Changeset 2ac7af3 in mainline for uspace/drv


Ignore:
Timestamp:
2011-10-14T19:40:28Z (14 years ago)
Author:
Maurizio Lombardi <m.lombardi85@…>
Branches:
lfn, master, serial, ticket/834-toolchain-update, topic/msim-upgrade, topic/simplify-dev-export
Children:
df3caec5
Parents:
6d4d883 (diff), 3a5506a (diff)
Note: this is a merge changeset, the changes displayed below correspond to the merge itself.
Use the (diff) links above to see all the changes relative to each parent.
Message:

Merge mainline changes

Location:
uspace/drv/bus/usb
Files:
22 edited

Legend:

Unmodified
Added
Removed

  • uspace/drv/bus/usb/ohci/hc.c

    r6d4d883 r2ac7af3  
    571571        usb_log_debug2("OHCI HCCA initialized at %p.\n", instance->hcca);
    572572
    573         unsigned i = 0;
    574         for (; i < 32; ++i) {
     573        for (unsigned i = 0; i < 32; ++i) {
    575574                instance->hcca->int_ep[i] =
    576575                    instance->lists[USB_TRANSFER_INTERRUPT].list_head_pa;

  • uspace/drv/bus/usb/ohci/ohci_batch.c

    r6d4d883 r2ac7af3  
    5252        if (!ohci_batch)
    5353                return;
    54         unsigned i = 0;
    5554        if (ohci_batch->tds) {
    56                 for (; i< ohci_batch->td_count; ++i) {
     55                for (unsigned i = 0; i < ohci_batch->td_count; ++i) {
    5756                        if (i != ohci_batch->leave_td)
    5857                                free32(ohci_batch->tds[i]);
    … …  
    107106        ohci_batch->tds[0] = ohci_endpoint_get(usb_batch->ep)->td;
    108107        ohci_batch->leave_td = 0;
    109         unsigned i = 1;
    110         for (; i <= ohci_batch->td_count; ++i) {
     108
     109        for (unsigned i = 1; i <= ohci_batch->td_count; ++i) {
    111110                ohci_batch->tds[i] = malloc32(sizeof(td_t));
    112111                CHECK_NULL_DISPOSE_RET(ohci_batch->tds[i],
    … …  
    160159        usb_log_debug("Batch %p checking %zu td(s) for completion.\n",
    161160            ohci_batch->usb_batch, ohci_batch->td_count);
    162         usb_log_debug2("ED: %x:%x:%x:%x.\n",
     161        usb_log_debug2("ED: %08x:%08x:%08x:%08x.\n",
    163162            ohci_batch->ed->status, ohci_batch->ed->td_head,
    164163            ohci_batch->ed->td_tail, ohci_batch->ed->next);
    … …  
    167166        for (; i < ohci_batch->td_count; ++i) {
    168167                assert(ohci_batch->tds[i] != NULL);
    169                 usb_log_debug("TD %zu: %x:%x:%x:%x.\n", i,
     168                usb_log_debug("TD %zu: %08x:%08x:%08x:%08x.\n", i,
    170169                    ohci_batch->tds[i]->status, ohci_batch->tds[i]->cbp,
    171170                    ohci_batch->tds[i]->next, ohci_batch->tds[i]->be);
    … …  
    175174                ohci_batch->usb_batch->error = td_error(ohci_batch->tds[i]);
    176175                if (ohci_batch->usb_batch->error != EOK) {
    177                         usb_log_debug("Batch %p found error TD(%zu):%x.\n",
     176                        usb_log_debug("Batch %p found error TD(%zu):%08x.\n",
    178177                            ohci_batch->usb_batch, i,
    179178                            ohci_batch->tds[i]->status);
    … …  
    196195        ohci_batch->usb_batch->transfered_size =
    197196            ohci_batch->usb_batch->buffer_size;
    198         for (--i;i < ohci_batch->td_count; ++i)
     197        for (--i;i < ohci_batch->td_count; ++i) {
    199198                ohci_batch->usb_batch->transfered_size
    200199                    -= td_remain_size(ohci_batch->tds[i]);
     200        }
    201201
    202202        /* Clear possible ED HALT */
    … …  
    234234        assert(ohci_batch->usb_batch);
    235235        assert(dir == USB_DIRECTION_IN || dir == USB_DIRECTION_OUT);
    236         usb_log_debug("Using ED(%p): %x:%x:%x:%x.\n", ohci_batch->ed,
     236        usb_log_debug("Using ED(%p): %08x:%08x:%08x:%08x.\n", ohci_batch->ed,
    237237            ohci_batch->ed->status, ohci_batch->ed->td_tail,
    238238            ohci_batch->ed->td_head, ohci_batch->ed->next);
    … …  
    251251                ohci_batch->usb_batch->setup_size, toggle);
    252252        td_set_next(ohci_batch->tds[0], ohci_batch->tds[1]);
    253         usb_log_debug("Created CONTROL SETUP TD: %x:%x:%x:%x.\n",
     253        usb_log_debug("Created CONTROL SETUP TD: %08x:%08x:%08x:%08x.\n",
    254254            ohci_batch->tds[0]->status, ohci_batch->tds[0]->cbp,
    255255            ohci_batch->tds[0]->next, ohci_batch->tds[0]->be);
    … …  
    269269                td_set_next(ohci_batch->tds[td_current],
    270270                    ohci_batch->tds[td_current + 1]);
    271                 usb_log_debug("Created CONTROL DATA TD: %x:%x:%x:%x.\n",
     271                usb_log_debug("Created CONTROL DATA TD: %08x:%08x:%08x:%08x.\n",
    272272                    ohci_batch->tds[td_current]->status,
    273273                    ohci_batch->tds[td_current]->cbp,
    … …  
    286286        td_set_next(ohci_batch->tds[td_current],
    287287            ohci_batch->tds[td_current + 1]);
    288         usb_log_debug("Created CONTROL STATUS TD: %x:%x:%x:%x.\n",
     288        usb_log_debug("Created CONTROL STATUS TD: %08x:%08x:%08x:%08x.\n",
    289289            ohci_batch->tds[td_current]->status,
    290290            ohci_batch->tds[td_current]->cbp,
    … …  
    312312        assert(ohci_batch->usb_batch);
    313313        assert(dir == USB_DIRECTION_IN || dir == USB_DIRECTION_OUT);
    314         usb_log_debug("Using ED(%p): %x:%x:%x:%x.\n", ohci_batch->ed,
     314        usb_log_debug("Using ED(%p): %08x:%08x:%08x:%08x.\n", ohci_batch->ed,
    315315            ohci_batch->ed->status, ohci_batch->ed->td_tail,
    316316            ohci_batch->ed->td_head, ohci_batch->ed->next);
    … …  
    328328                    ohci_batch->tds[td_current + 1]);
    329329
    330                 usb_log_debug("Created DATA TD: %x:%x:%x:%x.\n",
     330                usb_log_debug("Created DATA TD: %08x:%08x:%08x:%08x.\n",
    331331                    ohci_batch->tds[td_current]->status,
    332332                    ohci_batch->tds[td_current]->cbp,

  • uspace/drv/bus/usb/ohci/pci.c

    r6d4d883 r2ac7af3  
    8585        bool irq_found = false;
    8686
    87         size_t i;
    88         for (i = 0; i < hw_resources.count; i++) {
     87        for (size_t i = 0; i < hw_resources.count; i++) {
    8988                hw_resource_t *res = &hw_resources.resources[i];
    9089                switch (res->type) {

  • uspace/drv/bus/usb/ohci/root_hub.c

    r6d4d883 r2ac7af3  
    351351                mask |= 1;
    352352        }
    353         size_t port = 1;
    354         for (; port <= instance->port_count; ++port) {
     353        for (size_t port = 1; port <= instance->port_count; ++port) {
    355354                /* Write-clean bits are those that indicate change */
    356355                if (RHPS_CHANGE_WC_MASK

  • uspace/drv/bus/usb/ohci/utils/malloc32.h

    r6d4d883 r2ac7af3  
    6969 */
    7070static inline void free32(void *addr)
    71         { if (addr) free(addr); }
     71        { free(addr); }
    7272#endif
    7373/**

  • uspace/drv/bus/usb/uhci/hc.c

    r6d4d883 r2ac7af3  
    299299        const uint32_t queue = LINK_POINTER_QH(
    300300                addr_to_phys(instance->transfers_interrupt.queue_head));
    301         unsigned i = 0;
    302         for(; i < UHCI_FRAME_LIST_COUNT; ++i) {
     301
     302        for (unsigned i = 0; i < UHCI_FRAME_LIST_COUNT; ++i) {
    303303                instance->frame_list[i] = queue;
    304304        }

  • uspace/drv/bus/usb/uhci/pci.c

    r6d4d883 r2ac7af3  
    8282        bool irq_found = false;
    8383
    84         size_t i;
    85         for (i = 0; i < hw_resources.count; i++) {
     84        for (size_t i = 0; i < hw_resources.count; i++) {
    8685                const hw_resource_t *res = &hw_resources.resources[i];
    8786                switch (res->type) {

  • uspace/drv/bus/usb/uhci/uhci_batch.c

    r6d4d883 r2ac7af3  
    167167            uhci_batch->td_count);
    168168        uhci_batch->usb_batch->transfered_size = 0;
    169         size_t i = 0;
    170         for (;i < uhci_batch->td_count; ++i) {
     169
     170        for (size_t i = 0;i < uhci_batch->td_count; ++i) {
    171171                if (td_is_active(&uhci_batch->tds[i])) {
    172172                        return false;

  • uspace/drv/bus/usb/uhci/utils/malloc32.h

    r6d4d883 r2ac7af3  
    6262}
    6363/*----------------------------------------------------------------------------*/
    64 /** Physical mallocator simulator
     64/** DMA malloc simulator
    6565 *
    6666 * @param[in] size Size of the required memory space
    67  * @return Address of the alligned and big enough memory place, NULL on failure.
     67 * @return Address of the aligned and big enough memory place, NULL on failure.
    6868 */
    69 static inline void * malloc32(size_t size) {
     69static inline void * malloc32(size_t size)
     70{
    7071        /* This works only when the host has less than 4GB of memory as
    7172         * physical address needs to fit into 32 bits */
    … …  
    8384}
    8485/*----------------------------------------------------------------------------*/
    85 /** Physical mallocator simulator
     86/** DMA malloc simulator
    8687 *
    8788 * @param[in] addr Address of the place allocated by malloc32
    8889 */
    89 static inline void free32(void *addr) {
    90         if (!addr)
    91                 return;
    92         free(addr);
    93 }
     90static inline void free32(void *addr)
     91        { free(addr); }
    9492/*----------------------------------------------------------------------------*/
    9593/** Create 4KB page mapping

  • uspace/drv/bus/usb/uhcirh/port.c

    r6d4d883 r2ac7af3  
    3737#include <str_error.h>
    3838#include <async.h>
     39#include <devman.h>
    3940
    4041#include <usb/usb.h>    /* usb_address_t */
    41 #include <usb/dev/hub.h>    /* usb_hc_new_device_wrapper */
    4242#include <usb/debug.h>
    4343
    4444#include "port.h"
    4545
     46#define MAX_ERROR_COUNT 5
     47
    4648static int uhci_port_check(void *port);
    47 static int uhci_port_reset_enable(int portno, void *arg);
     49static int uhci_port_reset_enable(void *arg);
    4850static int uhci_port_new_device(uhci_port_t *port, usb_speed_t speed);
    4951static int uhci_port_remove_device(uhci_port_t *port);
    … …  
    100102        port->number = number;
    101103        port->wait_period_usec = usec;
    102         port->attached_device = 0;
     104        port->attached_device.fun = NULL;
     105        port->attached_device.address = -1;
    103106        port->rh = rh;
    104107
    … …  
    150153        assert(instance);
    151154
     155        unsigned allowed_failures = MAX_ERROR_COUNT;
     156#define CHECK_RET_FAIL(ret, msg...) \
     157        if (ret != EOK) { \
     158                usb_log_error(msg); \
     159                if (!(allowed_failures-- > 0)) { \
     160                        usb_log_fatal( \
     161                           "Maximum number of failures reached, " \
     162                           "bailing out.\n"); \
     163                        return ret; \
     164                } \
     165                continue; \
     166        } else (void)0
     167
    152168        while (1) {
    153169                async_usleep(instance->wait_period_usec);
    … …  
    167183                    instance->id_string, port_status);
    168184
     185                int ret = usb_hc_connection_open(&instance->hc_connection);
     186                CHECK_RET_FAIL(ret, "%s: Failed to connect to HC %s.\n",
     187                    instance->id_string, str_error(ret));
     188
    169189                /* Remove any old device */
    170                 if (instance->attached_device) {
    171                         usb_log_debug2("%s: Removing device.\n",
    172                             instance->id_string);
     190                if (instance->attached_device.fun) {
    173191                        uhci_port_remove_device(instance);
    174192                }
    175193
    176                 int ret =
    177                     usb_hc_connection_open(&instance->hc_connection);
    178                 if (ret != EOK) {
    179                         usb_log_error("%s: Failed to connect to HC.",
    180                             instance->id_string);
    181                         continue;
    182                 }
    183 
    184194                if ((port_status & STATUS_CONNECTED) != 0) {
    185                         /* New device */
     195                        /* New device, this will take care of WC bits */
    186196                        const usb_speed_t speed =
    187197                            ((port_status & STATUS_LOW_SPEED) != 0) ?
    … …  
    196206
    197207                ret = usb_hc_connection_close(&instance->hc_connection);
    198                 if (ret != EOK) {
    199                         usb_log_error("%s: Failed to disconnect.",
    200                             instance->id_string);
    201                 }
     208                CHECK_RET_FAIL(ret, "%s: Failed to disconnect from hc: %s.\n",
     209                    instance->id_string, str_error(ret));
    202210        }
    203211        return EOK;
    … …  
    212220 * Resets and enables the ub port.
    213221 */
    214 int uhci_port_reset_enable(int portno, void *arg)
     222int uhci_port_reset_enable(void *arg)
    215223{
    216224        uhci_port_t *port = arg;
    … …  
    256264        usb_log_debug("%s: Detected new device.\n", port->id_string);
    257265
    258         int ret, count = 0;
    259         usb_address_t dev_addr;
     266        int ret, count = MAX_ERROR_COUNT;
    260267        do {
    261268                ret = usb_hc_new_device_wrapper(port->rh, &port->hc_connection,
    262                     speed, uhci_port_reset_enable, port->number, port,
    263                     &dev_addr, &port->attached_device, NULL, NULL, NULL);
    264         } while (ret != EOK && ++count < 4);
     269                    speed, uhci_port_reset_enable, port,
     270                    &port->attached_device.address, NULL, NULL,
     271                    &port->attached_device.fun);
     272        } while (ret != EOK && count-- > 0);
    265273
    266274        if (ret != EOK) {
    … …  
    271279        }
    272280
    273         usb_log_info("New device at port %u, address %d (handle %" PRIun ").\n",
    274             port->number, dev_addr, port->attached_device);
     281        usb_log_info("%s: New device, address %d (handle %" PRIun ").\n",
     282            port->id_string, port->attached_device.address,
     283            port->attached_device.fun->handle);
    275284        return EOK;
    276285}
    … …  
    278287/** Remove device.
    279288 *
    280  * @param[in] port Memory structure to use.
    281  * @return Error code.
    282  *
    283  * Does not work, DDF does not support device removal.
    284  * Does not even free used USB address (it would be dangerous if tis driver
    285  * is still running).
     289 * @param[in] port Port instance to use.
     290 * @return Error code.
    286291 */
    287292int uhci_port_remove_device(uhci_port_t *port)
    288293{
    289         usb_log_error("%s: Don't know how to remove device %" PRIun ".\n",
    290             port->id_string, port->attached_device);
    291         port->attached_device = 0;
    292         return ENOTSUP;
     294        assert(port);
     295        /* There is nothing to remove. */
     296        if (port->attached_device.fun == NULL) {
     297                usb_log_warning("%s: Removed a ghost device.\n",
     298                    port->id_string);
     299                assert(port->attached_device.address == -1);
     300                return EOK;
     301        }
     302
     303        usb_log_debug("%s: Removing device.\n", port->id_string);
     304
     305        /* Stop driver first */
     306        int ret = ddf_fun_unbind(port->attached_device.fun);
     307        if (ret != EOK) {
     308                usb_log_error("%s: Failed to remove child function: %s.\n",
     309                   port->id_string, str_error(ret));
     310                return ret;
     311        }
     312        ddf_fun_destroy(port->attached_device.fun);
     313        port->attached_device.fun = NULL;
     314
     315        /* Driver stopped, free used address */
     316        ret = usb_hc_unregister_device(&port->hc_connection,
     317            port->attached_device.address);
     318        if (ret != EOK) {
     319                usb_log_error("%s: Failed to unregister address of removed "
     320                    "device: %s.\n", port->id_string, str_error(ret));
     321                return ret;
     322        }
     323        port->attached_device.address = -1;
     324
     325        usb_log_info("%s: Removed attached device.\n", port->id_string);
     326        return EOK;
    293327}
    294328/*----------------------------------------------------------------------------*/

  • uspace/drv/bus/usb/uhcirh/port.h

    r6d4d883 r2ac7af3  
    3939#include <ddf/driver.h>
    4040#include <usb/hc.h> /* usb_hc_connection_t */
     41#include <usb/dev/hub.h>
    4142
    4243typedef uint16_t port_status_t;
    … …  
    6263        usb_hc_connection_t hc_connection;
    6364        ddf_dev_t *rh;
    64         devman_handle_t attached_device;
     65        usb_hub_attached_device_t attached_device;
    6566        fid_t checker;
    6667} uhci_port_t;

  • uspace/drv/bus/usb/usbflbk/main.c

    r6d4d883 r2ac7af3  
    4646 * @return Error code.
    4747 */
    48 static int usbfallback_add_device(usb_device_t *dev)
     48static int usbfallback_device_add(usb_device_t *dev)
    4949{
    5050        int rc;
    … …  
    7474/** USB fallback driver ops. */
    7575static usb_driver_ops_t usbfallback_driver_ops = {
    76         .add_device = usbfallback_add_device,
     76        .device_add = usbfallback_device_add,
    7777};
    7878

  • uspace/drv/bus/usb/usbhid/main.c

    r6d4d883 r2ac7af3  
    150150 * @retval EREFUSED if the device is not supported.
    151151 */
    152 static int usb_hid_add_device(usb_device_t *dev)
     152static int usb_hid_device_add(usb_device_t *dev)
    153153{
    154         usb_log_debug("usb_hid_add_device()\n");
     154        usb_log_debug("usb_hid_device_add()\n");
    155155       
    156156        if (dev == NULL) {
    … …  
    185185 * supports unplug, more callbacks will be added. */
    186186static usb_driver_ops_t usb_hid_driver_ops = {
    187         .add_device = usb_hid_add_device,
     187        .device_add = usb_hid_device_add,
    188188};
    189189

  • uspace/drv/bus/usb/usbhub/main.c

    r6d4d883 r2ac7af3  
    5959 * USB hub driver operations
    6060 *
    61  * The most important one is add_device, which is set to usb_hub_add_device.
     61 * The most important one is device_add, which is set to usb_hub_device_add.
    6262 */
    6363static usb_driver_ops_t usb_hub_driver_ops = {
    64         .add_device = usb_hub_add_device
     64        .device_add = usb_hub_device_add,
     65        .device_gone = usb_hub_device_gone,
    6566};
    6667

  • uspace/drv/bus/usb/usbhub/port.c

    r6d4d883 r2ac7af3  
    5050/** Information for fibril for device discovery. */
    5151struct add_device_phase1 {
    52         usb_hub_info_t *hub;
     52        usb_hub_dev_t *hub;
    5353        usb_hub_port_t *port;
    5454        usb_speed_t speed;
    5555};
    5656
    57 static void usb_hub_port_removed_device(usb_hub_port_t *port,
    58     usb_hub_info_t *hub);
     57static int usb_hub_port_device_gone(usb_hub_port_t *port, usb_hub_dev_t *hub);
    5958static void usb_hub_port_reset_completed(usb_hub_port_t *port,
    6059    usb_port_status_t status);
    6160static int get_port_status(usb_hub_port_t *port, usb_port_status_t *status);
    62 static int enable_port_callback(int port_no, void *arg);
     61static int enable_port_callback(void *arg);
    6362static int add_device_phase1_worker_fibril(void *arg);
    64 static int create_add_device_fibril(usb_hub_port_t *port, usb_hub_info_t *hub,
     63static int create_add_device_fibril(usb_hub_port_t *port, usb_hub_dev_t *hub,
    6564    usb_speed_t speed);
    6665
     66int usb_hub_port_fini(usb_hub_port_t *port, usb_hub_dev_t *hub)
     67{
     68        assert(port);
     69        if (port->attached_device.fun)
     70                return usb_hub_port_device_gone(port, hub);
     71        return EOK;
     72}
     73/*----------------------------------------------------------------------------*/
    6774/**
    6875 * Clear feature on hub port.
    6976 *
    70  * @param hc Host controller telephone
    71  * @param address Hub address
    72  * @param port_index Port
    73  * @param feature Feature selector
     77 * @param port Port structure.
     78 * @param feature Feature selector.
    7479 * @return Operation result
    7580 */
    … …  
    7883{
    7984        assert(port);
    80         usb_device_request_setup_packet_t clear_request = {
     85        const usb_device_request_setup_packet_t clear_request = {
    8186                .request_type = USB_HUB_REQ_TYPE_CLEAR_PORT_FEATURE,
    8287                .request = USB_DEVREQ_CLEAR_FEATURE,
    … …  
    9095/*----------------------------------------------------------------------------*/
    9196/**
    92  * Clear feature on hub port.
    93  *
    94  * @param hc Host controller telephone
    95  * @param address Hub address
    96  * @param port_index Port
    97  * @param feature Feature selector
     97 * Set feature on hub port.
     98 *
     99 * @param port Port structure.
     100 * @param feature Feature selector.
    98101 * @return Operation result
    99102 */
    … …  
    102105{
    103106        assert(port);
    104         usb_device_request_setup_packet_t clear_request = {
     107        const usb_device_request_setup_packet_t clear_request = {
    105108                .request_type = USB_HUB_REQ_TYPE_SET_PORT_FEATURE,
    106109                .request = USB_DEVREQ_SET_FEATURE,
    … …  
    113116}
    114117/*----------------------------------------------------------------------------*/
     118/**
     119 * Mark reset process as failed due to external reasons
     120 *
     121 * @param port Port structure
     122 */
    115123void usb_hub_port_reset_fail(usb_hub_port_t *port)
    116124{
    … …  
    124132/*----------------------------------------------------------------------------*/
    125133/**
    126  * Process interrupts on given hub port
     134 * Process interrupts on given port
    127135 *
    128136 * Accepts connection, over current and port reset change.
     137 * @param port port structure
    129138 * @param hub hub representation
    130  * @param port port number, starting from 1
    131  */
    132 void usb_hub_port_process_interrupt(usb_hub_port_t *port, usb_hub_info_t *hub)
     139 */
     140void usb_hub_port_process_interrupt(usb_hub_port_t *port, usb_hub_dev_t *hub)
    133141{
    134142        assert(port);
    … …  
    171179                         * to that handler, it shall ACK the change too. */
    172180                        if (!(status & USB_HUB_PORT_C_STATUS_ENABLED)) {
    173                                 usb_hub_port_removed_device(port, hub);
     181                                usb_hub_port_device_gone(port, hub);
    174182                        }
    175183                }
    … …  
    180188                usb_log_info("Port %zu, disabled because of errors.\n",
    181189                   port->port_number);
    182                 usb_hub_port_removed_device(port, hub);
     190                usb_hub_port_device_gone(port, hub);
    183191                const int rc = usb_hub_port_clear_feature(port,
    184192                        USB_HUB_FEATURE_C_PORT_ENABLE);
    … …  
    238246            port->port_number, status);
    239247}
    240 
     248/*----------------------------------------------------------------------------*/
    241249/**
    242250 * routine called when a device on port has been removed
    … …  
    245253 * Otherwise does not do anything, because DDF does not allow to remove device
    246254 * from it`s device tree.
     255 * @param port port structure
    247256 * @param hub hub representation
    248  * @param port port number, starting from 1
    249  */
    250 static void usb_hub_port_removed_device(usb_hub_port_t *port,
    251     usb_hub_info_t *hub)
     257 */
     258int usb_hub_port_device_gone(usb_hub_port_t *port, usb_hub_dev_t *hub)
    252259{
    253260        assert(port);
    254261        assert(hub);
    255         if (port->attached_device.address >= 0) {
    256                 fibril_mutex_lock(&port->mutex);
    257                 port->attached_device.address = -1;
    258                 port->attached_device.handle = 0;
    259                 fibril_mutex_unlock(&port->mutex);
    260                 usb_log_info("Removed device on port %zu.\n",
    261                     port->port_number);
    262         } else {
     262        if (port->attached_device.address < 0) {
    263263                usb_log_warning(
    264264                    "Device on port %zu removed before being registered.\n",
    … …  
    271271                 */
    272272                usb_hub_port_reset_fail(port);
    273         }
    274 }
    275 
     273                return EOK;
     274        }
     275
     276        fibril_mutex_lock(&port->mutex);
     277        assert(port->attached_device.fun);
     278        usb_log_debug("Removing device on port %zu.\n", port->port_number);
     279        int ret = ddf_fun_unbind(port->attached_device.fun);
     280        if (ret != EOK) {
     281                usb_log_error("Failed to unbind child function on port"
     282                    " %zu: %s.\n", port->port_number, str_error(ret));
     283                fibril_mutex_unlock(&port->mutex);
     284                return ret;
     285        }
     286
     287        ddf_fun_destroy(port->attached_device.fun);
     288        port->attached_device.fun = NULL;
     289
     290        ret = usb_hc_unregister_device(&hub->connection,
     291            port->attached_device.address);
     292        if (ret != EOK) {
     293                usb_log_warning("Failed to unregister address of the removed "
     294                    "device: %s.\n", str_error(ret));
     295        }
     296        port->attached_device.address = -1;
     297        fibril_mutex_unlock(&port->mutex);
     298        usb_log_info("Removed device on port %zu.\n", port->port_number);
     299        return EOK;
     300}
     301/*----------------------------------------------------------------------------*/
    276302/**
    277303 * Process port reset change
    … …  
    279305 * After this change port should be enabled, unless some problem occurred.
    280306 * This functions triggers second phase of enabling new device.
    281  * @param hub
    282  * @param port
    283  * @param status
    284  */
    285 static void usb_hub_port_reset_completed(usb_hub_port_t *port,
     307 * @param port Port structure
     308 * @param status Port status mask
     309 */
     310void usb_hub_port_reset_completed(usb_hub_port_t *port,
    286311    usb_port_status_t status)
    287312{
    … …  
    313338/** Retrieve port status.
    314339 *
    315  * @param[in] ctrl_pipe Control pipe to use.
    316  * @param[in] port Port number (starting at 1).
     340 * @param[in] port Port structure
    317341 * @param[out] status Where to store the port status.
    318342 * @return Error code.
    … …  
    358382 *
    359383 * @param port_no Port number (starting at 1).
    360  * @param arg Custom argument, points to @c usb_hub_info_t.
     384 * @param arg Custom argument, points to @c usb_hub_dev_t.
    361385 * @return Error code.
    362386 */
    363 static int enable_port_callback(int port_no, void *arg)
     387static int enable_port_callback(void *arg)
    364388{
    365389        usb_hub_port_t *port = arg;
    … …  
    380404        fibril_mutex_unlock(&port->mutex);
    381405
    382         if (port->reset_okay) {
    383                 return EOK;
    384         } else {
    385                 return ESTALL;
    386         }
    387 }
    388 
     406        return port->reset_okay ? EOK : ESTALL;
     407}
     408/*----------------------------------------------------------------------------*/
    389409/** Fibril for adding a new device.
    390410 *
    … …  
    395415 * @return 0 Always.
    396416 */
    397 static int add_device_phase1_worker_fibril(void *arg)
     417int add_device_phase1_worker_fibril(void *arg)
    398418{
    399419        struct add_device_phase1 *data = arg;
    … …  
    401421
    402422        usb_address_t new_address;
    403         devman_handle_t child_handle;
     423        ddf_fun_t *child_fun;
    404424
    405425        const int rc = usb_hc_new_device_wrapper(data->hub->usb_device->ddf_dev,
    406             &data->hub->connection, data->speed,
    407             enable_port_callback, (int) data->port->port_number,
    408             data->port, &new_address, &child_handle,
    409             NULL, NULL, NULL);
     426            &data->hub->connection, data->speed, enable_port_callback,
     427            data->port, &new_address, NULL, NULL, &child_fun);
    410428
    411429        if (rc != EOK) {
    … …  
    416434
    417435        fibril_mutex_lock(&data->port->mutex);
    418         data->port->attached_device.handle = child_handle;
     436        data->port->attached_device.fun = child_fun;
    419437        data->port->attached_device.address = new_address;
    420438        fibril_mutex_unlock(&data->port->mutex);
    … …  
    423441            "address %d (handle %" PRIun ").\n",
    424442            data->hub->usb_device->ddf_dev->name, data->port->port_number,
    425             new_address, child_handle);
     443            new_address, child_fun->handle);
    426444
    427445leave:
    … …  
    434452        free(arg);
    435453
    436         return EOK;
    437 }
    438 
     454        return rc;
     455}
     456/*----------------------------------------------------------------------------*/
    439457/** Start device adding when connection change is detected.
    440458 *
    … …  
    446464 * @return Error code.
    447465 */
    448 static int create_add_device_fibril(usb_hub_port_t *port, usb_hub_info_t *hub,
     466static int create_add_device_fibril(usb_hub_port_t *port, usb_hub_dev_t *hub,
    449467    usb_speed_t speed)
    450468{
    … …  
    452470        assert(port);
    453471        struct add_device_phase1 *data
    454             = malloc(sizeof (struct add_device_phase1));
     472            = malloc(sizeof(struct add_device_phase1));
    455473        if (data == NULL) {
    456474                return ENOMEM;

  • uspace/drv/bus/usb/usbhub/port.h

    r6d4d883 r2ac7af3  
    4040#include <usb/classes/hub.h>
    4141
    42 typedef struct usb_hub_info_t usb_hub_info_t;
     42typedef struct usb_hub_dev usb_hub_dev_t;
    4343
    4444/** Information about single port on a hub. */
    … …  
    5858
    5959        /** Information about attached device. */
    60         usb_hc_attached_device_t attached_device;
     60        usb_hub_attached_device_t attached_device;
    6161} usb_hub_port_t;
    6262
    … …  
    7070        assert(port);
    7171        port->attached_device.address = -1;
    72         port->attached_device.handle = 0;
     72        port->attached_device.fun = NULL;
    7373        port->port_number = port_number;
    7474        port->control_pipe = control_pipe;
    … …  
    7676        fibril_condvar_initialize(&port->reset_cv);
    7777}
    78 
    79 void usb_hub_port_reset_fail(usb_hub_port_t *port);
    80 void usb_hub_port_process_interrupt(usb_hub_port_t *port, usb_hub_info_t *hub);
     78int usb_hub_port_fini(usb_hub_port_t *port, usb_hub_dev_t *hub);
    8179int usb_hub_port_clear_feature(
    8280    usb_hub_port_t *port, usb_hub_class_feature_t feature);
    8381int usb_hub_port_set_feature(
    8482    usb_hub_port_t *port, usb_hub_class_feature_t feature);
     83void usb_hub_port_reset_fail(usb_hub_port_t *port);
     84void usb_hub_port_process_interrupt(usb_hub_port_t *port, usb_hub_dev_t *hub);
    8585
    8686#endif

  • uspace/drv/bus/usb/usbhub/usbhub.c

    r6d4d883 r2ac7af3  
    6868
    6969static int usb_set_first_configuration(usb_device_t *usb_device);
    70 static usb_hub_info_t * usb_hub_info_create(usb_device_t *usb_dev);
    71 static int usb_hub_process_hub_specific_info(usb_hub_info_t *hub_info);
    72 static void usb_hub_over_current(const usb_hub_info_t *hub_info,
     70static usb_hub_dev_t * usb_hub_dev_create(usb_device_t *usb_dev);
     71static int usb_hub_process_hub_specific_info(usb_hub_dev_t *hub_dev);
     72static void usb_hub_over_current(const usb_hub_dev_t *hub_dev,
    7373    usb_hub_status_t status);
    74 static void usb_hub_global_interrupt(const usb_hub_info_t *hub_info);
     74static void usb_hub_global_interrupt(const usb_hub_dev_t *hub_dev);
    7575static void usb_hub_polling_terminated_callback(usb_device_t *device,
    7676    bool was_error, void *data);
    77 
    7877/**
    7978 * Initialize hub device driver fibril
    … …  
    8483 * @return error code
    8584 */
    86 int usb_hub_add_device(usb_device_t *usb_dev)
     85int usb_hub_device_gone(usb_device_t *usb_dev)
     86{
     87        assert(usb_dev);
     88        usb_hub_dev_t *hub = usb_dev->driver_data;
     89        assert(hub);
     90        unsigned tries = 10;
     91        while (hub->running) {
     92                async_usleep(100000);
     93                if (!tries--) {
     94                        usb_log_error("Can't remove hub, still running.\n");
     95                        return EINPROGRESS;
     96                }
     97        }
     98
     99        assert(!hub->running);
     100
     101        for (size_t port = 0; port < hub->port_count; ++port) {
     102                if (hub->ports[port].attached_device.fun) {
     103                        const int ret =
     104                            usb_hub_port_fini(&hub->ports[port], hub);
     105                        if (ret != EOK)
     106                                return ret;
     107                }
     108        }
     109        free(hub->ports);
     110
     111        const int ret = ddf_fun_unbind(hub->hub_fun);
     112        if (ret != EOK) {
     113                usb_log_error("Failed to unbind '%s' function: %s.\n",
     114                   HUB_FNC_NAME, str_error(ret));
     115                return ret;
     116        }
     117        ddf_fun_destroy(hub->hub_fun);
     118
     119        free(hub);
     120        usb_dev->driver_data = NULL;
     121        usb_log_info("USB hub driver, stopped and cleaned.\n");
     122        return EOK;
     123}
     124/*----------------------------------------------------------------------------*/
     125/**
     126 * Initialize hub device driver fibril
     127 *
     128 * Creates hub representation and fibril that periodically checks hub's status.
     129 * Hub representation is passed to the fibril.
     130 * @param usb_dev generic usb device information
     131 * @return error code
     132 */
     133int usb_hub_device_add(usb_device_t *usb_dev)
    87134{
    88135        assert(usb_dev);
    89136        /* Create driver soft-state structure */
    90         usb_hub_info_t *hub_info = usb_hub_info_create(usb_dev);
    91         if (hub_info == NULL) {
     137        usb_hub_dev_t *hub_dev = usb_hub_dev_create(usb_dev);
     138        if (hub_dev == NULL) {
    92139                usb_log_error("Failed to create hun driver structure.\n");
    93140                return ENOMEM;
    … …  
    97144        usb_log_debug("Initializing USB wire abstraction.\n");
    98145        int opResult = usb_hc_connection_initialize_from_device(
    99             &hub_info->connection, hub_info->usb_device->ddf_dev);
     146            &hub_dev->connection, hub_dev->usb_device->ddf_dev);
    100147        if (opResult != EOK) {
    101148                usb_log_error("Could not initialize connection to device: %s\n",
    102149                    str_error(opResult));
    103                 free(hub_info);
     150                free(hub_dev);
    104151                return opResult;
    105152        }
    … …  
    110157                usb_log_error("Could not set hub configuration: %s\n",
    111158                    str_error(opResult));
    112                 free(hub_info);
     159                free(hub_dev);
    113160                return opResult;
    114161        }
    115162
    116         //get port count and create attached_devs
    117         opResult = usb_hub_process_hub_specific_info(hub_info);
     163        /* Get port count and create attached_devices. */
     164        opResult = usb_hub_process_hub_specific_info(hub_dev);
    118165        if (opResult != EOK) {
    119166                usb_log_error("Could process hub specific info, %s\n",
    120167                    str_error(opResult));
    121                 free(hub_info);
     168                free(hub_dev);
    122169                return opResult;
    123170        }
    124171
    125172        usb_log_debug("Creating DDF function '" HUB_FNC_NAME "'.\n");
    126         ddf_fun_t *hub_fun = ddf_fun_create(hub_info->usb_device->ddf_dev,
     173        hub_dev->hub_fun = ddf_fun_create(hub_dev->usb_device->ddf_dev,
    127174            fun_exposed, HUB_FNC_NAME);
    128         if (hub_fun == NULL) {
     175        if (hub_dev->hub_fun == NULL) {
    129176                usb_log_error("Failed to create hub function.\n");
    130                 free(hub_info);
     177                free(hub_dev);
    131178                return ENOMEM;
    132179        }
    133180
    134         opResult = ddf_fun_bind(hub_fun);
     181        opResult = ddf_fun_bind(hub_dev->hub_fun);
    135182        if (opResult != EOK) {
    136183                usb_log_error("Failed to bind hub function: %s.\n",
    137184                   str_error(opResult));
    138                 free(hub_info);
    139                 ddf_fun_destroy(hub_fun);
     185                free(hub_dev);
     186                ddf_fun_destroy(hub_dev->hub_fun);
    140187                return opResult;
    141188        }
    142189
    143         opResult = usb_device_auto_poll(hub_info->usb_device, 0,
    144             hub_port_changes_callback, ((hub_info->port_count + 1) / 8) + 1,
    145             usb_hub_polling_terminated_callback, hub_info);
    146         if (opResult != EOK) {
    147                 ddf_fun_destroy(hub_fun);
    148                 free(hub_info);
     190        opResult = usb_device_auto_poll(hub_dev->usb_device, 0,
     191            hub_port_changes_callback, ((hub_dev->port_count + 1 + 8) / 8),
     192            usb_hub_polling_terminated_callback, hub_dev);
     193        if (opResult != EOK) {
     194                /* Function is already bound */
     195                ddf_fun_unbind(hub_dev->hub_fun);
     196                ddf_fun_destroy(hub_dev->hub_fun);
     197                free(hub_dev);
    149198                usb_log_error("Failed to create polling fibril: %s.\n",
    150199                    str_error(opResult));
    151200                return opResult;
    152201        }
     202        hub_dev->running = true;
    153203        usb_log_info("Controlling hub '%s' (%zu ports).\n",
    154             hub_info->usb_device->ddf_dev->name, hub_info->port_count);
     204            hub_dev->usb_device->ddf_dev->name, hub_dev->port_count);
    155205
    156206        return EOK;
    … …  
    162212 * @param change_bitmap Bitmap of changed ports.
    163213 * @param change_bitmap_size Size of the bitmap in bytes.
    164  * @param arg Custom argument, points to @c usb_hub_info_t.
     214 * @param arg Custom argument, points to @c usb_hub_dev_t.
    165215 * @return Whether to continue polling.
    166216 */
    … …  
    169219{
    170220        usb_log_debug("hub_port_changes_callback\n");
    171         usb_hub_info_t *hub = arg;
     221        usb_hub_dev_t *hub = arg;
    172222        assert(hub);
    173223
    … …  
    184234
    185235        /* N + 1 bit indicates change on port N */
    186         size_t port = 1;
    187         for (; port < hub->port_count + 1; port++) {
    188                 const bool change = (change_bitmap[port / 8] >> (port % 8)) & 1;
     236        for (size_t port = 0; port < hub->port_count + 1; port++) {
     237                const size_t bit = port + 1;
     238                const bool change = (change_bitmap[bit / 8] >> (bit % 8)) & 1;
    189239                if (change) {
    190240                        usb_hub_port_process_interrupt(&hub->ports[port], hub);
    … …  
    195245/*----------------------------------------------------------------------------*/
    196246/**
    197  * create usb_hub_info_t structure
     247 * create usb_hub_dev_t structure
    198248 *
    199249 * Does only basic copying of known information into new structure.
    200250 * @param usb_dev usb device structure
    201  * @return basic usb_hub_info_t structure
    202  */
    203 static usb_hub_info_t * usb_hub_info_create(usb_device_t *usb_dev)
     251 * @return basic usb_hub_dev_t structure
     252 */
     253static usb_hub_dev_t * usb_hub_dev_create(usb_device_t *usb_dev)
    204254{
    205255        assert(usb_dev);
    206         usb_hub_info_t *info = malloc(sizeof(usb_hub_info_t));
    207         if (!info)
     256        usb_hub_dev_t *hub_dev = malloc(sizeof(usb_hub_dev_t));
     257        if (!hub_dev)
    208258            return NULL;
    209259
    210         info->usb_device = usb_dev;
    211 
    212         info->ports = NULL;
    213         info->port_count = -1;
    214         fibril_mutex_initialize(&info->pending_ops_mutex);
    215         fibril_condvar_initialize(&info->pending_ops_cv);
    216         info->pending_ops_count = 0;
    217 
    218         return info;
    219 }
    220 /*----------------------------------------------------------------------------*/
    221 /**
    222  * Load hub-specific information into hub_info structure and process if needed
     260        hub_dev->usb_device = usb_dev;
     261
     262        hub_dev->ports = NULL;
     263        hub_dev->port_count = 0;
     264        hub_dev->pending_ops_count = 0;
     265        hub_dev->running = false;
     266        fibril_mutex_initialize(&hub_dev->pending_ops_mutex);
     267        fibril_condvar_initialize(&hub_dev->pending_ops_cv);
     268        usb_dev->driver_data = hub_dev;
     269
     270        return hub_dev;
     271}
     272/*----------------------------------------------------------------------------*/
     273/**
     274 * Load hub-specific information into hub_dev structure and process if needed
    223275 *
    224276 * Read port count and initialize structures holding per port information.
    … …  
    226278 * This function is hub-specific and should be run only after the hub is
    227279 * configured using usb_set_first_configuration function.
    228  * @param hub_info hub representation
     280 * @param hub_dev hub representation
    229281 * @return error code
    230282 */
    231 static int usb_hub_process_hub_specific_info(usb_hub_info_t *hub_info)
    232 {
    233         assert(hub_info);
     283static int usb_hub_process_hub_specific_info(usb_hub_dev_t *hub_dev)
     284{
     285        assert(hub_dev);
    234286
    235287        /* Get hub descriptor. */
    236288        usb_log_debug("Retrieving descriptor\n");
    237         usb_pipe_t *control_pipe = &hub_info->usb_device->ctrl_pipe;
     289        usb_pipe_t *control_pipe = &hub_dev->usb_device->ctrl_pipe;
    238290
    239291        usb_hub_descriptor_header_t descriptor;
    … …  
    242294            USB_REQUEST_TYPE_CLASS, USB_REQUEST_RECIPIENT_DEVICE,
    243295            USB_DESCTYPE_HUB, 0, 0, &descriptor,
    244             sizeof(usb_hub_descriptor_t), &received_size);
     296            sizeof(usb_hub_descriptor_header_t), &received_size);
    245297        if (opResult != EOK) {
    246298                usb_log_error("Failed to receive hub descriptor: %s.\n",
    … …  
    250302
    251303        usb_log_debug("Setting port count to %d.\n", descriptor.port_count);
    252         hub_info->port_count = descriptor.port_count;
    253 
    254         // TODO: +1 hack is no longer necessary
    255         hub_info->ports =
    256             malloc(sizeof(usb_hub_port_t) * (hub_info->port_count + 1));
    257         if (!hub_info->ports) {
     304        hub_dev->port_count = descriptor.port_count;
     305
     306        hub_dev->ports = calloc(hub_dev->port_count, sizeof(usb_hub_port_t));
     307        if (!hub_dev->ports) {
    258308                return ENOMEM;
    259309        }
    260310
    261         size_t port;
    262         for (port = 0; port < hub_info->port_count + 1; ++port) {
    263                 usb_hub_port_init(&hub_info->ports[port], port, control_pipe);
     311        for (size_t port = 0; port < hub_dev->port_count; ++port) {
     312                usb_hub_port_init(
     313                    &hub_dev->ports[port], port + 1, control_pipe);
    264314        }
    265315
    … …  
    271321                    & HUB_CHAR_POWER_PER_PORT_FLAG;
    272322
    273                 for (port = 1; port <= hub_info->port_count; ++port) {
     323                for (size_t port = 0; port < hub_dev->port_count; ++port) {
    274324                        usb_log_debug("Powering port %zu.\n", port);
    275325                        opResult = usb_hub_port_set_feature(
    276                             &hub_info->ports[port], USB_HUB_FEATURE_PORT_POWER);
     326                            &hub_dev->ports[port], USB_HUB_FEATURE_PORT_POWER);
    277327                        if (opResult != EOK) {
    278328                                usb_log_error("Cannot power on port %zu: %s.\n",
    … …  
    314364        }
    315365
    316         // TODO: Make sure that there is enough data and the cast is correct
     366        if (usb_device->descriptors.configuration_size
     367            < sizeof(usb_standard_configuration_descriptor_t)) {
     368            usb_log_error("Configuration descriptor is not big enough"
     369                " to fit standard configuration descriptor.\n");
     370            return EOVERFLOW;
     371        }
     372
     373        // TODO: Make sure that the cast is correct
    317374        usb_standard_configuration_descriptor_t *config_descriptor
    318375            = (usb_standard_configuration_descriptor_t *)
    … …  
    337394 *
    338395 * This means either to power off the hub or power it on.
    339  * @param hub_info hub instance
     396 * @param hub_dev hub instance
    340397 * @param status hub status bitmask
    341398 * @return error code
    342399 */
    343 static void usb_hub_over_current(const usb_hub_info_t *hub_info,
     400static void usb_hub_over_current(const usb_hub_dev_t *hub_dev,
    344401    usb_hub_status_t status)
    345402{
    … …  
    351408                /* Over-current condition is gone, it is safe to turn the
    352409                 * ports on. */
    353                 size_t port;
    354                 for (port = 1; port <= hub_info->port_count; ++port) {
     410                for (size_t port = 0; port < hub_dev->port_count; ++port) {
    355411                        const int opResult = usb_hub_port_set_feature(
    356                             &hub_info->ports[port], USB_HUB_FEATURE_PORT_POWER);
     412                            &hub_dev->ports[port], USB_HUB_FEATURE_PORT_POWER);
     413                        // TODO: consider power policy here
    357414                        if (opResult != EOK) {
    358415                                usb_log_warning(
    … …  
    364421        }
    365422        const int opResult = usb_request_clear_feature(
    366             &hub_info->usb_device->ctrl_pipe, USB_REQUEST_TYPE_CLASS,
     423            &hub_dev->usb_device->ctrl_pipe, USB_REQUEST_TYPE_CLASS,
    367424            USB_REQUEST_RECIPIENT_DEVICE,
    368425            USB_HUB_FEATURE_C_HUB_LOCAL_POWER, 0);
    … …  
    378435 *
    379436 * The change can be either in the over-current condition or local-power change.
    380  * @param hub_info hub instance
    381  */
    382 static void usb_hub_global_interrupt(const usb_hub_info_t *hub_info)
    383 {
    384         assert(hub_info);
    385         assert(hub_info->usb_device);
     437 * @param hub_dev hub instance
     438 */
     439static void usb_hub_global_interrupt(const usb_hub_dev_t *hub_dev)
     440{
     441        assert(hub_dev);
     442        assert(hub_dev->usb_device);
    386443        usb_log_debug("Global interrupt on a hub\n");
    387         usb_pipe_t *control_pipe = &hub_info->usb_device->ctrl_pipe;
     444        usb_pipe_t *control_pipe = &hub_dev->usb_device->ctrl_pipe;
    388445
    389446        usb_hub_status_t status;
    … …  
    406463        /* Handle status changes */
    407464        if (status & USB_HUB_STATUS_C_OVER_CURRENT) {
    408                 usb_hub_over_current(hub_info, status);
     465                usb_hub_over_current(hub_dev, status);
    409466        }
    410467
    … …  
    438495 * callback called from hub polling fibril when the fibril terminates
    439496 *
    440  * Should perform a cleanup - deletes hub_info.
     497 * Does not perform cleanup, just marks the hub as not running.
    441498 * @param device usb device afected
    442499 * @param was_error indicates that the fibril is stoped due to an error
    443  * @param data pointer to usb_hub_info_t structure
     500 * @param data pointer to usb_hub_dev_t structure
    444501 */
    445502static void usb_hub_polling_terminated_callback(usb_device_t *device,
    446503    bool was_error, void *data)
    447504{
    448         usb_hub_info_t *hub = data;
     505        usb_hub_dev_t *hub = data;
    449506        assert(hub);
    450507
    … …  
    460517         */
    461518        if (hub->pending_ops_count > 0) {
    462                 size_t port;
    463                 for (port = 0; port < hub->port_count; port++) {
     519                for (size_t port = 0; port < hub->port_count; ++port) {
    464520                        usb_hub_port_reset_fail(&hub->ports[port]);
    465521                }
    … …  
    471527        }
    472528        fibril_mutex_unlock(&hub->pending_ops_mutex);
    473 
    474         usb_device_destroy(hub->usb_device);
    475 
    476         free(hub->ports);
    477         free(hub);
     529        hub->running = false;
    478530}
    479531/**

  • uspace/drv/bus/usb/usbhub/usbhub.h

    r6d4d883 r2ac7af3  
    5252
    5353/** Information about attached hub. */
    54 struct usb_hub_info_t {
     54struct usb_hub_dev {
    5555        /** Number of ports. */
    5656        size_t port_count;
    57 
    58         /** Attached device handles, for each port one */
     57        /** Port structures, one for each port */
    5958        usb_hub_port_t *ports;
    60 
    6159        /** Connection to hcd */
    6260        usb_hc_connection_t connection;
    63 
    6461        /** Generic usb device data*/
    6562        usb_device_t *usb_device;
    … …  
    7673        /** Condition variable for pending_ops_count. */
    7774        fibril_condvar_t pending_ops_cv;
     75        /** Pointer to devman usbhub function. */
     76        ddf_fun_t *hub_fun;
     77        /** Status indicator */
     78        bool running;
    7879};
    7980
    80 int usb_hub_add_device(usb_device_t *usb_dev);
     81int usb_hub_device_add(usb_device_t *usb_dev);
     82int usb_hub_device_gone(usb_device_t *usb_dev);
    8183
    8284bool hub_port_changes_callback(usb_device_t *dev,

  • uspace/drv/bus/usb/usbmast/main.c

    r6d4d883 r2ac7af3  
    8787 * @return Error code.
    8888 */
    89 static int usbmast_add_device(usb_device_t *dev)
     89static int usbmast_device_add(usb_device_t *dev)
    9090{
    9191        int rc;
    … …  
    9494
    9595        /* Allocate softstate */
    96         mdev = ddf_dev_data_alloc(dev->ddf_dev, sizeof(usbmast_dev_t));
     96        dev->driver_data = mdev = malloc(sizeof(usbmast_dev_t));
    9797        if (mdev == NULL) {
    9898                usb_log_error("Failed allocating softstate.\n");
    … …  
    103103        mdev->usb_dev = dev;
    104104
    105         usb_log_info("Initializing mass storage `%s'.\n",
    106             dev->ddf_dev->name);
     105        usb_log_info("Initializing mass storage `%s'.\n", dev->ddf_dev->name);
    107106        usb_log_debug(" Bulk in endpoint: %d [%zuB].\n",
    108107            dev->pipes[BULK_IN_EP].pipe->endpoint_no,
    … …  
    295294/** USB mass storage driver ops. */
    296295static usb_driver_ops_t usbmast_driver_ops = {
    297         .add_device = usbmast_add_device,
     296        .device_add = usbmast_device_add,
    298297};
    299298

  • uspace/drv/bus/usb/usbmid/main.c

    r6d4d883 r2ac7af3  
    4949 * @return Error code.
    5050 */
    51 static int usbmid_add_device(usb_device_t *dev)
     51static int usbmid_device_add(usb_device_t *dev)
    5252{
    5353        usb_log_info("Taking care of new MID `%s'.\n", dev->ddf_dev->name);
    … …  
    6868/** USB MID driver ops. */
    6969static usb_driver_ops_t mid_driver_ops = {
    70         .add_device = usbmid_add_device,
     70        .device_add = usbmid_device_add,
    7171};
    7272

  • uspace/drv/bus/usb/usbmouse/main.c

    r6d4d883 r2ac7af3  
    5050 *
    5151 */
    52 static int usbmouse_add_device(usb_device_t *dev)
     52static int usbmouse_device_add(usb_device_t *dev)
    5353{
    5454        int rc = usb_mouse_create(dev);
    … …  
    8080/** USB mouse driver ops. */
    8181static usb_driver_ops_t mouse_driver_ops = {
    82         .add_device = usbmouse_add_device,
     82        .device_add = usbmouse_device_add,
    8383};
    8484

  • uspace/drv/bus/usb/vhc/hub.c

    r6d4d883 r2ac7af3  
    8181}
    8282
    83 static int pretend_port_rest(int unused, void *unused2)
     83static int pretend_port_rest(void *unused2)
    8484{
    8585        return EOK;
    … …  
    114114
    115115        ddf_fun_t *hub_dev;
    116         rc = usb_hc_new_device_wrapper(hc_dev->dev, &hc_conn,
    117             USB_SPEED_FULL,
    118             pretend_port_rest, 0, NULL,
    119             NULL, NULL, &rh_ops, hc_dev, &hub_dev);
     116        rc = usb_hc_new_device_wrapper(hc_dev->dev, &hc_conn, USB_SPEED_FULL,
     117            pretend_port_rest, NULL, NULL, &rh_ops, hc_dev, &hub_dev);
    120118        if (rc != EOK) {
    121119                usb_log_fatal("Failed to create root hub: %s.\n",
Note: See TracChangeset for help on using the changeset viewer.