| 1 | = Linux `dmesg` output from OpenMoko Neo Freerunner boot = |
| 2 | |
| 3 | {{{ |
| 4 | [ 0.000000] Initializing cgroup subsys cpuset |
| 5 | [ 0.000000] Initializing cgroup subsys cpu |
| 6 | [ 0.000000] Linux version 2.6.39.4 (bitbake@opmbuild) (gcc version 4.7.2 (GCC) ) #1 Fri Nov 23 19:07:25 CET 2012 |
| 7 | [ 0.000000] CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177 |
| 8 | [ 0.000000] CPU: VIVT data cache, VIVT instruction cache |
| 9 | [ 0.000000] Machine: GTA02 |
| 10 | [ 0.000000] Memory policy: ECC disabled, Data cache writeback |
| 11 | [ 0.000000] BUG: mapping for 0x19000000 at 0xe0000000 overlaps vmalloc space |
| 12 | [ 0.000000] CPU S3C2442B (id 0x32440aab) |
| 13 | [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics |
| 14 | [ 0.000000] S3C244X: core 400.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz |
| 15 | [ 0.000000] CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on |
| 16 | [ 0.000000] On node 0 totalpages: 32768 |
| 17 | [ 0.000000] free_area_init_node: node 0, pgdat c03a4ab8, node_mem_map c03f5000 |
| 18 | [ 0.000000] Normal zone: 256 pages used for memmap |
| 19 | [ 0.000000] Normal zone: 0 pages reserved |
| 20 | [ 0.000000] Normal zone: 32512 pages, LIFO batch:7 |
| 21 | [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 |
| 22 | [ 0.000000] pcpu-alloc: [0] 0 |
| 23 | [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 |
| 24 | [ 0.000000] Kernel command line: rootfstype=jffs2 root=/dev/mtdblock6 console=ttySAC2,115200 console=tty0 loglevel=4 regular_boot mtdparts=physmap-flash:-(nor);neo1973-nand:0x00040000(u-boot),0x00040000(u-boot_env),0x00800000(kernel),0x000a0000(splash),0x00040000(factory),0x0f6a0000(rootfs) |
| 25 | [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) |
| 26 | [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) |
| 27 | [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) |
| 28 | [ 0.000000] Memory: 128MB = 128MB total |
| 29 | [ 0.000000] Memory: 125860k/125860k available, 5212k reserved, 0K highmem |
| 30 | [ 0.000000] Virtual kernel memory layout: |
| 31 | [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) |
| 32 | [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) |
| 33 | [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) |
| 34 | [ 0.000000] vmalloc : 0xc8800000 - 0xf6000000 ( 728 MB) |
| 35 | [ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) |
| 36 | [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) |
| 37 | [ 0.000000] .init : 0xc0008000 - 0xc0026000 ( 120 kB) |
| 38 | [ 0.000000] .text : 0xc0026000 - 0xc0385968 (3455 kB) |
| 39 | [ 0.000000] .data : 0xc0386000 - 0xc03a5160 ( 125 kB) |
| 40 | [ 0.000000] NR_IRQS:85 nr_irqs:85 85 |
| 41 | [ 0.000000] irq: clearing pending ext status 000902f0 |
| 42 | [ 0.000000] irq: clearing pending ext status 000902d0 |
| 43 | [ 0.000000] irq: clearing subpending status 00000087 |
| 44 | [ 0.000000] irq: clearing subpending status 00000082 |
| 45 | [ 0.000000] timer tcon=00500000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8 |
| 46 | [ 0.000000] Console: colour dummy device 80x30 |
| 47 | [ 0.000000] console [tty0] enabled |
| 48 | [ 0.000000] console [ttySAC2] enabled |
| 49 | [ 0.005000] Calibrating delay loop... 199.47 BogoMIPS (lpj=498688) |
| 50 | [ 0.045000] pid_max: default: 32768 minimum: 301 |
| 51 | [ 0.045000] Mount-cache hash table entries: 512 |
| 52 | [ 0.045000] Initializing cgroup subsys ns |
| 53 | [ 0.045000] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. |
| 54 | [ 0.045000] Initializing cgroup subsys cpuacct |
| 55 | [ 0.045000] Initializing cgroup subsys devices |
| 56 | [ 0.045000] Initializing cgroup subsys freezer |
| 57 | [ 0.045000] CPU: Testing write buffer coherency: ok |
| 58 | [ 0.045000] devtmpfs: initialized |
| 59 | [ 0.050000] print_constraints: dummy: |
| 60 | [ 0.050000] NET: Registered protocol family 16 |
| 61 | [ 0.055000] S3C Power Management, Copyright 2004 Simtec Electronics |
| 62 | [ 0.060000] S3C2442: Initialising architecture |
| 63 | [ 0.060000] S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics |
| 64 | [ 0.060000] DMA channel 0 at c8808000, irq 33 |
| 65 | [ 0.060000] DMA channel 1 at c8808040, irq 34 |
| 66 | [ 0.060000] DMA channel 2 at c8808080, irq 35 |
| 67 | [ 0.060000] DMA channel 3 at c88080c0, irq 36 |
| 68 | [ 0.060000] S3C244X: Clock Support, DVS off |
| 69 | [ 0.060000] s3c-adc s3c24xx-adc: attached adc driver |
| 70 | [ 0.060000] s3c24xx-pwm s3c24xx-pwm.0: tin at 25000000, tdiv at 25000000, tin=divclk, base 0 |
| 71 | [ 0.060000] s3c24xx-pwm s3c24xx-pwm.1: tin at 25000000, tdiv at 25000000, tin=divclk, base 8 |
| 72 | [ 0.060000] s3c24xx-pwm s3c24xx-pwm.2: tin at 8333333, tdiv at 8333333, tin=divclk, base 12 |
| 73 | [ 0.060000] s3c24xx-pwm s3c24xx-pwm.3: tin at 8333333, tdiv at 8333333, tin=divclk, base 16 |
| 74 | [ 0.065000] bio: create slab <bio-0> at 0 |
| 75 | [ 0.070000] s3c-i2c s3c2440-i2c: slave address 0x10 |
| 76 | [ 0.070000] s3c-i2c s3c2440-i2c: bus frequency set to 97 KHz |
| 77 | [ 0.080000] pcf50633 0-0073: Probed device version 19 variant 132 |
| 78 | [ 0.110000] wake enabled for irq 53 |
| 79 | [ 0.110000] print_constraints: auto: 3300 mV normal |
| 80 | [ 0.115000] print_constraints: down1: 1300 <--> 1600 mV at 1300 mV normal |
| 81 | [ 0.125000] print_constraints: down2: 1800 mV normal |
| 82 | [ 0.125000] print_constraints: ldo1: 3300 mV normal |
| 83 | [ 0.125000] print_constraints: ldo2: 3300 mV normal |
| 84 | [ 0.125000] print_constraints: ldo3: 3000 mV normal |
| 85 | [ 0.130000] print_constraints: ldo4: 3200 mV normal |
| 86 | [ 0.130000] print_constraints: ldo5: 3000 mV normal |
| 87 | [ 0.130000] print_constraints: ldo6: 3000 mV normal |
| 88 | [ 0.130000] print_constraints: hcldo: 2000 <--> 3300 mV at 3300 mV normal |
| 89 | [ 0.135000] print_constraints: memldo: 1800 mV normal |
| 90 | [ 0.135000] s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter |
| 91 | [ 0.180000] NET: Registered protocol family 2 |
| 92 | [ 0.180000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) |
| 93 | [ 0.180000] TCP established hash table entries: 4096 (order: 3, 32768 bytes) |
| 94 | [ 0.180000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes) |
| 95 | [ 0.180000] TCP: Hash tables configured (established 4096 bind 4096) |
| 96 | [ 0.180000] TCP reno registered |
| 97 | [ 0.180000] UDP hash table entries: 256 (order: 0, 4096 bytes) |
| 98 | [ 0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) |
| 99 | [ 0.185000] NET: Registered protocol family 1 |
| 100 | [ 0.185000] gta02-pm-bt gta02-pm-bt.0: Openmoko Freerunner Bluetooth Power Management: starting |
| 101 | [ 0.185000] gta02-pm-bt gta02-pm-bt.0: __gta02_pm_bt_toggle_radio 1 |
| 102 | [ 0.205000] gta02-pm-gps gta02-pm-gps.0: starting |
| 103 | [ 0.205000] gta02-pm-wlan gta02-pm-wlan.0: starting |
| 104 | [ 0.410000] JFFS2 version 2.2. (NAND) (SUMMARY) \xffffffc2\xffffffa9 2001-2006 Red Hat, Inc. |
| 105 | [ 0.415000] msgmni has been set to 245 |
| 106 | [ 0.415000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) |
| 107 | [ 0.415000] io scheduler noop registered |
| 108 | [ 0.415000] io scheduler deadline registered (default) |
| 109 | [ 0.450000] print_constraints: GSM: 3700 mV normal |
| 110 | [ 0.470000] print_constraints: USBHOST: 3700 mV normal |
| 111 | [ 0.480000] s3c2440-uart.0: ttySAC0 at MMIO 0x50000000 (irq = 70) is a S3C2440 |
| 112 | [ 0.480000] s3c2440-uart.1: ttySAC1 at MMIO 0x50004000 (irq = 73) is a S3C2440 |
| 113 | [ 0.480000] s3c2440-uart.2: ttySAC2 at MMIO 0x50008000 (irq = 76) is a S3C2440 |
| 114 | [ 0.500000] brd: module loaded |
| 115 | [ 0.505000] neo1973-resume neo1973-resume.0: starting |
| 116 | [ 0.545000] SMEDIA Glamo frame buffer driver (C) 2007 Openmoko, Inc. |
| 117 | [ 0.545000] glamo-fb glamo-fb.0: spin_lock_init |
| 118 | [ 0.615000] Console: switching to colour frame buffer device 60x40 |
| 119 | [ 0.675000] fb0: SMedia Glamo frame buffer device |
| 120 | [ 0.675000] glamo3362 glamo3362.0: Glamo core PLL1: 49119232Hz, PLL2: 89980928Hz |
| 121 | [ 0.675000] physmap platform flash device: 00200000 at 18000000 |
| 122 | [ 0.675000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000020 Chip ID 0x008813 |
| 123 | [ 0.680000] Intel/Sharp Extended Query Table at 0x0039 |
| 124 | [ 0.680000] Intel/Sharp Extended Query Table at 0x0039 |
| 125 | [ 0.680000] Intel/Sharp Extended Query Table at 0x0039 |
| 126 | [ 0.680000] Intel/Sharp Extended Query Table at 0x0039 |
| 127 | [ 0.680000] Intel/Sharp Extended Query Table at 0x0039 |
| 128 | [ 0.680000] cfi_cmdset_0001: Erase suspend on write enabled |
| 129 | [ 0.680000] erase region 0: offset=0x0,size=0x2000,blocks=8 |
| 130 | [ 0.680000] erase region 1: offset=0x10000,size=0x10000,blocks=31 |
| 131 | [ 0.680000] physmap-flash.0: 1 set(s) of 1 interleaved chips --> 4 partitions of 512 KiB |
| 132 | [ 0.680000] RedBoot partition parsing not available |
| 133 | [ 0.685000] S3C24XX NAND Driver, (c) 2004 Simtec Electronics |
| 134 | [ 0.685000] s3c24xx-nand s3c2440-nand: Tacls=1, 10ns Twrph0=3 30ns, Twrph1=2 20ns |
| 135 | [ 0.685000] s3c24xx-nand s3c2440-nand: NAND soft ECC |
| 136 | [ 0.685000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xaa (Samsung NAND 256MiB 1,8V 8-bit) |
| 137 | [ 0.685000] 6 cmdlinepart partitions found on MTD device neo1973-nand |
| 138 | [ 0.685000] Creating 6 MTD partitions on "neo1973-nand": |
| 139 | [ 0.685000] 0x000000000000-0x000000040000 : "u-boot" |
| 140 | [ 0.690000] 0x000000040000-0x000000080000 : "u-boot_env" |
| 141 | [ 0.690000] 0x000000080000-0x000000880000 : "kernel" |
| 142 | [ 0.695000] 0x000000880000-0x000000920000 : "splash" |
| 143 | [ 0.700000] 0x000000920000-0x000000960000 : "factory" |
| 144 | [ 0.700000] 0x000000960000-0x000010000000 : "rootfs" |
| 145 | [ 0.925000] mousedev: PS/2 mouse device common for all mice |
| 146 | [ 0.925000] input: gpio-keys as /devices/platform/gpio-keys/input/input0 |
| 147 | [ 0.925000] samsung-ts s3c2440-ts: driver attached, registering input device |
| 148 | [ 0.925000] input: S3C24XX TouchScreen as /devices/virtual/input/input1 |
| 149 | [ 0.930000] input: PCF50633 PMU events as /devices/virtual/input/input2 |
| 150 | [ 0.935000] pcf50633-rtc pcf50633-rtc: rtc core: registered pcf50633-rtc as rtc0 |
| 151 | [ 0.935000] S3C24XX RTC, (c) 2004,2006 Simtec Electronics |
| 152 | [ 0.935000] i2c /dev entries driver |
| 153 | [ 0.940000] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics |
| 154 | [ 0.940000] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled |
| 155 | [ 0.940000] cpuidle: using governor ladder |
| 156 | [ 0.940000] s3c-sdi s3c2440-sdi: powered down. |
| 157 | [ 0.940000] s3c-sdi s3c2440-sdi: mmc0 - using pio, sw SDIO IRQ |
| 158 | [ 0.945000] glamo-mci glamo-mci.0: glamo_mci driver (C)2007 Openmoko, Inc |
| 159 | [ 0.945000] s3c-sdi s3c2440-sdi: running at 0kHz (requested: 0kHz). |
| 160 | [ 0.945000] glamo-mci glamo-mci.0: glamo_mci_set_ios: power down. |
| 161 | [ 0.945000] Registered led device: gta02:red:aux |
| 162 | [ 0.945000] Registered led device: gta02:orange:power |
| 163 | [ 0.945000] Registered led device: gta02:blue:power |
| 164 | [ 0.950000] Registered led device: gta02::vibrator |
| 165 | [ 0.950000] TCP westwood registered |
| 166 | [ 0.950000] NET: Registered protocol family 17 |
| 167 | [ 0.950000] Registering the dns_resolver key type |
| 168 | [ 0.960000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). |
| 169 | [ 0.970000] regulator_init_complete: ldo5: disabling |
| 170 | [ 0.975000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). |
| 171 | [ 0.975000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). |
| 172 | [ 0.975000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). |
| 173 | [ 0.990000] pcf50633-rtc pcf50633-rtc: setting system clock to 2000-01-01 00:00:22 UTC (946684822) |
| 174 | [ 0.995000] s3c-sdi s3c2440-sdi: running at 400kHz (requested: 400kHz). |
| 175 | [ 1.005000] mmc0: queuing unknown CIS tuple 0x01 (3 bytes) |
| 176 | [ 1.025000] mmc0: queuing unknown CIS tuple 0x1a (5 bytes) |
| 177 | [ 1.030000] mmc0: queuing unknown CIS tuple 0x1b (8 bytes) |
| 178 | [ 1.030000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz). |
| 179 | [ 1.030000] s3c-sdi s3c2440-sdi: running at 25000kHz (requested: 25000kHz). |
| 180 | [ 1.030000] mmc0: queuing unknown CIS tuple 0x80 (1 bytes) |
| 181 | [ 1.030000] mmc0: queuing unknown CIS tuple 0x81 (1 bytes) |
| 182 | [ 1.030000] mmc0: queuing unknown CIS tuple 0x82 (1 bytes) |
| 183 | [ 1.035000] mmc0: new SDIO card at address 0001 |
| 184 | [ 1.040000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 0kHz div=0 (req: 0kHz). Bus width=0 |
| 185 | [ 1.060000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 |
| 186 | [ 1.080000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 |
| 187 | [ 1.090000] glamo-mci glamo-mci.0: powered (vdd = 21) clk: 399kHz div=0 (req: 400kHz). Bus width=0 |
| 188 | [ 1.110000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 |
| 189 | [ 1.115000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 |
| 190 | [ 1.130000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 |
| 191 | [ 1.485000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 |
| 192 | [ 1.495000] mmc1: host does not support reading read-only switch. assuming write-enable. |
| 193 | [ 1.500000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 399kHz div=0 (req: 400kHz). Bus width=0 |
| 194 | [ 1.505000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 17000kHz). Bus width=0 |
| 195 | [ 1.510000] glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16373kHz div=0 (req: 17000kHz). Bus width=2 |
| 196 | [ 1.510000] mmc1: new high speed SD card at address 0007 |
| 197 | [ 1.525000] mmcblk0: mmc1:0007 SD2GB 1.80 GiB |
| 198 | [ 1.530000] mmcblk0: p1 p2 |
| 199 | [ 2.440000] Empty flash at 0x07eda044 ends at 0x07eda800 |
| 200 | [ 3.060000] VFS: Mounted root (jffs2 filesystem) on device 31:6. |
| 201 | [ 3.070000] devtmpfs: mounted |
| 202 | [ 3.070000] Freeing init memory: 120K |
| 203 | [ 3.955000] pcf50633 0-0073: usb curlim to 1000 mA |
| 204 | [ 4.625000] systemd[1]: systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ; debian) |
| 205 | [ 5.015000] systemd[1]: Inserted module 'autofs4' |
| 206 | [ 5.640000] NET: Registered protocol family 10 |
| 207 | [ 5.650000] systemd[1]: Inserted module 'ipv6' |
| 208 | [ 5.650000] systemd[1]: Set hostname to <om-gta02>. |
| 209 | [ 6.305000] systemd[1]: Cannot add dependency job for unit xinput-calibrator.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details. |
| 210 | [ 6.310000] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details. |
| 211 | [ 6.310000] systemd[1]: Expecting device dev-ttySAC2.device... |
| 212 | [ 6.315000] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. |
| 213 | [ 6.315000] systemd[1]: Started Forward Password Requests to Wall Directory Watch. |
| 214 | [ 6.315000] systemd[1]: Starting Remote File Systems. |
| 215 | [ 6.320000] systemd[1]: Reached target Remote File Systems. |
| 216 | [ 6.320000] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. |
| 217 | [ 6.325000] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. |
| 218 | [ 6.325000] systemd[1]: Starting Delayed Shutdown Socket. |
| 219 | [ 6.325000] systemd[1]: Listening on Delayed Shutdown Socket. |
| 220 | [ 6.330000] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. |
| 221 | [ 6.330000] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. |
| 222 | [ 6.330000] systemd[1]: Starting udev Kernel Socket. |
| 223 | [ 6.335000] systemd[1]: Listening on udev Kernel Socket. |
| 224 | [ 6.335000] systemd[1]: Starting udev Control Socket. |
| 225 | [ 6.340000] systemd[1]: Listening on udev Control Socket. |
| 226 | [ 6.340000] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. |
| 227 | [ 6.340000] systemd[1]: Starting Swap. |
| 228 | [ 6.345000] systemd[1]: Reached target Swap. |
| 229 | [ 6.345000] systemd[1]: Starting Journal Socket. |
| 230 | [ 6.350000] systemd[1]: Listening on Journal Socket. |
| 231 | [ 6.350000] systemd[1]: Started File System Check on Root Device. |
| 232 | [ 6.350000] systemd[1]: Starting Remount Root and Kernel File Systems... |
| 233 | [ 6.400000] systemd[1]: Starting Load Kernel Modules... |
| 234 | [ 6.420000] systemd[1]: Started Set Up Additional Binary Formats. |
| 235 | [ 6.430000] systemd[1]: Starting Apply Kernel Variables... |
| 236 | [ 6.455000] systemd[1]: Mounted Huge Pages File System. |
| 237 | [ 6.460000] systemd[1]: Starting Journal Service... |
| 238 | [ 6.505000] systemd[1]: Started Journal Service. |
| 239 | [ 6.515000] systemd[1]: Started Machine ID first boot configure. |
| 240 | [ 6.515000] systemd[1]: Mounted POSIX Message Queue File System. |
| 241 | [ 6.515000] systemd[1]: Starting udev Kernel Device Manager... |
| 242 | [ 6.550000] systemd[1]: Starting udev Coldplug all Devices... |
| 243 | [ 7.085000] HIFInit |
| 244 | [ 7.765000] systemd-udevd[49]: starting version 195 |
| 245 | [ 8.080000] systemd-modules-load[43]: Inserted module 'ar6000' |
| 246 | [ 8.450000] Bluetooth: Core ver 2.16 |
| 247 | [ 8.450000] NET: Registered protocol family 31 |
| 248 | [ 8.450000] Bluetooth: HCI device and connection manager initialized |
| 249 | [ 8.450000] Bluetooth: HCI socket layer initialized |
| 250 | [ 8.450000] Bluetooth: L2CAP socket layer initialized |
| 251 | [ 8.525000] systemd-udevd[49]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/60-gpsd.rules:43 |
| 252 | [ 8.525000] systemd-udevd[49]: invalid rule '/etc/udev/rules.d/60-gpsd.rules:43' |
| 253 | [ 8.540000] Bluetooth: SCO socket layer initialized |
| 254 | [ 8.590000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 |
| 255 | [ 8.590000] Bluetooth: BNEP filters: protocol multicast |
| 256 | [ 8.635000] systemd-modules-load[43]: Inserted module 'bnep' |
| 257 | [ 9.080000] bq27000-battery bq27000-battery.0: support ver. 1.2.0 enabled |
| 258 | [ 10.005000] usbcore: registered new interface driver usbfs |
| 259 | [ 10.005000] usbcore: registered new interface driver hub |
| 260 | [ 10.025000] usbcore: registered new device driver usb |
| 261 | [ 10.075000] Bluetooth: Generic Bluetooth USB driver ver 0.6 |
| 262 | [ 10.075000] usbcore: registered new interface driver btusb |
| 263 | [ 10.150000] s3c2410_udc: debugfs dir creation failed -19 |
| 264 | [ 10.165000] s3c2440-usbgadget s3c2440-usbgadget: S3C2440: increasing FIFO to 128 bytes |
| 265 | [ 10.275000] usb0: MAC 00:1f:11:01:97:34 |
| 266 | [ 10.275000] usb0: HOST MAC 00:1f:11:01:97:35 |
| 267 | [ 10.275000] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008 |
| 268 | [ 10.275000] g_ether gadget: g_ether ready |
| 269 | [ 10.385000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 |
| 270 | [ 10.575000] g_ether gadget: full speed config #1: CDC Ethernet (ECM) |
| 271 | [ 10.680000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver |
| 272 | [ 10.680000] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI |
| 273 | [ 10.680000] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1 |
| 274 | [ 10.750000] systemd-journald[46]: Received SIGUSR1 |
| 275 | [ 10.770000] systemd-journald[46]: Failed to open system journal: Invalid argument |
| 276 | [ 10.845000] s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000 |
| 277 | [ 10.900000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 |
| 278 | [ 10.900000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 |
| 279 | [ 10.900000] usb usb1: Product: S3C24XX OHCI |
| 280 | [ 10.900000] usb usb1: Manufacturer: Linux 2.6.39.4 ohci_hcd |
| 281 | [ 10.900000] usb usb1: SerialNumber: s3c24xx |
| 282 | [ 10.905000] hub 1-0:1.0: USB hub found |
| 283 | [ 10.905000] hub 1-0:1.0: 2 ports detected |
| 284 | [ 11.050000] PPP generic driver version 2.4.2 |
| 285 | [ 11.210000] Bluetooth: RFCOMM TTY layer initialized |
| 286 | [ 11.210000] Bluetooth: RFCOMM socket layer initialized |
| 287 | [ 11.210000] Bluetooth: RFCOMM ver 1.11 |
| 288 | [ 11.320000] usb 1-1: new full speed USB device number 2 using s3c2410-ohci |
| 289 | [ 11.900000] usb 1-1: New USB device found, idVendor=0a12, idProduct=0001 |
| 290 | [ 11.900000] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 |
| 291 | [ 12.580000] asoc: wm8753-hifi <-> s3c24xx-iis mapping ok |
| 292 | }}} |