+	usb_log_debug("Batch(%p) callback OUT(type:%d): %s(%d).\n",
+	    instance, instance->transfer_type, str_error(err), err);
+	instance->callback_out(instance->fun,
+	    err, instance->arg);
+}
+/*----------------------------------------------------------------------------*/
+/** Helper function calls callback and correctly disposes of batch structure.
+ *
+ * @param[in] instance Batch structure to use.
+ */
+void batch_call_in_and_dispose(batch_t *instance)
+{
+	assert(instance);
+	batch_call_in(instance);
+	batch_dispose(instance);
+}
+/*----------------------------------------------------------------------------*/
+/** Helper function calls callback and correctly disposes of batch structure.
+ *
+ * @param[in] instance Batch structure to use.
+ */
+void batch_call_out_and_dispose(batch_t *instance)
+{
+	assert(instance);
+	batch_call_out(instance);
+	batch_dispose(instance);
+}
+/*----------------------------------------------------------------------------*/
+/** Correctly dispose all used data structures.
+ *
+ * @param[in] instance Batch structure to use.
+ */
+void batch_dispose(batch_t *instance)
+{
+	assert(instance);
+	usb_log_debug("Batch(%p) disposing.\n", instance);
+	if (instance->setup_buffer)
+		free(instance->setup_buffer);
+	if (instance->transport_buffer)
+		free(instance->transport_buffer);
+	free(instance);
+}
+/**
+ * @}
+ */
Index: uspace/drv/ohci/batch.h
===================================================================
--- uspace/drv/ohci/batch.h	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/batch.h	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,99 @@
+/*
+ * Copyright (c) 2011 Jan Vesely
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/** @addtogroup drvusbuhcihc
+ * @{
+ */
+/** @file
+ * @brief UHCI driver USB transaction structure
+ */
+#ifndef DRV_UHCI_BATCH_H
+#define DRV_UHCI_BATCH_H
+
+#include <adt/list.h>
+
+#include <usbhc_iface.h>
+#include <usb/usb.h>
+
+typedef struct batch
+{
+	link_t link;
+	usb_speed_t speed;
+	usb_target_t target;
+	usb_transfer_type_t transfer_type;
+	usbhc_iface_transfer_in_callback_t callback_in;
+	usbhc_iface_transfer_out_callback_t callback_out;
+	void *arg;
+	char *transport_buffer;
+	char *setup_buffer;
+	size_t setup_size;
+	char *buffer;
+	size_t buffer_size;
+	size_t max_packet_size;
+	size_t packets;
+	size_t transfered_size;
+	int error;
+	ddf_fun_t *fun;
+	void (*next_step)(struct batch*);
+} batch_t;
+
+batch_t * batch_get(
+    ddf_fun_t *fun,
+		usb_target_t target,
+    usb_transfer_type_t transfer_type,
+		size_t max_packet_size,
+    usb_speed_t speed,
+		char *buffer,
+		size_t size,
+		char *setup_buffer,
+		size_t setup_size,
+    usbhc_iface_transfer_in_callback_t func_in,
+    usbhc_iface_transfer_out_callback_t func_out,
+		void *arg
+		);
+
+void batch_dispose(batch_t *instance);
+
+void batch_finish(batch_t *instance, int error);
+
+bool batch_is_complete(batch_t *instance);
+
+void batch_control_write(batch_t *instance);
+
+void batch_control_read(batch_t *instance);
+
+void batch_interrupt_in(batch_t *instance);
+
+void batch_interrupt_out(batch_t *instance);
+
+void batch_bulk_in(batch_t *instance);
+
+void batch_bulk_out(batch_t *instance);
+#endif
+/**
+ * @}
+ */
Index: uspace/drv/ohci/hc_iface.c
===================================================================
--- uspace/drv/ohci/hc_iface.c	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/hc_iface.c	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,347 @@
+/*
+ * Copyright (c) 2011 Vojtech Horky
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/** @addtogroup drvusbohci
+ * @{
+ */
+/** @file
+ * USB-HC interface implementation.
+ */
+#include <ddf/driver.h>
+#include <ddf/interrupt.h>
+#include <device/hw_res.h>
+#include <errno.h>
+#include <str_error.h>
+
+#include <usb_iface.h>
+#include <usb/ddfiface.h>
+#include <usb/debug.h>
+
+#include "iface.h"
+
+#define UNSUPPORTED(methodname) \
+	usb_log_warning("Unsupported interface method `%s()' in %s:%d.\n", \
+	    methodname, __FILE__, __LINE__)
+
+/** Reserve default address.
+ *
+ * This function may block the caller.
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] speed Speed of the device for which the default address is
+ *	reserved.
+ * @return Error code.
+ */
+static int reserve_default_address(ddf_fun_t *fun, usb_speed_t speed)
+{
+	UNSUPPORTED("reserve_default_address");
+
+	return ENOTSUP;
+}
+
+/** Release default address.
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @return Error code.
+ */
+static int release_default_address(ddf_fun_t *fun)
+{
+	UNSUPPORTED("release_default_address");
+
+	return ENOTSUP;
+}
+
+/** Found free USB address.
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] speed Speed of the device that will get this address.
+ * @param[out] address Non-null pointer where to store the free address.
+ * @return Error code.
+ */
+static int request_address(ddf_fun_t *fun, usb_speed_t speed,
+    usb_address_t *address)
+{
+	UNSUPPORTED("request_address");
+
+	return ENOTSUP;
+}
+
+/** Bind USB address with device devman handle.
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] address USB address of the device.
+ * @param[in] handle Devman handle of the device.
+ * @return Error code.
+ */
+static int bind_address(ddf_fun_t *fun,
+    usb_address_t address, devman_handle_t handle)
+{
+	UNSUPPORTED("bind_address");
+
+	return ENOTSUP;
+}
+
+/** Release previously requested address.
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] address USB address to be released.
+ * @return Error code.
+ */
+static int release_address(ddf_fun_t *fun, usb_address_t address)
+{
+	UNSUPPORTED("release_address");
+
+	return ENOTSUP;
+}
+
+/** Register endpoint for bandwidth reservation.
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] address USB address of the device.
+ * @param[in] endpoint Endpoint number.
+ * @param[in] transfer_type USB transfer type.
+ * @param[in] direction Endpoint data direction.
+ * @param[in] max_packet_size Max packet size of the endpoint.
+ * @param[in] interval Polling interval.
+ * @return Error code.
+ */
+static int register_endpoint(ddf_fun_t *fun,
+    usb_address_t address, usb_endpoint_t endpoint,
+    usb_transfer_type_t transfer_type, usb_direction_t direction,
+    size_t max_packet_size, unsigned int interval)
+{
+	UNSUPPORTED("register_endpoint");
+
+	return ENOTSUP;
+}
+
+/** Unregister endpoint (free some bandwidth reservation).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] address USB address of the device.
+ * @param[in] endpoint Endpoint number.
+ * @param[in] direction Endpoint data direction.
+ * @return Error code.
+ */
+static int unregister_endpoint(ddf_fun_t *fun, usb_address_t address,
+    usb_endpoint_t endpoint, usb_direction_t direction)
+{
+	UNSUPPORTED("unregister_endpoint");
+
+	return ENOTSUP;
+}
+
+/** Schedule interrupt out transfer.
+ *
+ * The callback is supposed to be called once the transfer (on the wire) is
+ * complete regardless of the outcome.
+ * However, the callback could be called only when this function returns
+ * with success status (i.e. returns EOK).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] target Target pipe (address and endpoint number) specification.
+ * @param[in] max_packet_size Max packet size for the transfer.
+ * @param[in] data Data to be sent (in USB endianess, allocated and deallocated
+ *	by the caller).
+ * @param[in] size Size of the @p data buffer in bytes.
+ * @param[in] callback Callback to be issued once the transfer is complete.
+ * @param[in] arg Pass-through argument to the callback.
+ * @return Error code.
+ */
+static int interrupt_out(ddf_fun_t *fun, usb_target_t target,
+    size_t max_packet_size, void *data, size_t size,
+    usbhc_iface_transfer_out_callback_t callback, void *arg)
+{
+	UNSUPPORTED("interrupt_out");
+
+	return ENOTSUP;
+}
+
+/** Schedule interrupt in transfer.
+ *
+ * The callback is supposed to be called once the transfer (on the wire) is
+ * complete regardless of the outcome.
+ * However, the callback could be called only when this function returns
+ * with success status (i.e. returns EOK).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] target Target pipe (address and endpoint number) specification.
+ * @param[in] max_packet_size Max packet size for the transfer.
+ * @param[in] data Buffer where to store the data (in USB endianess,
+ *	allocated and deallocated by the caller).
+ * @param[in] size Size of the @p data buffer in bytes.
+ * @param[in] callback Callback to be issued once the transfer is complete.
+ * @param[in] arg Pass-through argument to the callback.
+ * @return Error code.
+ */
+static int interrupt_in(ddf_fun_t *fun, usb_target_t target,
+    size_t max_packet_size, void *data, size_t size,
+    usbhc_iface_transfer_in_callback_t callback, void *arg)
+{
+	UNSUPPORTED("interrupt_in");
+
+	return ENOTSUP;
+}
+
+/** Schedule bulk out transfer.
+ *
+ * The callback is supposed to be called once the transfer (on the wire) is
+ * complete regardless of the outcome.
+ * However, the callback could be called only when this function returns
+ * with success status (i.e. returns EOK).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] target Target pipe (address and endpoint number) specification.
+ * @param[in] max_packet_size Max packet size for the transfer.
+ * @param[in] data Data to be sent (in USB endianess, allocated and deallocated
+ *	by the caller).
+ * @param[in] size Size of the @p data buffer in bytes.
+ * @param[in] callback Callback to be issued once the transfer is complete.
+ * @param[in] arg Pass-through argument to the callback.
+ * @return Error code.
+ */
+static int bulk_out(ddf_fun_t *fun, usb_target_t target,
+    size_t max_packet_size, void *data, size_t size,
+    usbhc_iface_transfer_out_callback_t callback, void *arg)
+{
+	UNSUPPORTED("bulk_out");
+
+	return ENOTSUP;
+}
+
+/** Schedule bulk in transfer.
+ *
+ * The callback is supposed to be called once the transfer (on the wire) is
+ * complete regardless of the outcome.
+ * However, the callback could be called only when this function returns
+ * with success status (i.e. returns EOK).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] target Target pipe (address and endpoint number) specification.
+ * @param[in] max_packet_size Max packet size for the transfer.
+ * @param[in] data Buffer where to store the data (in USB endianess,
+ *	allocated and deallocated by the caller).
+ * @param[in] size Size of the @p data buffer in bytes.
+ * @param[in] callback Callback to be issued once the transfer is complete.
+ * @param[in] arg Pass-through argument to the callback.
+ * @return Error code.
+ */
+static int bulk_in(ddf_fun_t *fun, usb_target_t target,
+    size_t max_packet_size, void *data, size_t size,
+    usbhc_iface_transfer_in_callback_t callback, void *arg)
+{
+	UNSUPPORTED("bulk_in");
+
+	return ENOTSUP;
+}
+
+/** Schedule control write transfer.
+ *
+ * The callback is supposed to be called once the transfer (on the wire) is
+ * complete regardless of the outcome.
+ * However, the callback could be called only when this function returns
+ * with success status (i.e. returns EOK).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] target Target pipe (address and endpoint number) specification.
+ * @param[in] max_packet_size Max packet size for the transfer.
+ * @param[in] setup_packet Setup packet buffer (in USB endianess, allocated
+ *	and deallocated by the caller).
+ * @param[in] setup_packet_size Size of @p setup_packet buffer in bytes.
+ * @param[in] data_buffer Data buffer (in USB endianess, allocated and
+ *	deallocated by the caller).
+ * @param[in] data_buffer_size Size of @p data_buffer buffer in bytes.
+ * @param[in] callback Callback to be issued once the transfer is complete.
+ * @param[in] arg Pass-through argument to the callback.
+ * @return Error code.
+ */
+static int control_write(ddf_fun_t *fun, usb_target_t target,
+    size_t max_packet_size,
+    void *setup_packet, size_t setup_packet_size,
+    void *data_buffer, size_t data_buffer_size,
+    usbhc_iface_transfer_out_callback_t callback, void *arg)
+{
+	UNSUPPORTED("control_write");
+
+	return ENOTSUP;
+}
+
+/** Schedule control read transfer.
+ *
+ * The callback is supposed to be called once the transfer (on the wire) is
+ * complete regardless of the outcome.
+ * However, the callback could be called only when this function returns
+ * with success status (i.e. returns EOK).
+ *
+ * @param[in] fun Device function the action was invoked on.
+ * @param[in] target Target pipe (address and endpoint number) specification.
+ * @param[in] max_packet_size Max packet size for the transfer.
+ * @param[in] setup_packet Setup packet buffer (in USB endianess, allocated
+ *	and deallocated by the caller).
+ * @param[in] setup_packet_size Size of @p setup_packet buffer in bytes.
+ * @param[in] data_buffer Buffer where to store the data (in USB endianess,
+ *	allocated and deallocated by the caller).
+ * @param[in] data_buffer_size Size of @p data_buffer buffer in bytes.
+ * @param[in] callback Callback to be issued once the transfer is complete.
+ * @param[in] arg Pass-through argument to the callback.
+ * @return Error code.
+ */
+static int control_read(ddf_fun_t *fun, usb_target_t target,
+    size_t max_packet_size,
+    void *setup_packet, size_t setup_packet_size,
+    void *data_buffer, size_t data_buffer_size,
+    usbhc_iface_transfer_in_callback_t callback, void *arg)
+{
+	UNSUPPORTED("control_read");
+
+	return ENOTSUP;
+}
+
+/** Host controller interface implementation for EHCI. */
+usbhc_iface_t ohci_hc_iface = {
+	.reserve_default_address = reserve_default_address,
+	.release_default_address = release_default_address,
+	.request_address = request_address,
+	.bind_address = bind_address,
+	.release_address = release_address,
+
+	.register_endpoint = register_endpoint,
+	.unregister_endpoint = unregister_endpoint,
+
+	.interrupt_out = interrupt_out,
+	.interrupt_in = interrupt_in,
+
+	.bulk_out = bulk_out,
+	.bulk_in = bulk_in,
+
+	.control_write = control_write,
+	.control_read = control_read
+};
+
+/**
+ * @}
+ */
Index: uspace/drv/ohci/iface.h
===================================================================
--- uspace/drv/ohci/iface.h	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/iface.h	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2011 Vojtech Horky
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/** @addtogroup drvusbohci
+ * @{
+ */
+/** @file
+ * Common OHCI definitions.
+ */
+#ifndef DRV_OHCI_OHCI_H
+#define DRV_OHCI_OHCI_H
+
+#include <usbhc_iface.h>
+
+#define NAME "ohci-hcd"
+
+extern usbhc_iface_t ohci_hc_iface;
+
+#endif
+/**
+ * @}
+ */
+
Index: uspace/drv/ohci/main.c
===================================================================
--- uspace/drv/ohci/main.c	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/main.c	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,148 @@
+/*
+ * Copyright (c) 2011 Jan Vesely
+ * Copyright (c) 2011 Vojtech Horky
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/** @addtogroup drvusbohci
+ * @{
+ */
+/** @file
+ * Main routines of OHCI driver.
+ */
+#include <ddf/driver.h>
+#include <ddf/interrupt.h>
+#include <device/hw_res.h>
+#include <errno.h>
+#include <str_error.h>
+
+#include <usb_iface.h>
+#include <usb/ddfiface.h>
+#include <usb/debug.h>
+
+#include "pci.h"
+#include "iface.h"
+#include "ohci_hc.h"
+
+static int ohci_add_device(ddf_dev_t *device);
+/*----------------------------------------------------------------------------*/
+static driver_ops_t ohci_driver_ops = {
+	.add_device = ohci_add_device,
+};
+/*----------------------------------------------------------------------------*/
+static driver_t ohci_driver = {
+	.name = NAME,
+	.driver_ops = &ohci_driver_ops
+};
+static ddf_dev_ops_t hc_ops = {
+	.interfaces[USBHC_DEV_IFACE] = &ohci_hc_iface,
+};
+
+/*----------------------------------------------------------------------------*/
+/** Initializes a new ddf driver instance of OHCI hcd.
+ *
+ * @param[in] device DDF instance of the device to initialize.
+ * @return Error code.
+ */
+static int ohci_add_device(ddf_dev_t *device)
+{
+	assert(device);
+#define CHECK_RET_RETURN(ret, message...) \
+if (ret != EOK) { \
+	usb_log_error(message); \
+	return ret; \
+}
+
+	uintptr_t mem_reg_base = 0;
+	size_t mem_reg_size = 0;
+	int irq = 0;
+
+	int ret =
+	    pci_get_my_registers(device, &mem_reg_base, &mem_reg_size, &irq);
+	CHECK_RET_RETURN(ret,
+	    "Failed(%d) to get memory addresses:.\n", ret, device->handle);
+	usb_log_info("Memory mapped regs at 0x%X (size %zu), IRQ %d.\n",
+	    mem_reg_base, mem_reg_size, irq);
+
+	ret = pci_disable_legacy(device);
+	CHECK_RET_RETURN(ret,
+	    "Failed(%d) disable legacy USB: %s.\n", ret, str_error(ret));
+
+	ohci_hc_t *hcd = malloc(sizeof(ohci_hc_t));
+	if (hcd == NULL) {
+		usb_log_error("Failed to allocate OHCI driver.\n");
+		return ENOMEM;
+	}
+
+	ddf_fun_t *hc_fun = ddf_fun_create(device, fun_exposed, "ohci-hc");
+	if (hc_fun == NULL) {
+		usb_log_error("Failed to create OHCI function.\n");
+		free(hcd);
+		return ENOMEM;
+	}
+
+	ret = ohci_hc_init(hcd, hc_fun, mem_reg_base, mem_reg_size);
+	if (ret != EOK) {
+		usb_log_error("Failed to initialize OHCI driver.\n");
+		free(hcd);
+		return ret;
+	}
+
+	hc_fun->ops = &hc_ops;
+	ret = ddf_fun_bind(hc_fun);
+	if (ret != EOK) {
+		usb_log_error("Failed to bind OHCI function.\n");
+		ddf_fun_destroy(hc_fun);
+		free(hcd);
+		return ret;
+	}
+	hc_fun->driver_data = hcd;
+
+	/* TODO: register interrupt handler */
+
+	usb_log_info("Controlling new OHCI device `%s' (handle %llu).\n",
+	    device->name, device->handle);
+
+	return EOK;
+#undef CHECK_RET_RETURN
+}
+/*----------------------------------------------------------------------------*/
+/** Initializes global driver structures (NONE).
+ *
+ * @param[in] argc Nmber of arguments in argv vector (ignored).
+ * @param[in] argv Cmdline argument vector (ignored).
+ * @return Error code.
+ *
+ * Driver debug level is set here.
+ */
+int main(int argc, char *argv[])
+{
+	usb_log_enable(USB_LOG_LEVEL_DEBUG, NAME);
+	sleep(5);
+	return ddf_driver_main(&ohci_driver);
+}
+/**
+ * @}
+ */
Index: uspace/drv/ohci/ohci.ma
===================================================================
--- uspace/drv/ohci/ohci.ma	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/ohci.ma	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,1 @@
+10 pci/ven=106b&dev=003f
Index: uspace/drv/ohci/ohci_hc.c
===================================================================
--- uspace/drv/ohci/ohci_hc.c	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/ohci_hc.c	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2011 Jan Vesely
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/** @addtogroup drvusbohcihc
+ * @{
+ */
+/** @file
+ * @brief OHCI Host controller driver routines
+ */
+#include <errno.h>
+#include <str_error.h>
+#include <adt/list.h>
+#include <libarch/ddi.h>
+
+#include <usb/debug.h>
+#include <usb/usb.h>
+#include <usb/ddfiface.h>
+#include <usb_iface.h>
+
+#include "ohci_hc.h"
+
+int ohci_hc_init(ohci_hc_t *instance, ddf_fun_t *fun,
+    uintptr_t regs, size_t reg_size)
+{
+	assert(instance);
+	ohci_rh_init(&instance->rh, regs, reg_size);
+	/* TODO: implement */
+	/* TODO: register root hub */
+	return EOK;
+}
+/*----------------------------------------------------------------------------*/
+int ohci_hc_schedule(ohci_hc_t *instance, batch_t *batch)
+{
+	assert(instance);
+	assert(batch);
+	if (batch->target.address == instance->rh.address) {
+		ohci_rh_request(&instance->rh, batch);
+		return EOK;
+	}
+	/* TODO: implement */
+	return EOK;
+}
+/*----------------------------------------------------------------------------*/
+void ohci_hc_interrupt(ohci_hc_t *instance, uint16_t status)
+{
+	assert(instance);
+	ohci_rh_interrupt(&instance->rh);
+	/* TODO: implement */
+}
+/**
+ * @}
+ */
Index: uspace/drv/ohci/ohci_hc.h
===================================================================
--- uspace/drv/ohci/ohci_hc.h	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/ohci_hc.h	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,82 @@
+/*
+ * Copyright (c) 2011 Jan Vesely
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/** @addtogroup drvusbohcihc
+ * @{
+ */
+/** @file
+ * @brief OHCI host controller driver structure
+ */
+#ifndef DRV_OHCI_OHCI_HC_H
+#define DRV_OHCI_OHCI_HC_H
+
+#include <fibril.h>
+#include <fibril_synch.h>
+#include <adt/list.h>
+#include <ddi.h>
+
+#include <usb/usb.h>
+#include <usbhc_iface.h>
+
+#include "batch.h"
+#include "ohci_rh.h"
+
+typedef struct ohci_regs {
+} regs_t;
+
+
+typedef struct ohci_hc {
+	usb_address_t rh_address;
+	ohci_rh_t rh;
+	ddf_fun_t *ddf_instance;
+} ohci_hc_t;
+
+int ohci_hc_init(ohci_hc_t *instance, ddf_fun_t *fun,
+     uintptr_t regs, size_t reg_size);
+
+int ohci_hc_schedule(ohci_hc_t *instance, batch_t *batch);
+
+void ohci_hc_interrupt(ohci_hc_t *instance, uint16_t status);
+
+/** Safely dispose host controller internal structures
+ *
+ * @param[in] instance Host controller structure to use.
+ */
+static inline void ohci_hc_fini(ohci_hc_t *instance) { /* TODO: implement*/ };
+
+/** Get and cast pointer to the driver data
+ *
+ * @param[in] fun DDF function pointer
+ * @return cast pointer to driver_data
+ */
+static inline ohci_hc_t * fun_to_ohci_hc(ddf_fun_t *fun)
+	{ return (ohci_hc_t*)fun->driver_data; }
+#endif
+/**
+ * @}
+ */
Index: uspace/drv/ohci/ohci_rh.c
===================================================================
--- uspace/drv/ohci/ohci_rh.c	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/ohci_rh.c	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2011 Jan Vesely
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/** @addtogroup drvusbohci
+ * @{
+ */
+/** @file
+ * @brief UHCI driver
+ */
+#include <assert.h>
+#include <errno.h>
+#include <str_error.h>
+#include <stdio.h>
+
+#include <usb/debug.h>
+
+#include "ohci_rh.h"
+
+/** Root hub initialization
+ * @param[in] instance RH structure to initialize
+ * @param[in] fun DDF function representing UHCI root hub
+ * @param[in] reg_addr Address of root hub status and control registers.
+ * @param[in] reg_size Size of accessible address space.
+ * @return Error code.
+ */
+int ohci_rh_init(ohci_rh_t *instance, uintptr_t reg_addr, size_t reg_size)
+{
+	assert(instance);
+	instance->address = 0;
+	/* TODO: implement */
+	return EOK;
+}
+/*----------------------------------------------------------------------------*/
+void ohci_rh_request(ohci_rh_t *instance, batch_t *request)
+{
+	/* TODO: implement */
+}
+/*----------------------------------------------------------------------------*/
+void ohci_rh_interrupt(ohci_rh_t *instance)
+{
+	/* TODO: implement */
+}
+/**
+ * @}
+ */
Index: uspace/drv/ohci/ohci_rh.h
===================================================================
--- uspace/drv/ohci/ohci_rh.h	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/ohci_rh.h	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2011 Jan Vesely
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/** @addtogroup drvusbohci
+ * @{
+ */
+/** @file
+ * @brief OHCI driver
+ */
+#ifndef DRV_OHCI_OHCI_RH_H
+#define DRV_OHCI_OHCI_RH_H
+
+#include <usb/usb.h>
+
+#include "batch.h"
+
+typedef struct ohci_rh {
+	usb_address_t address;
+} ohci_rh_t;
+
+int ohci_rh_init(ohci_rh_t *instance, uintptr_t reg_addr, size_t reg_size);
+
+void ohci_rh_request(ohci_rh_t *instance, batch_t *request);
+
+void ohci_rh_interrupt(ohci_rh_t *instance);
+#endif
+/**
+ * @}
+ */
Index: uspace/drv/ohci/pci.c
===================================================================
--- uspace/drv/ohci/pci.c	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/pci.c	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,175 @@
+/*
+ * Copyright (c) 2011 Jan Vesely
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+/**
+ * @addtogroup drvusbohci
+ * @{
+ */
+/**
+ * @file
+ * PCI related functions needed by the OHCI driver.
+ */
+#include <errno.h>
+#include <assert.h>
+#include <as.h>
+#include <devman.h>
+#include <ddi.h>
+#include <libarch/ddi.h>
+#include <device/hw_res.h>
+
+#include <usb/debug.h>
+#include <pci_dev_iface.h>
+
+#include "pci.h"
+
+#define PAGE_SIZE_MASK 0xfffff000
+
+#define HCC_PARAMS_OFFSET 0x8
+#define HCC_PARAMS_EECP_MASK 0xff
+#define HCC_PARAMS_EECP_OFFSET 8
+
+#define CMD_OFFSET 0x0
+#define CONFIGFLAG_OFFSET 0x40
+
+#define USBCMD_RUN 1
+
+#define USBLEGSUP_OFFSET 0
+#define USBLEGSUP_BIOS_CONTROL (1 << 16)
+#define USBLEGSUP_OS_CONTROL (1 << 24)
+#define USBLEGCTLSTS_OFFSET 4
+
+#define DEFAULT_WAIT 10000
+#define WAIT_STEP 10
+
+/** Get address of registers and IRQ for given device.
+ *
+ * @param[in] dev Device asking for the addresses.
+ * @param[out] mem_reg_address Base address of the memory range.
+ * @param[out] mem_reg_size Size of the memory range.
+ * @param[out] irq_no IRQ assigned to the device.
+ * @return Error code.
+ */
+int pci_get_my_registers(ddf_dev_t *dev,
+    uintptr_t *mem_reg_address, size_t *mem_reg_size, int *irq_no)
+{
+	assert(dev != NULL);
+
+	int parent_phone = devman_parent_device_connect(dev->handle,
+	    IPC_FLAG_BLOCKING);
+	if (parent_phone < 0) {
+		return parent_phone;
+	}
+
+	int rc;
+
+	hw_resource_list_t hw_resources;
+	rc = hw_res_get_resource_list(parent_phone, &hw_resources);
+	if (rc != EOK) {
+		async_hangup(parent_phone);
+		return rc;
+	}
+
+	uintptr_t mem_address = 0;
+	size_t mem_size = 0;
+	bool mem_found = false;
+
+	int irq = 0;
+	bool irq_found = false;
+
+	size_t i;
+	for (i = 0; i < hw_resources.count; i++) {
+		hw_resource_t *res = &hw_resources.resources[i];
+		switch (res->type)
+		{
+		case INTERRUPT:
+			irq = res->res.interrupt.irq;
+			irq_found = true;
+			usb_log_debug2("Found interrupt: %d.\n", irq);
+			break;
+
+		case MEM_RANGE:
+			if (res->res.mem_range.address != 0
+			    && res->res.mem_range.size != 0 ) {
+				mem_address = res->res.mem_range.address;
+				mem_size = res->res.mem_range.size;
+				usb_log_debug2("Found mem: %llx %zu.\n",
+				    mem_address, mem_size);
+				mem_found = true;
+				}
+		default:
+			break;
+		}
+	}
+
+	if (mem_found && irq_found) {
+		*mem_reg_address = mem_address;
+		*mem_reg_size = mem_size;
+		*irq_no = irq;
+		rc = EOK;
+	} else {
+		rc = ENOENT;
+	}
+
+	async_hangup(parent_phone);
+	return rc;
+}
+/*----------------------------------------------------------------------------*/
+/** Calls the PCI driver with a request to enable interrupts
+ *
+ * @param[in] device Device asking for interrupts
+ * @return Error code.
+ */
+int pci_enable_interrupts(ddf_dev_t *device)
+{
+	int parent_phone =
+	    devman_parent_device_connect(device->handle, IPC_FLAG_BLOCKING);
+	if (parent_phone < 0) {
+		return parent_phone;
+	}
+	bool enabled = hw_res_enable_interrupt(parent_phone);
+	async_hangup(parent_phone);
+	return enabled ? EOK : EIO;
+}
+/*----------------------------------------------------------------------------*/
+/** Implements BIOS handoff routine as decribed in OHCI spec
+ *
+ * @param[in] device Device asking for interrupts
+ * @return Error code.
+ */
+int pci_disable_legacy(ddf_dev_t *device)
+{
+	/* TODO: implement */
+	return ENOTSUP;
+}
+/*----------------------------------------------------------------------------*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
Index: uspace/drv/ohci/pci.h
===================================================================
--- uspace/drv/ohci/pci.h	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
+++ uspace/drv/ohci/pci.h	(revision 41b96b443027a957b936df2b4feeeb4a4933f8a8)
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2011 Vojtech Horky
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * - Redistributions of source code must retain the above copyright
+ *   notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ *   notice, this list of conditions and the following disclaimer in the
+ *   documentation and/or other materials provided with the distribution.
+ * - The name of the author may not be used to endorse or promote products
+ *   derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/** @addtogroup drvusbohci
+ * @{
+ */
+/** @file
+ * PCI related functions needed by OHCI driver.
+ */
+#ifndef DRV_OHCI_PCI_H
+#define DRV_OHCI_PCI_H
+
+#include <ddf/driver.h>
+
+int pci_get_my_registers(ddf_dev_t *, uintptr_t *, size_t *, int *);
+int pci_enable_interrupts(ddf_dev_t *);
+int pci_disable_legacy(ddf_dev_t *);
+
+#endif
+/**
+ * @}
+ */
+