Changeset 9f554e64 in mainline

Timestamp:

2011-02-22T13:51:21Z (13 years ago)

Author:

Vojtech Horky <vojtechhorky@…>

Branches:

lfn, master, serial, ticket/834-toolchain-update, topic/msim-upgrade, topic/simplify-dev-export

Children:

e936e8e

Parents:

0f21c0c (diff), dbe25f1 (diff)
Note: this is a merge changeset, the changes displayed below correspond to the merge itself.
Use the (diff) links above to see all the changes relative to each parent.

Message:

Merge development/ changes

File:

• uspace/drv/usbhub/usbhub.c (modified) (8 diffs)

uspace/drv/usbhub/usbhub.c

@@ -50 +50 @@
 #include "usb/usb.h"
 #include "usb/pipes.h"
+#include "usb/classes/classes.h"
 
 static device_ops_t hub_device_ops = {
         .interfaces[USB_DEV_IFACE] = &usb_iface_hub_impl
 };
+
+/** Hub status-change endpoint description */
+static usb_endpoint_description_t status_change_endpoint_description = {
+        .transfer_type = USB_TRANSFER_INTERRUPT,
+        .direction = USB_DIRECTION_IN,
+        .interface_class = USB_CLASS_HUB,
+        .flags = 0
+};
+
 
 //*********************************************
@@ -61 +71 @@
 //*********************************************
 
+/**
+ * Initialize connnections to host controller, device, and device
+ * control endpoint
+ * @param hub
+ * @param device
+ * @return
+ */
+static int usb_hub_init_communication(usb_hub_info_t * hub){
+        int opResult;
+        opResult = usb_device_connection_initialize_from_device(
+                        &hub->device_connection,
+                        hub->device);
+        if(opResult != EOK){
+                dprintf(USB_LOG_LEVEL_ERROR,
+                                "could not initialize connection to hc, errno %d",opResult);
+                return opResult;
+        }
+        opResult = usb_hc_connection_initialize_from_device(&hub->connection,
+                        hub->device);
+        if(opResult != EOK){
+                dprintf(USB_LOG_LEVEL_ERROR,
+                                "could not initialize connection to device, errno %d",opResult);
+                return opResult;
+        }
+        opResult = usb_endpoint_pipe_initialize_default_control(&hub->endpoints.control,
+            &hub->device_connection);
+        if(opResult != EOK){
+                dprintf(USB_LOG_LEVEL_ERROR,
+                                "could not initialize connection to device endpoint, errno %d",opResult);
+        }
+        return opResult;
+}
+
+/**
+ * When entering this function, hub->endpoints.control should be active.
+ * @param hub
+ * @return
+ */
+static int usb_hub_process_configuration_descriptors(
+        usb_hub_info_t * hub){
+        if(hub==NULL) {
+                return EINVAL;
+        }
+        int opResult;
+        
+        //device descriptor
+        usb_standard_device_descriptor_t std_descriptor;
+        opResult = usb_request_get_device_descriptor(&hub->endpoints.control,
+            &std_descriptor);
+        if(opResult!=EOK){
+                dprintf(USB_LOG_LEVEL_ERROR, "could not get device descriptor, %d",opResult);
+                return opResult;
+        }
+        dprintf(USB_LOG_LEVEL_INFO, "hub has %d configurations",
+                        std_descriptor.configuration_count);
+        if(std_descriptor.configuration_count<1){
+                dprintf(USB_LOG_LEVEL_ERROR, "THERE ARE NO CONFIGURATIONS AVAILABLE");
+                //shouldn`t I return?
+        }
+
+        //configuration descriptor
+        /// \TODO check other configurations
+        usb_standard_configuration_descriptor_t config_descriptor;
+        opResult = usb_request_get_bare_configuration_descriptor(
+            &hub->endpoints.control, 0,
+        &config_descriptor);
+        if(opResult!=EOK){
+                dprintf(USB_LOG_LEVEL_ERROR, "could not get configuration descriptor, %d",opResult);
+                return opResult;
+        }
+        //set configuration
+        opResult = usb_request_set_configuration(&hub->endpoints.control,
+                config_descriptor.configuration_number);
+
+        if (opResult != EOK) {
+                dprintf(USB_LOG_LEVEL_ERROR,
+                                "something went wrong when setting hub`s configuration, %d",
+                                opResult);
+                return opResult;
+        }
+        dprintf(USB_LOG_LEVEL_DEBUG, "\tused configuration %d",
+                        config_descriptor.configuration_number);
+
+        //full configuration descriptor
+        size_t transferred = 0;
+        uint8_t * descriptors = (uint8_t *)malloc(config_descriptor.total_length);
+        if (descriptors == NULL) {
+                dprintf(USB_LOG_LEVEL_ERROR, "insufficient memory");
+                return ENOMEM;
+        }
+        opResult = usb_request_get_full_configuration_descriptor(&hub->endpoints.control,
+            0, descriptors,
+            config_descriptor.total_length, &transferred);
+        if(opResult!=EOK){
+                free(descriptors);
+                dprintf(USB_LOG_LEVEL_ERROR,
+                                "could not get full configuration descriptor, %d",opResult);
+                return opResult;
+        }
+        if (transferred != config_descriptor.total_length) {
+                dprintf(USB_LOG_LEVEL_ERROR,
+                                "received incorrect full configuration descriptor");
+                return ELIMIT;
+        }
+
+        /**
+         * Initialize the interrupt in endpoint.
+         * \TODO this code should be checked...
+         */
+        usb_endpoint_mapping_t endpoint_mapping[1] = {
+                {
+                        .pipe = &hub->endpoints.status_change,
+                        .description = &status_change_endpoint_description,
+                        .interface_no =
+                            usb_device_get_assigned_interface(hub->device)
+                }
+        };
+        opResult = usb_endpoint_pipe_initialize_from_configuration(
+            endpoint_mapping, 1,
+            descriptors, config_descriptor.total_length,
+            &hub->device_connection);
+        if (opResult != EOK) {
+                dprintf(USB_LOG_LEVEL_ERROR,
+                                "Failed to initialize status change pipe: %s",
+                    str_error(opResult));
+                return opResult;
+        }
+        if (!endpoint_mapping[0].present) {
+                dprintf(USB_LOG_LEVEL_ERROR,"Not accepting device, " \
+                    "cannot understand what is happenning");
+                return EREFUSED;
+        }
+
+        free(descriptors);
+        return EOK;
+        
+
+        // Initialize the interrupt(=status change) endpoint.
+        /*usb_endpoint_pipe_initialize(
+                &result->endpoints->status_change,
+                &result->device_connection, );USB_TRANSFER_INTERRUPT
+        USB_DIRECTION_IN*/
+
+}
+
+
+/**
+ * Create hub representation from device information.
+ * @param device
+ * @return pointer to created structure or NULL in case of error
+ */
 usb_hub_info_t * usb_create_hub_info(device_t * device) {
         usb_hub_info_t* result = usb_new(usb_hub_info_t);
-        usb_device_connection_initialize_from_device(&result->device_connection,
-                        device);
-        usb_hc_connection_initialize_from_device(&result->connection,
-                        device);
-        usb_endpoint_pipe_initialize_default_control(&result->endpoints.control,
-            &result->device_connection);
-        
+        result->device = device;
+        int opResult;
+        opResult = usb_hub_init_communication(result);
+        if(opResult != EOK){
+                free(result);
+                return NULL;
+        }
 
         //result->device = device;
         result->port_count = -1;
-        /// \TODO is this correct? is the device stored?
         result->device = device;
 
         //result->usb_device = usb_new(usb_hcd_attached_device_info_t);
-        
+        size_t received_size;
+
         // get hub descriptor
-
         dprintf(USB_LOG_LEVEL_DEBUG, "creating serialized descripton");
         void * serialized_descriptor = malloc(USB_HUB_MAX_DESCRIPTOR_SIZE);
         usb_hub_descriptor_t * descriptor;
-        size_t received_size;
-        int opResult;
         dprintf(USB_LOG_LEVEL_DEBUG, "starting control transaction");
         usb_endpoint_pipe_start_session(&result->endpoints.control);
@@ -93 +251 @@
         usb_endpoint_pipe_end_session(&result->endpoints.control);
 
-        /* Initialize the interrupt endpoint. 
-        usb_endpoint_pipe_initalize(
-                &hub_data->endpoints->status_change,
-                &endpiont_descriptor, &hub_data->connection);
-
-         */ /// \TODO add this call
-
         if (opResult != EOK) {
                 dprintf(USB_LOG_LEVEL_ERROR, "failed when receiving hub descriptor, badcode = %d",opResult);
@@ -112 +263 @@
                 return result;
         }
+
+        
         dprintf(USB_LOG_LEVEL_INFO, "setting port count to %d",descriptor->ports_count);
         result->port_count = descriptor->ports_count;
@@ -133 +286 @@
 }
 
+/**
+ * Create hub representation and add it into hub list
+ * @param dev
+ * @return
+ */
 int usb_add_hub_device(device_t *dev) {
         dprintf(USB_LOG_LEVEL_INFO, "add_hub_device(handle=%d)", (int) dev->handle);
 
-        /*
-         * We are some (probably deeply nested) hub.
-         * Thus, assign our own operations and explore already
-         * connected devices.
-         */
         dev->ops = &hub_device_ops;
 
-
         usb_hub_info_t * hub_info = usb_create_hub_info(dev);
+
+        int opResult;
+
+        //perform final configurations
         usb_endpoint_pipe_start_session(&hub_info->endpoints.control);
-
+        // process descriptors
+        opResult = usb_hub_process_configuration_descriptors(hub_info);
+        if(opResult != EOK){
+                dprintf(USB_LOG_LEVEL_ERROR,"could not get condiguration descriptors, %d",
+                                opResult);
+                return opResult;
+        }
+        //power ports
+        usb_device_request_setup_packet_t request;
         int port;
-        int opResult;
-        //usb_target_t target;
-        //target.address = hub_info->usb_device->address;
-        //target.endpoint = 0;
-
-        //get configuration descriptor
-        // this is not fully correct - there are more configurations
-        // and all should be checked
-        usb_standard_device_descriptor_t std_descriptor;
-        opResult = usb_request_get_device_descriptor(&hub_info->endpoints.control,
-            &std_descriptor);
-        if(opResult!=EOK){
-                dprintf(USB_LOG_LEVEL_ERROR, "could not get device descriptor, %d",opResult);
-                return opResult;
-        }
-        dprintf(USB_LOG_LEVEL_INFO, "hub has %d configurations",std_descriptor.configuration_count);
-        if(std_descriptor.configuration_count<1){
-                dprintf(USB_LOG_LEVEL_ERROR, "THERE ARE NO CONFIGURATIONS AVAILABLE");
-                //shouldn`t I return?
-        }
-        /// \TODO check other configurations
-        usb_standard_configuration_descriptor_t config_descriptor;
-        opResult = usb_request_get_bare_configuration_descriptor(
-            &hub_info->endpoints.control, 0,
-        &config_descriptor);
-        if(opResult!=EOK){
-                dprintf(USB_LOG_LEVEL_ERROR, "could not get configuration descriptor, %d",opResult);
-                return opResult;
-        }
-        //set configuration
-        opResult = usb_request_set_configuration(&hub_info->endpoints.control,
-    config_descriptor.configuration_number);
-
-        if (opResult != EOK) {
-                dprintf(USB_LOG_LEVEL_ERROR, "something went wrong when setting hub`s configuration, %d", opResult);
-        }
-
-        usb_device_request_setup_packet_t request;
         for (port = 1; port < hub_info->port_count+1; ++port) {
                 usb_hub_set_power_port_request(&request, port);
@@ -196 +322 @@
         }
         //ports powered, hub seems to be enabled
-
         usb_endpoint_pipe_end_session(&hub_info->endpoints.control);
-        //async_hangup(hc);
 
         //add the hub to list
@@ -208 +332 @@
         //(void)hub_info;
         usb_hub_check_hub_changes();
-
         
-
         dprintf(USB_LOG_LEVEL_INFO, "hub dev added");
         //address is lost...
@@ -216 +338 @@
                         //hub_info->endpoints.control.,
                         hub_info->port_count);
-        dprintf(USB_LOG_LEVEL_DEBUG, "\tused configuration %d",config_descriptor.configuration_number);
 
         return EOK;